• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.802-809
• /
• 2017

3D printing technology is a manufacturing process for products, in which polymer and metal materials are laminated to form structures. It is advantageous for manufacturing parts requiring a high degree of design freedom and functionality. In addition, it would be a suitable technology for the production of parts for railway vehicles in the future, due to the need to produce parts in small quantities. In order to fully exploit the advantages of 3D printing technology, it is necessary to consider the process characteristics during the design of the product. In this study, the redesign and manufacturing technology of the product considering the performance and process conditions were studied for the heat exchanger in the air compressor of railway vehicles, as a trial application of the 3D printing technique. First of all, the design concept to improve the performance of the heat exchanger was defined, and the design range was specified to satisfy the performance of the present heat exchanger analyzed experimentally. Then, the detailed design was revised considering the characteristics of the metal 3D printing process, such as the manufacturing restrictions and production time. Based on the final design, the product was fabricated by the 3D printing process using aluminum material, and it was confirmed that the dimensional accuracy was satisfied. The weight of the final product was reduced by 41% compared with the existing products. The results of this study will make it possible to develop an efficient product design process for 3D printing technology.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1665-1673
• /
• 2013

Recently, the interest and demand on free formed structure providing aesthetic value as well as functionality has been increasing. Formwork has numerous advantages such as high strength, convenience, accuracy and good quality of surface roughness. Nevertheless, it increases construction cost and period to build complex shapes. For these purpose, deposition construction systems such as Contour Crafting and Concrete Printing have been developed with active collaboration between university and industry by applying the rapid prototyping technology to the construction industry in USA and England. Since there has been no related research in Korea, the possibility of spin-off technology and its fusion cannot be expected. In this paper, design elements including mechanical system and control system related to automatic deposition construction system prototype for constructing a free curved structure without mold are described. As for an appropriate material for the system, fiber reinforced mortar was selected by experiments on compressive strength, fluidity, viscosity and setting time. By performing transfer and extrusion experiments, the possibility of the development of deposition construction system was demonstrated. Based on this research results, it is required to keep the automatic deposition construction system improve and extend it into the new application area in construction industry.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.5
• /
• pp.356-362
• /
• 1999

Based on the assumption that film density increases exponentially with exposure in the industrial radiographic film. an equation representing the characteristic curves of industrial radiographic films and a new density-thickness relation are suggested. The accuracy and reliability of the suggested relation has been tested using radiographs of a carbon steel step wedge with known thickness variation by polychromatic X-ray and ${\gamma}$-ray ($Ir^{192}$). The experimental results were well agreed to the proposed relation in the range of film densities from 1.0 to 3.5 and it was more accurate than the conventional relation. It is also found that ${\gamma}$-ray is more effective in this purpose than polychromatic X-ray, which results in variation of effective linear absorption coefficient due to beam hardening effect as thickness increases. Therefore using the equation and experimentally determined parameters the quantitative evaluation of thickness variation is possible and it can be used to evaluate the depth of local corrosion of pressure vessels in plants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.12
• /
• pp.1765-1777
• /
• 2002

본 연구에서는 현재 국내의 서울시내에 거주하는 모터사이클을 타는 만20세 이상의 남성을 대상으로 모터사이클복에 대한 착용실태와 불만사항들을 조사하고 이를 연령별, 모터사이클 유형별로 비교 분석하여 착용감 및 안전성이 향상된 모터사이클복 개발을 위한 기초자료를 제시 하고자 하였다. 설문조사는 2002년 1월~3월까지 3개월간 총 400부를 배부한 후 회수하고, 이 중 262부를 분석자료로 사용하여 빈도 및 백분율, 평균 등의 기술 통계치를 얻어 전반적인 착용현황을 알아보고, 교차분석을 실시한 후 X$^2$-검증을 실시하여 연령별, 모터사이클 유형별, 운행경력 별로 통계적인 차이를 비교 분석하였다. 1. 모터사이클복의 착용실태 및 불만사항 전반에 관한 조사결과, 조사대상자는 20대~40대의 운행경력은 5년 이상인 전문 라이더들이 많았으며 모터사이클의 배기량은 400cc이상이 가장 높게 나타났고, 모터사이클 유형은 로드 바이크가 가장 높게 나타났고, 이용목적은 레져.취미용, 선호하는 모터사이클복 아이템별 소재는 원피스와 슬랙스의 경우에는 피혁소재가 쟈켓의 경우에는 텍스타일 소재가 높게 나타났다. 아이템별 소유는 쟈켓과 투피스가 높게 나타났고, 보호구가 필요하다고 생각되는 신체부위는 상의에서는 가슴과 팔꿈치, 하의에서는 무릎으로 나타났으며, 무릎보호대의 소유도가 가장 높게 나타났다. 모터사이클복 주된 착용목적은 '부상방지', 모터사이클복을 착용하지 않는 이유는 '움직이기가 불편해서' '가격이 비싸서' '여름철에 더워서'가 각각 높게 나타났다. 모터사이클복에 대한 불만족도에서 동작적합성과 사이즈에 대한 불만도가 높게 나타났고, 모터사이클복소재 및 내부 장착 보호장구의 경량화가 요구되었으며, 모터사이클 쟈켓의 치수부적합부위는 소매길이가 가장높게 나타났다. 2. 전체 응답자의 연령을 20대, 30대, 40대 이상으로 나누어 연령별 차이를 비교한 결과 각각의 문항에 대해서 모두 연령대별로 유의차가 인정되었다. 3. 모터사이클복 아이템별 선호소재 문항에서 원피스와 쟈켓에서 모터사이클 기종별 유의차가 나타났는데, 비즈니스 기종에 서는 텍스타일 소재를, 아메리칸크루져 기종에서는 피혁소재를 선호하였다. 로드바이크와 오프로드 기종에서는 원피스는 피혁소재를 선호하였고, 쟈켓은 텍스타일 소재를 선호하는 것으로 나타났다.

• Korean Journal of Human Ecology
• /
• v.10 no.4
• /
• pp.379-390
• /
• 2001

The purpose of this study is to investigate the fitness according to drafting method of the block patterns for women in Korea. The major findings of this study are as follows: 1. According to comparative analysis of required measurements, two measurements of back length and bust girth are used in Proportional Drafting Method (Munhwa). In case of Compromise Drafting Methods are used across chest, across back, bust length, bust width, full length in front, across shoulder and shoulder length in addition to back length and bust girth. The type of Armstrong as a Short Measure Drafting Method uses 10 measurements for the drafting the bodice. 2. While Esmod block pattern arid Armstrong's block pattern are the lightest in full width and other widths. Rasara block pattern is the most ample. In Lee, Myung-hee's block pattern and Lee, Hyung-sook's block pattern, amounts of drooping are decided $3{\sim}4cm$, but drooping amounts of other block patterns are decided corresponding to real measurements. While cap height in Esmod and Armstrong's sleeve patterns are directly measured Armhole length of the block pattern, cap height of other sleeve patterns are used armhole depth and cap height length as well as armhole length. 3. When analyzing to indirect measurements, Esmod block pattern shows the least different between full length of block pattern and that of body form. Munhwa block pattern and Kim, Hyosook's block pattern are mostly same to body form back length. However all of the block patterns are sheller than body form length. In case of Suh, Wansuk's block pattern, across back and across chest are same size, but other block patterns show difference between across back and across chest. Most block patterns' neck width in front and bach bodice are almost same. Front neck width is generally bigger than back neck width in some cases.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.553-558
• /
• 2010

This study was conducted to clarify the differences in rodents population densities between natural restored and red pine silvicultured forests after forest fire in Samcheok, Gangwon Province, Korea from March to December 2008. One ha size of 3 study plots were set up in each natural restored and silvicultured stand. We trapped the small rodents during 4 consecutive nights every 2 months in each stand. Understory coverage and number of shrub stems were higher in silvicultured stand than in natural restored stand. Coverage of overstory, suboverstory and midstory, number of tree stem, woody seedling stems and dead wood, and amount of coarse woody debris were higher in natural restored stand than in silvicultured stand. Six hundred eighty eight individuals of four species, such as Apodemus agrarius, A. peninsulae, Eothenomys regulus and Tamias sibiricus were captured in our study. Number of captured small rodents were higher in natural restored stand than in silvicultured stand. Also, species compositions were differed in both stands. The captured number of A. agrarius and A. peninsulae were most highest in April and December. E. regulus were shown higher number of captured in April and June, and T. sibiricus were in June and October. Removal of coarse woody debris and silvicultural practice would not be good for the inhabitation of small rodents. For the conservation of small rodents diversity, management of understory and canopy would be needed in forest fired area.

• Korean Journal of Environment and Ecology
• /
• v.38 no.2
• /
• pp.169-177
• /
• 2024

This study investigated whether population dynamic analysis based on the height characteristics of Abies nephrolepis was feasible. It was necessary because existing population dynamic analyses based on age and diameter at breast height (DBH) made it difficult to reflect the slow growth characteristics of Abies nephrolepis in harsh environments of high altitudes. The limitations of population dynamics analysis based on the age and DBH distribution of Abies nephrolepis in Seoraksan, Odaesan, and Taebaeksan National Parks, where Abies nephrolepis populations are representative, were verified, and the characteristics of height growth were investigated to comprehensively analyze whether a vertical structure based on height could reveal the population dynamics. The result of this study showed some limitations in understanding the population dynamics of Abies nephrolepis based on age distribution due to practical difficulties in sampling all trees and variations in age distribution within the same community depending on factors such as light conditions. Moreover, it was challenging to differentiate the distribution of DBH classes at fine levels, making it difficult to reflect the rapid growth characteristics of Abies nephrolepis when light conditions become suitable after prolonged stays in smaller DBH classes under shade conditions. However, a comprehensive analysis of the height characteristics of Abies nephrolepis revealed that the density corresponding to the population dynamic characteristics of Abies was high and adequately reflected the predominant tree death at similar height stages, as well as the U-shaped population dynamics at the lower stratum. Moreover, it was possible to identify a transition point in height values under shaded conditions, where the annual growth of Abies nephrolepis individuals in the lower stratum increases significantly, indicating that Abies nephrolepis individuals can escape from competition with other shrubs and undergo vigorous growth only at this height level. Therefore, this study confirmed that a vertical structure based on height can be utilized to understand the population dynamics of Abies nephrolepis in high altitudes, and it is expected that future studies on height characteristics can intuitively reveal the maintenance status of Abies nephrolepis populations in the field.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.254-259
• /
• 2014

A pressurized heavy water reactor (PHWR) core has 380 fuel channels contained and supported by a horizontal cylindrical vessel known as the calandria, whereas a pressurized water reactor (PWR) has only a single reactor vessel. The pressure tube, which is a pressure-retaining component, has a 103.4 mm inside diameter ${\times}$ 4.19 mm wall thickness, and is 6.36 m long, made of a zirconium alloy (Zr-2.5 wt% Nb). This provides support for the fuel while transporting the $D_2O$ heat-transfer fluid. The simple tubular geometry invites highly automated inspection, and good approach for all inspection. Similar to all nuclear heat-transfer pressure boundaries, the PHWR pressure tube requires a rigorous, periodic inspection to assess the reactor integrity in accordance with the Korea Nuclear Safety Committee law. Volumetric-based nondestructive evaluation (NDE) techniques utilizing ultrasonic and eddy current testing have been adopted for use in the periodic inspection of the fuel channel. The eddy current testing, as a supplemental NDE method to ultrasonic testing, is used to confirm the flaws primarily detected through ultrasonic testing, however, eddy current testing offers a significant advantage in that its ability to detect surface flaws is superior to that of ultrasonic testing. In this paper, effectiveness of flaw detection and the depth sizing capability by eddy current testing for the inside surface of a pressure tube, will be introduced. As a result of this examination, the ET technique is found to be useful only as a detection technique for defects because it can detect fine defects on the surface with high resolution. However, the ET technique is not recommended for use as a depth sizing method because it has a large degree of error for depth sizing.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.392-400
• /
• 2007

This experiment was conducted to evaluate effects of various periods of rye silage feeding on the growth performance, blood characteristics, and carcass quality of finishing pigs. A total of sixteen [($Landrace{\times}Yorkshire{\times}Duroc$)] pigs (90.26 kg in average initial body weight) were tested in individual cages for a 30 day period. Dietary treatments included 1) CON (basal diet), 2) S10 (basal diet for 20 days and 3% rye silage for 10 days) 3) S20 (basal diet for 10 days and 3% rye silage for 20 days) and 4) S30 (3% rye silage for 30 days). There were no significant differences in the ADG and gain/feed ratio among the treatments(p>0.05), however the ADFI was higher in pigs fed the CON diet than with pigs fed diets with rye silage (p<0.05). The DM digestibility was higher with the S20 diet than with the S30 diet (p<0.05). With regard to blood characteristics, pigs fed rye silage had a significantly reduced cortisol concentration compared to pigs fed the CON diet (p<0.05). The backfat thickness was higher with the CON diet than with the S20 or S30 diets (p<0.05). Regarding the fatty acid contents of the leans, the C18:0 and total SFA were significantly higher with the CON diet than with the other diets (p<0.05). However, the C18:1n9, total MUFA and UFA/SFA levels were significantly lower with the CON diet than the other diets (p<0.05). Regarding the fatty acid contents of fat, the levels of C18:1n9 and MUFA were similar with the S20 and S30 diets, however, these levels were higher than with the CON or S10 diets (p<0.05). In conclusion, feed intake and DM digestibility were affected by rye silage, and the cortisol concentration, backfat thickness and fatty acid composition of pork were positively affected by feeding pigs rye silage.