• Title/Summary/Keyword: 치아교모도

Search Result 35, Processing Time 0.029 seconds

Study on the Dental Attrition of the Patients with Craniomandibular Disorders using Age Estimation (연령감정을 이용한 두개하악장애환자의 치아 교모도에 관한 연구)

  • Se-Yong Lee;Ki-Suk Kim
    • Journal of Oral Medicine and Pain
    • /
    • v.20 no.2
    • /
    • pp.421-427
    • /
    • 1995
  • 두개하악장애는 저작근, 측두하악관절 및 그와 관련된 구조물의 많은 임상적인 문제를 포함하는 포괄적인 용어이다. 두개하악장애의 원인은 다양하고 종종 다인성이며 위험을 증가시키는 여러가지 소인들이 존재한다. 이갈이나 이악물기 같은 이상기능습관은 흔하며 또한 임상적으로 많은 관련이 있는 것으로 사료된다. 그러나 이전의 연구에서는 연령증가에 따른 기능적 마모를 고려한 치아교모에 관한 연구가 시행되지 않고 단순한 교모도의 평가비교만이 시행되었다. 본 연구는 법치의학적 연령감정에서 널리 사용되고 있느 치아교모도를 이용한 연령감정법을 이용하여 두개하악장애환자의 치아교모도에 관한 연구를 시행하였다. 연령은 기능적마모에 따른 정도를 평가하기 위해서 고려되었다. 단국대학교 치과병원 구강내과에서 두개하악장애로 진단된 환자18명과 대조군으로 외래환자 14명을 대상으로 하였다. 연령차는 연령감정법의 추정연령과 환자의 실제나이의 차이를 구해서 비교분석하였다. 이상의 결과로 두개하악장애환자의 중절치, 측절치, 제1소구치, 제2소구치의 치아교모도가 정상군보다 유의성 있게 높았다.

  • PDF

Comparison of Dental Ages Estimated according to Oral Habit for the Patients with Temporomandibular Disorders (측두하악장애환자의 구강습관에 따른 치아감정연령의 비교)

  • Lee, Won-Seop;Kim, Ki-Suk
    • Journal of Oral Medicine and Pain
    • /
    • v.32 no.4
    • /
    • pp.431-439
    • /
    • 2007
  • This study was performed to investigate the dental ages of the patients with temporomandibular disorders(TMD), using a method of age estimation by dental attrition, and to compare the differences of dental ages between control and experimental groups. In addition, they were compared according to oral habit. Clinical evaluations for the tooth attrition were to examine the study models of 65 TMD patients (mean age of 26.6 years, aged 18 to 40) had visited to the Department of Oral Medicine and Orofacial Pain Clinic, Dental Hospital, Dankook University as a experimental group and 22 volunteers (mean age of 25.4 years, aged 23 to 36) without TMD as a control group. Age differences were calculated subtracting real age from estimated age. Age differences between experimental and control groups were compared statistically between groups classified according to oral habit. As a results, dental age was increased significantly in TMD patients compared with normal subjects. Oral parafunctions which increased dental age were bruxism, clenching and heavy chewing in order. Conclusively, it should be consider that there can be much discrepancy between real age and age estimated by dental attrition in patients with TMD. In addition, it is suggested that dentists should try to protect the tooth from attrition by various parafunction on treating the patients with TMD.

The Effectiveness of Age Estimation Method by Occlusal Tooth Wear in Temporomandibular Disorder(TMD) Patients (측두하악장애 환자에서 치아 교모도에 의한 연령감정의 유효성)

  • Jeong, Jae-Yong;Kim, Young-Jun;Kim, Cheul;Park, Moon-Soo
    • Journal of Oral Medicine and Pain
    • /
    • v.33 no.3
    • /
    • pp.269-277
    • /
    • 2008
  • The purpose of this study was to estimate occlusal tooth wear and bruxism severity in TMD patients, and evaluate the effectiveness of the present age estimation method by occlusal tooth wear in TMD patients. Takei's age estimation method was applied to 163 subjects(56 controls, 107 TMD patients). The author analyzed the degree of occlusal tooth wear from the difference between estimated age and actual age. The obtained results were as follows: 1. In all age group, occlusal tooth wear in TMD patients is higher than those in asymptomatic controls. In 20's age group, a statistically significant difference was found. 2. In both gender, occlusal tooth wear in TMD patients is higher than those in asymptomatic control. In male, a significant difference was found. 3. Occlusal tooth wear in TMD patients with bruxism is significantly higher than that in control. 4. We found no significant difference in bruxism severity and occlusal tooth wear among the RDC/TMD subgroups. 5. Application of Takei's method would be still useful for age estimation in Korean. In case of age estimation of TMD patients using occlusal tooth wear, evaluation of the bruxism severity and appropriate correction according to age, sex and difference of geographical location should be considered.

The attrition pattern in Angle Class III malocclusion with facial astmmetry (안면비대칭을 동반한 Angle III급 부정교합자의 교모양상)

  • Son, Woo-Sung;Jeon, Eun-Ye;Kim, Sung-Jo
    • The korean journal of orthodontics
    • /
    • v.27 no.4 s.63
    • /
    • pp.549-557
    • /
    • 1997
  • This study was designed to investigate the attrition pattern in Angle Class III malocclusion with facial asymmetry. The sample consisted of three groups, the 20 subjects of normal occlusion group(Group I), the 12 subjects of class III malocclusion without facial asymmetry group(Group II) and 17 subjects of Class III malocclusion with facial asymmetry group(Group III). Attrition areas from canine to second molar on both sides in upper and lower arch, totally twenty, was marked by pencil and mesured by computer system(INTERGRAPH CO. USA) 2 times and the average value was used for date processing. Attrition areas from canine to second molar on both sides in upper and lower arch, totally twenty, was marked by pencil and mesured by computer system(INTERGRAPH CO. USA) 2 times and the average value was used for date Processing. All attrition areas were measured 2 times and the average value was used for data processing The data were statistically analyzed by SAS program. The results of this study were as follows. 1. Total attrition area in Group I was larger than in Group II and III. 2. There was no significant difference in attrition area between right and left side in each group, but attrition area in Group III was larger than in Group I and II. 3. In Group I, Maxillary attrition area was larger than mandibular attrition area, but in Group ll and III, there was no significant difference in attrition area between maxilla and mandible. 4. In Group III, the attrition area of deviated side was target than undeviated side 5. There was no significant difference in attrition area between chewing side and non-chewing side in each group. 6. The total attrition area was unaffected by gender.

  • PDF

A case of direct restore using 4-META/MMA-TBB resin containing organic filler in patients with severe occlusal surface wear and enamel fracture (심한 교합면 마모 및 교두 파절 환자에서 유기필러를 함유한 4-META/MMA-TBB 레진을 활용한 직접수복 증례)

  • Dae-Sik Kim;Gyeong-Je Lee
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.39 no.4
    • /
    • pp.222-228
    • /
    • 2023
  • Attrition is the loss of tooth hard tissue due to contact between teeth, and in severe cases, dentin is exposed, accompanied by selective corrosion and excessive wear of teeth, which is called cupping. If these lesions are left untreated, the size of the lesion gradually increases, breaking the unsupported enamel, resulting in a decrease in aesthetics and chewing function. In this case report, patients with cupping and enamel fracture due to severe attrition were directly restored using a resin with soft properties containing organic fillers. In the follow-up observation six years later, most of the filling of the occlusal surface was eliminated, but the filling on the buccal surfaces remained relatively intact, and it was confirmed that this type of resin was suitable for the area where the occlusal force was relatively weak rather than the area where the occlusal force was greatly applied.

The interpretation of tooth wear - literature review (치아 마모의 해석-논문 고찰)

  • Hwang, Soo-Jeong;Seo, Min-Seock
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.34 no.3
    • /
    • pp.137-146
    • /
    • 2018
  • Tooth wear is a multifactorial condition, leading to the loss of dental hard tissues. While for many years, tooth wear was a condition of little interest in daily clinical practice, nowadays this is changed. Tooth wear is becoming increasingly significant in maintaining the long-term health of the dentition. This becomes especially important when the dentition is kept relatively intact in the contemporary ageing population, and edentulism is decreasing. There is also evidence that the prevalence of tooth wear is growing. It is a natural consequence of the unidirectionality of tooth wear that it is frequently used as a means of individual age estimation. Tooth wear was very serious in ancient populations up to the medieval period. Tooth wear is thus studied in a wide variety of areas. The purpose of this paper is to summarize and analyze the many issues surrounding tooth wear through recent studies in various fields and to search for future research direction.

노인환자의 보존치료

  • Im, Seong-Sam
    • The Journal of the Korean dental association
    • /
    • v.20 no.12 s.163
    • /
    • pp.1011-1013
    • /
    • 1982
  • 년령이 증가함에 다라 치아도 신체 다른부위와 같이 노화현상이 나타나는데, 특히 보존영역에서는 상아질 및 치수의 노화에 대한 지식은 매우 중요하다고 생각된다. 일반적으로 상아질 및 치수의 노화는 치수강이나 치근관내 석회화된 조직의 양이 증가하고 세포나 혈관의 수가 감소되는 현상으로 나타나며, 임상에서는 흔히 치수강이나 치근관내 pub stone이나 dystrophic calcification을 발견하게 된다. 이러한 노화현상은 년령이 증가한다는 요소외도 우식, 마모, 교모, 또는 치과시술등이 그 원인이 된다고 알려져 있으며 실제 젊은환자에서도 상아질 및 치수가 노화되어 있는 치아를 볼 수 있다. 그러나 대개 년령적으로는 50세에서 60세사이의 환자에서는 치아의 노화가 있을수있는 가능성이 많다고 알려져 있으므로 임상에서 이점을 고려해야될 것으로 생각되며, 또 한가지는 상아질 및 치수에 이와같은 치유의 능력이 저하된다는 사실이다. 이러한 사실은 우리가 광범위한 충전물을 가진 치아에서 치수복조술을 시행할때는 충전물이 없고 우식이 생긴 치아에서 시술여부를 결정할 때 매우 중요한 점이 되고있는것 처럼 보존시술시 고려되어야 할 중요한 점으로 생각된다. 노인에서 보존치료의 결과는 환자가 신장질환이나 위장병, 폐결핵, 당뇨병등 만성적인 전신 질환을 가지고 있는 경우에는 그 치유가 지연되는 경우가 있기는 하나 시술시에 이러한 사실과 년령증가에 따른 치수 및 상아질의 형태학적 변화나 생리적변화등을 고려해서 치료술식을 약간 달리하면 젊은 환자에서와 똑같은 결과를 가져 올수 있다는 확신 또는 중요하다고 보겠다. 본 난에서는 노인환자의 보존치료시에 임상에서 고려해야할 사항들을 충전시술시와 근관치료시로 나누어서 각 시술 별로 간단히 살펴보조져 한다.

  • PDF

Analysis of Age Estimation Cases of Living Body Based on Dental aspect in Jeollabuk-do (전라북도 지역의 치과적 생체 연령추정 사례의 분석)

  • Eom, Ae-Ja;Suh, Bong-Jik
    • Journal of Oral Medicine and Pain
    • /
    • v.33 no.2
    • /
    • pp.167-176
    • /
    • 2008
  • We analyzed 121 age estimation clients who had visited oral medicine clinic, Chonbuk National University Hospital, from January 2000 to December 2007 to evaluate its characters in Jeonllabuk-do. The obtained results were as follows : 1. There was distinct difference in sex distribution(Male : 58.7%, Female : 41.3%) and more than half percent(55.4%) was over 50's. 2. The difference between registered and alleged age was the most in more than 5 years, and most of them were over 50's. 3. There were more clients who wanted to increase their age than to decrease and was no prominent difference in sex. Age estimation clients who wanted to decrease their age were predominant under 10 years old and in 20's, and those wanted to increase were predominant in 10's and over 30's. 4. The most reasons to correct age were related to welfare benefit. The purpose of age estimation was different according to each age groups; welfare benefit was the most over 50's, occupation in 40's and 50's, friendship in 30's and 40's, sibling-related in 50's, employment in 10's and 20's. 5. Age was estimated by the attrition of permanent tooth and pulp/tooth ratio from 20 years, root apex closure for 10's and calcification of permanent tooth under 10 years old. In cases that were difficult to estimate by use of the attrition of permanent tooth and pulp/tooth ratio, age was estimated by missing time of permanent tooth and the change of mandibular angle with age. 6. The estimated ages were close to alleged age in 77.7% of clients but the rest(22.3%) was close to registered age.

Full Mouth Rehabilitation in a Patient with Limited Restorable Space (수복 공간이 부족한 환자에서의 완전구강회복)

  • Lim, Kwang-Gil;Kim, Dae-Gon;Cho, Lee-Ra;Park, Chan-Jin
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.26 no.2
    • /
    • pp.145-156
    • /
    • 2010
  • Loss of posterior support may cause overloading and excessive wear of remaining teeth. Moreover, the extrusion of antagonistic teeth leads to the destruction of the occlusal plane. The loss of vertical dimension of occlusion (VDO) also emerges clinically, which may bring the loss of esthetic appearance and function. These patients who suffer from the loss of posterior support, often require vigorous periodontal treatments (osteotomy, crown lengthening) and extensive oral rehabilitation. Sixty three years old female patient visited for the prosthetic treatment of the posterior edentulous area. She had no other systematic disease and parafuctional habits for prosthetic treatment. Intraoral and radiographic examinations were done. The evaluation of VDO and vertical dimension of rest position were evaluated for proper prosthetic procedures and diagnostic wax up was done. As a result of diagnosis, VDO was increased by 2 mm considering the loss of VDO and space for the prosthetic treatment. After the pretreatments, initial preparation of teeth and provisionalization were carried out. Six weeks later of provisionalizaion, final preparation and impression was performed. Using the duralay resin copings, jaw relation was registered. The master cast was mounted and definitive restoration was fabricated. After the evaluation of esthetic and function, pick up impression for clinical remounting was done. Lucia jig was made for new jaw relation and occlusal adjustment on the articulator. Definitive restoration was delivered and the patient was periodically recalled for additional occlusal adjustment. From this case, the satisfactory functional and esthetic results through full mouth rehabilitation with increase vertical dimension were achieved.

Full mouth rehabilitation with fixed prostheses by increased vertical occlusal dimension using 3D printed splint in a patient with excessive tooth wear (과도한 치아 마모 환자의 3D 프린팅 교합안정장치를 이용한 수직 교합 고경 증가를 동반한 고정성 보철물 전악 수복 증례)

  • Se-Young Kim;Soo-Yeon Shin
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.61 no.3
    • /
    • pp.215-226
    • /
    • 2023
  • Severe wear of the anterior teeth facilitates the loss of anterior guidance, which protects the posterior teeth from wear during excursive movement. Additionally, when treating patients with collapsed occlusion due to multiple tooth loss and tooth wear, it is important to determine the presence of vertical dimension loss through accurate clinical and radiographic examinations and diagnostic wax-up. The patient of this case is a 44-year-old female patient who complained of overall tooth wear and loss of posterior teeth due to bruxism and clenching habits, visited the hospital with the address of restoring masticatory function and improving aesthetic appearance through prosthetic treatment. Through model analysis and diagnostic wax-up, an increase in vertical dimension was determined, and full mouth restoration with fixed prostheses was planned. The degree of adaptation to the vertical dimension was confirmed step by step using an occlusal splint designed with CAD (Computer aided design) software and 3-D (3-Dimensional) printed, and then restored with provisional restoration and after a 4-month adaptation period, the entire dentition was restored with metal ceramic crowns and implants. Through this procedure, satisfactory treatment results were obtained in terms of function and aesthetics.