• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1647-1653
• /
• 2011

The cycle time in injection moulding greatly depends on the cooling time of the plastic part that is controlled by cooling channels. Cooling channels are required to facilitate the heat transfer rate from the die to the coolant without reducing the strength of the die. Employing layered manufacturing techniques (LMT), a die embedding conformal cooling channels can be fabricated directly while conventional cooling channels are usually made of straight drilled hole. Meanwhile, H13 tool steel is widely used as the die material because of its high thermal resistance and dimensional stability. However, H13 with a low thermal conductivity is not efficient for certain part geometries. In this context, the use of functionally graded materials (FGMs) between H13 and copper may circumvent a tradeoff between the strength and the heat transfer rate. This paper presents a method for modeling of conformal cooling channels made of FGMs.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.6
• /
• pp.43-52
• /
• 2022

Operational reliability of the single-use turbo engine for guided weapons must be guaranteed even after long-term storage. Rolling element bearings have a great influence on the operational reliability of the turbo engine, however changes in micro dimensions of bearings by an oxide layers on rolling elements and raceways may cause failures after long-term storage. In this study, changes in dimensions of bearings were measured and roughness of rolling elements was used for estimating the storage life. Storage life estimation was performed via two kinds of methods, Weibayes method and random sample generation method. The results of two methods were compared and their characteristics were analyzed. This study will contribute to establish an efficient maintenance schedule for the single-use turbo engine.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.135-142
• /
• 2013

This study aims to seek adequate and optimized method of applying high quality three-dimensional spatial data created via high-resolution digital aerial photograph image and aerial LiDAR data onto three-dimensional planning of environmentally friendly, ecological restoration of rivers in accordance with irrigation and flood control objectives of urban rivers. Through three-dimensional modeling of before and after the restoration, the research also offers basic information regarding restorations of rivers. Also the transition from the conventional two-dimensional planning into three-dimensional planning environment using smart spatial information acquire accuracy of river analysis, analyze possible civil complaints and suggest solutions to potential problems.

• Journal of Korea Foresty Energy
• /
• v.19 no.2
• /
• pp.79-85
• /
• 2000

Mortality patterns ad changes of vegetation in newly formed gaps were investigated to examine the succession process of Pinus densiflora forest located at Mt. Worak. The main findings from this study were as follows: ⑴ The forest was dominated by P. densiflora and Quercus variabilis in the oversotry, while Q. mongolica, Q. serrata and Fraxinus sieboldiana in the mid-story. ⑵ In all study areas, the standing dead type was the most common factor influencing gap-forming mortality. ⑶ DBH analysis showed that Pinus densiflora community was replaced by Quercus variabilis community first, and then by quercus mongolica and quercus serrata community. ⑷ Seedlings of P. densiflora were discovered only at dry sites of the gap.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.213-213
• /
• 2003

고온 및 고압의 가혹한 방사선 분위기에서 사용되는 핵연료 피복관은 중성자 조사 및 수소화합물의 생성 등으로 인하여 기계적 성질이 저하된다. 따라서 조사된 핵연료 피복관의 손상기준 확립과 안전성 해석을 위해서는 연성 및 강도 등 기계적 특성을 정확히 이해하여야 할 필요가 있다. 핵연료 피복관의 종 및 횡 방향 인장특성 평가를 위하여 개발된 기존의 다양한 시험법들을 비교하고, 핫셀시험에 적합한 인장시험법을 개발하였다. 피복관의 종방향 인장시편은 튜브시편 또는 게이지부 내에서 균일한 변형률 분포를 얻도록 설계된 도그본 튜브시편(그림 1)을 사용한다. 피복관의 횡방향 인장시험에 사용되는 링시편(그림 2)은 게이지부 내에서 균일한 단축 원환변형율 분포 또는 평면변형율 조건을 나타내도록 설계한다. 연소 또는 조사된 피복관으로부터 시편을 제작하기 위해서는 핫셀 내에서 작업 이 가능한 방전가공기(그림 3)를 사용한다. 피복관의 종방향 인장시험용그립(grip)은 핀-부하형이며, 횡방향 인장시험의 경우는 시험 동안 시편의 곡률이 일정하게 유지 되도록 그립의 형상 및 치수를 결정한다(그림 4). 피복관의 종 및 횡방향 강도와 변형 등 기계적 특성을 평가하기 위한 응력-변형율 곡선은 시험기의 복합 강성(K)을 고려하여 결정한다. 이상과 같이 검토된 인장시험법은 피복관의 안전성 해석(safety analysis)과 관련 규정(regulatory)에서 사용되는 피복관 손상기준(fuel damage criteria)의 개선에 필수적인 자료를 제공한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.859-862
• /
• 2015

Recent fashion business, is to promote and make a business strategy to realize a high added value to the first goal. Completion of the best men's clothing is only by making the pattern through a person's body size, making it as the best dressed. In this paper, we propose a system to automate production processes a significant impact on menswear production process, time and cost reduction in order to satisfy the needs of manufacturers and customers. Consequently, it is possible to provide optimal men's clothing by saving a time and expense of customers by, increases the customer's needs and men's clothing demand, it is possible to more easily perform to franchising custom men's clothing manufacturer.

• Journal of the Korean housing association
• /
• v.15 no.5
• /
• pp.69-76
• /
• 2004

비트루비우스(Vitruvius)에서 벤츄리(Venturi)에 이르기까지 많은 건축사가(建榮史家) 또는 건축가(建築家)들이 건축원리에 대한 각자의 규범적 태도를 글로써 밝혀왔다. 이러한 규범적 내용 중 비례이론은 서양건축에 있어 건축미(建築美) 비밀로 간주되어, 조화로운 건축물이 꼭 갖추어야 할 덕목중의 하나로 인식되었다. 현대건축에서 비교적 근대 비례시스템이라 불릴 수 있는 것으로 르 꼬르뷔지에의 모될로르와 반 데어 란의 플라스틱 넘버를 들 수 있다. 모될로르는 현재까지 아주 제한된 성공밖에 거두지 못했는데, 이는 피보나치 수열에 기초한 수치들이 커졌을 때 단위의 배수관계가 거의 형성되지 않는다는 사실에 기인한다. 반면에 플라스틱 넘버는 모될로르의 결점들을 보완할 수 있는 매력적인 수열을 가지고 있다. 이에 본 연구는 반 데어 란의 비례시스템 분석을 통하여 유도된 수열규칙이 건축디자인과 관련되어 직접적으로 적용되어 질 수 있는 CAAD시스템을 제안한다. 본 시스템의 초점은 반 데어 란의 비례이론이 어떻게 컴퓨터 언어로 변환 및 CAAD시스템에 적용되어, 실질적인 건축 실무행위에 있어 컴퓨터가 디자인 도우미로서 역할을 수행할 수 있겠는가하는 것이다. 연구의 결과, 사용자는 이러한 시스템을 사용함으로써 반 데어 란의 비례시스템을 자신의 디자인에 손쉽게 적용할 수 있으며, 이는 복잡한 치수관계로 구성된 비례시스템의 건축실무 활용으로 발전되어질 수 있을 것으로 사료된다.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.14-19
• /
• 2016

When an interior fire occurs in an apartment building, pollution of the entrance area by fire smoke before an air fan operates makes the evacuation of people very difficult aswhen the fire doors are opened. Numerical simulations using Fire Dynamics Simulator were conducted to determine the impact of a sprinkler on the fire flow velocity. The fire flow velocity was compared depending on the presence of sprinklers and the sprayed droplet size. The configuration and actual dimensions of an apartment building were used in the numerical simulations. The simulation results showed that fire flow velocity becomes smaller when a sprinkler is installed. In addition, the smaller droplet size results in a smaller fire flow velocity because smaller droplets can be evaporated more easily.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.3
• /
• pp.197-205
• /
• 2004

The relationships were studied between the range of hardening zone and the intensity of vacuum pressure in case of applying vacuum consolidation drainage method for soil improvement. A testing apparatus was made to measure the range of hardening zone varying the water content and the intensity of vacuum pressure for 3 different the highly compressible dredged clays(Gwangyang, Busan and Mokpo). In case of applying high vacuum pressure, the hardening zone is not spreaded as compared to low vacuum pressure because of the clogging of drainage and developed hardening zone near the drainage.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.6
• /
• pp.364-373
• /
• 2009

In this paper, we suggest the method for constructing parameterized human body model which has any required body sizes from 3D scan data. Because of well developed 3D scan technology, we can get more detailed human body model data which allow to generate precise human model. In this field, there are a lot of research is performed with 3D scan data. But previous researches have some limitations to make human body model. They need too much time to perform hole-filling process or calculate parameterization of model. Even more they missed out verification process. To solve these problems, we used several methods. We first choose proper 125 3D scan data from 5th Korean body size survey of Size Korea according to age, height and weight. We also did post process, feature point setting, RBF interpolation and align, to parameterize human model. Then principal component analysis is adapted to the result of post processed data to obtain dominant shape parameters. These steps allow to reduce process time without loss of accuracy. Finally, we compare these results and statistical data of Size Korea to verify our parameterized human model.