• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05a
• /
• pp.269-272
• /
• 2003

그레이팅이라는 금속제품의 자동 설계 시스템인 GDS (Grating automatic Drawing System)는 기본 설계 도면(Plan Drawing)의 정보들을 바탕으로 여러 세부 도면들을 자동 생성하는 시스템이다. 그러나 GDS를 통해 자동 생성된 도면은 설계자들의 일반적인 치수기입 요령을 부분적으로 만족시키지 못하고 있으며 또 치수 표시간의 겹침 현상이 발생하여 설계자가 도면을 수정해야 하는 번거로움이 있었다. 본 논문은 이러한 문제점을 해결하기 위해, 설계 전문가들의 치수 표시법을 지식으로 하여 규칙 기반 전문가 시스템을 구성하였다.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.12
• /
• pp.943-952
• /
• 2003

GDS(Grating automatic Drawing System), which is an automatic design system of metal products called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the gratings such as locations, shapes, directions, etc. However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appears frequently. To solve the overlapping problem we applied the rule-based expert system which uses the expert's knowledges and facts to solve the problems. The rules for the expert system are designed based on the expertise of skilled layout designers within the grating production lines.

• Fiber Technology and Industry
• /
• v.9 no.1 s.33
• /
• pp.55-65
• /
• 2005

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.453-462
• /
• 2003

The pantyhose is a close-fitting garment, and consumers are highly sensitive to any progress made in fitting the garment to their lower body and increasing comfort. However, the pantyhose manufactured in Korea are only one-sized. The purpose of this study is to suggest a sizing system for pantyhose. The results of this study are as follows: 1. As a results of questions regarding the sizing system of pantyhose, 88.2% of people who responded to our questionnaire preferred multi-sized pantyhose. In particular, larger women opposed to thin women expressed some dissatisfaction in the length and the width of the pantyhose. In addition, most of women preferred an indication of the sizing system and the body size of the control dimension (body mass and height). 2. The 13 species of pantyhose that were manufactured abroad are of all sizes, and only one type of pantyhose is one-sized. However, most domestic pantyhose except one, are one-sized. 3. As a result of the experiment, the spandex content in pantyhose was approximately 12∼18%. Moreover, the elongation rate was approximately 200-370%, which differed according to the features of the material. The stretch size of the pantyhose had varies greatly, add has not yet been standardized. 4. The methods for indicating the pantyhose size in this study are the square method and the stair method. The characteristics of the square method are simple, but the coverage is relatively low. The characteristic of the stair method are so complicated that older women have a low preference for this method. However, the coverage rate is high.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2004.05a
• /
• pp.57-62
• /
• 2004

그레이팅(Grating)이라는 금속제품을 생산하는 5 업체에서는 설계 자동화 시스템인 GDS(Grating automatic Drawing System)를 통해 전체 설계도면(Plan Drawing)을 생성하고 GDS의 도면자료 자동생성 시스템(ASGS: Automatic Specification Generation System)을 통해 전체 도면상에 배치된 각각의 그레이팅에 대한 상세한 정보가 표현된 단품별 도면과 완성된 제품들에 대한 검사 기준을 표현한 검사도면을 생성하며 전체 제품에 대한 통계적인 정보를 생성한다. 그러나 도면자료 자동생성 시스템을 통해 자동 생성된 도면은 설계자들의 일반적인 치수 기입요령을 부분적으로 만족시키지 못하고 있으며 또 치수 표시간의 겹침 현상이 발생하여 설계자가 도면을 수정해야하는 번거로움이 있었다. 본 논문은 이러한 문제점을 해결하기 위해, 설계 전문가들의 치수 표시법을 지식으로 하는 규칙 기반 전문가 시스템을 구성하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.5 s.153
• /
• pp.779-787
• /
• 2006

Pantyhose is a close-fitting garment. Consumers are highly sensitive to any progress done in fitting their lower body and increasing comfort. However, pantyhose manufactured in Korea are only one-sized. The purpose of this study is to suggest the size designation of pantyhose, using new human body measurement data which were gained from the Year 2004 SIZE KOREA project. For the purpose of this study, the ISO standards and JIS standards were reviewed and questionnaire was carried out to manufacturers and distribution companies. The results are as follows: First, for a difference with size standards established in 2002, applicable age range was expanded from 15 to 70 year-old women to entirely include persons who wear panty hose. Secondly considering the actual condition that panty hose is producing in single size in most companies due to its elasticity of material, number of size was reduced from five to four. Thirdly basic parts of body which were applied to panty hose are height and hip girth. And size of panty hose is decided by a chart which is composed of height-axis and hip-axis.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.3
• /
• pp.155-165
• /
• 1989

In this paper, design equations for the calculation of the dimensions and characteristics of the ferrite magnet DC motor are derived. Through the computer iterative calculation applying the parameter survey method with those equations, the design method is presented. The following facts and the propriety of the design method are identified by comparing with the computer simulation results and dimension elements for the proposed motor. (1) The dimension ratio and the pole arc ratio as simulation parameters are in close connection with the dimension elements and motor performance, and those values of the parameter are important factor in determining the reasonable dimension of the motor. (2) It is proved that the minimization of the ferrite magnet volume is possible by representing the permeance coefficient as a function of the flux density ratio only. (3) It is shown that the torque equation suggested by introducing the copper loss area density of the conductors located in the slot is available in the determination of motor dimensions.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.3
• /
• pp.145-158
• /
• 2022

To grasp the size system of children's clothing online shopping malls, basic size charts for clothing products from 14 shopping malls were collected, compared, and analyzed. Looking at the age range of the basic size chart for each company, the minimum age is 1 year old, the maximum age is 14-15 years old, and all companies included ages up to 7 years. In addition, as for the number of size designations, children's clothing companies used seven to eight designations, and there were six types of size designation methods. Next, looking at the height range for each size, even with the same size designation method, the height range differed depending on the company. Also, the KS size standard does not consider body weight, but many companies use weight as a reference body size. Compared with the child body size data of the 6th Korean Body Size Data, the height and weight range for each size provided by the company showed differences between companies. The results of this study can be used in the future as basic data when revising and supplementing the clothing sizes in children's clothing companies.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.17-29
• /
• 2023

This study collected and analyzed reference information on the size labeling method and size of clothing products in 13 online shopping malls for plus size women in their 20s and 30s, and compared the size specification information focusing on jeans. First, in the results of examining the method of clothing size designation, clothing sizes indicated by 1, 2, 3 or physique designation (M, L, XL) differed between shopping malls, and even in the same shopping mall, even if the same size notation was used. Most the clothing sizes were different depending on the type of clothing. For bottoms, it was found that one company used seven size designation methods at the same time, two shopping malls used four size designation methods, and five shopping malls used three size designation methods. In the meantime, in the results of comparing the size specifications of jeans XL (size 88, 32 inches) by product part, for waist and hip circumferences, each of the eight companies showed that the size was smaller than the body size suggested by KS adult women's wear.

• Journal of the Korea Society for Simulation
• /
• v.13 no.4
• /
• pp.31-42
• /
• 2004

GDS (Grating automatic Drawing System), which is an automatic design system of a metal product called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the grating such as locations, shapes, directions, etc. However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appear frequently. To solve the overlapping problem we applied the rule-based expert system. The rules are designed based on the expertise of skilled layout designers within the grating production lines.