• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.499-506
• /
• 1999

The odontoma is relatively a common benign odontogenic tumor and caused by overgrowth of odontogenic tissues. The recent classification by World Health Organization divides odontoma into 2 groups such as compound odontoma and complex odontoma. Compound odontoma comprises dental tissues, resembling the morphology of a tooth and has predilection for the anterior maxilla. In contrast, complex odontoma has unorganized mass, not resembling the normal tooth and has predilection for the posterior mandible. The etiology of odontoma is unknown and almost asymptomatic. So, it usually is found in routine radiographic examination, and most common presenting symptom is impacted or unerupted permanent teeth and retained primary teeth. It can occurs almost anywhere in jaws. It is desirable that odontoma should be removed by surgical enucleation including follicle and surrounding soft tissues. Considering the age and behavioral cooperation of patient, the development of permanent dentition, the location of odontoma in jaw, the need for the concomitant operative dentistry, operation is performed in outpatient department with/without sedation or under general anesthesia with endotracheal intubation. In this case report, 2 patients with compound odontoma were treated by surgical enucleation including follicle and surrounding soft tissues. One patient, about 5 years old, was treated under general anesthesia and concomitant operative dentistry was performed. The other patient, about 11 years old, was treated under local anesthesia in outpatient department. In 2 cases, after 4 months, surgical defects were filled with new bone and normalization of eruption path of impacted permanent teeth was observed.

• Journal of dental hygiene science
• /
• v.10 no.4
• /
• pp.211-218
• /
• 2010

The purpose of this study was to examine preference for dental hygienists. The subjects in this study were 228 employees in general hospitals located in the region of Busan, on whom a survey was conducted in May and June, 2009. The findings of the study were as follows: As for top priority of dental hygienists' duties, providing assistance for dentist treatment ranked first(28.2%), followed by scaling(23.2%) and preventive duties(20.6%). Concerning a favorable image of a dental hygienist, a cheerful look was most preferred(61.4%), followed by a clean-cut look (32.9%), a refined look (3.5%) and an intellectual look (2.2%). Among the subjects, married respondents exhibited a greater liking for a cheerful look, and the gap between them and the unmarried subjects was statistically significant($x^2=8.11$, p<.05). In terms of uniform preference, a two-piece suit with pants was most favored(76.3%). Female respondents showed a greater preference for a two-piece suit with pants, and the gap between them and the male respondents was statistically significant($x^2=41.09$, p<.001). As for major qualifications, professional knowledge was most valued (49.1%), followed by integrity/responsibility(23.2%), friendliness(22.4%), and a great personality/being well-cultivated(5.3%). Employees who were in their 40s and up placed more importance on integrity and responsibility, and the gap between them and the others was statistically significant($x^2=20.62$, p<.01).

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.456-466
• /
• 2019

As digital dentistry technology is being developed, it is being used in various ways. This case covers how digital dentistry technology is being applied on the treatment of patients with loss of vertical dimension due to worn dentition and multiple loss of teeth. The loss of vertical dimension was carefully assessed and recovered, and implants were placed with surgical guides, designed considering the final restoration. The movement of the mandibular was measured with the electronic instrument for recording mandibular movement. Wax-up process was done with Naturgemäße Aufwachs-Technik (N.A.T.) and Natural functional reconstruction (N.F.R.). It was scanned, and the provisional restoration was fabricated using Computer-Aided-Design/Computer-Aided-Manufacturing (CAD/CAM) technology, and the adjustment process was done at the clinic to meet with the satisfaction both functionally and esthetically, and then, using double scanning and CAD/CAM technology, it was carried out as a final restoration. As a result, the patient obtained satisfying results, utilizing the benefits of digital dentistry technology and traditional methods.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.312-320
• /
• 2019

One of the fastest growing segments of implant dentistry is the utilization of computed tomography (CT) scan data and treatment planning software in conjunction with guided surgery for implant reconstruction cases. Computer assisted planning systems and associated surgical templates have established a predictable, esthetic, functional technique for placing and restoring implants. Especially, a philosophy of restoratively driven implant placement has been generally adopted. Recently, a variety of commercial dental fields have released their scanning and fabricating protocols and methods for restorations. This process is still being investigated and developed for the most precise and predictable outcome. This case report describes a female patient who wanted dental implants in fully edentulous areas. Restoratively driven implant placements were performed with surgical guide and the patient was fully satisfied with the clinical results, and at 5-year post restorative follow-up assessment, both implant and prosthesis were proved clinical success.

• Restorative Dentistry and Endodontics
• /
• v.31 no.2
• /
• pp.133-139
• /
• 2006

The purposes of this study were firstly to identify the microbial species on gutta-percha (GP) cones exposed at outpatient clinics using polymerase chain reaction, and secondly to evaluate the rapid sterilization effect of two chemical disinfectants at chair side. It also evaluated the alteration of surface texture of GP cones after 5-min soaking into two chemical disinfectants. A total of 100 GP cones from two endodontic departments were randomly selected for microbial detection using PCR assay with universal primer. After inoculation on the sterilized GP cones with the same microorganism identified by PCR assay, they were soaked in two chemical disinfectants: 5% NaOCl and 2% chlorhexidine for 1, 3, 5, and 10 minutes. The sterilization effect was evaluated by turbidity and subculture. The change of surface textures using a scanning electron microscope was also examined after 5 min-soaking in two chemical disinfectants. Results showed that four bacterial species were detected in 17 GP cones, and all the species belonged to the genus Staphylococcus. Two chemical disinfectants were effective in sterilization with just 1 minute soaking. On the SEM picture of NaOCl-soaked GP cone, a cluster of cuboidal crystals was seen on the cone surface. Present data demonstrate that two chemical disinfectants are useful for rapid sterilization of GP cone just before obturation at chair side, while CHX-soaked GP cone has cleaner surface without crystal precipitation than that of NaOCl-treated cone.

• The Journal of the Korea Contents Association
• /
• v.18 no.8
• /
• pp.607-615
• /
• 2018

The purpose of this study was to assess the level of awareness regarding the relationship between systemic diseases and oral health and the importance of education related to this association among dental patients, as well as to identify factors that affect the awareness of the relationship and the perceived need for education. This study was conducted from June 2016 to February 2017. Subjects of this study included outpatients (20-60 years old) from a dental clinic, and only patients who agreed to the survey were included. A total of 110 subjects were included, but the final analysis was based on 92 questionnaires, excluding questionnaires that were inaccurate. Survey questionnaires were completed by self-report and face-to-face interviews with a dental hygienist. The questionnaires covered basic information, awareness of the association between general and oral health, and experience with, and need for education related to, this association. Among the subjects, 48.9% were aware of the association between systemic diseases and oral health. A total of 39.1% of subjects had received education regarding the relationship between systemic diseases and oral health. Subjects who visited dental clinics regularly were 3.94 times (95% confidence intervals [CI]: 1.21-12.84) more likely to be aware of the association between oral health and disease compared with subjects who made only irregular visits to dental clinics. In addition, experience or education was significantly associated with awareness of the relationship between oral health and disease (odds ratio [OR]: 4.64, 95% CI: 1.54-13.93) and the need for education (OR: 3.98, 95% CI: 1.20-13.12). Thus, the dental professionals should provide education on the relationship between oral health and systemic disease in dental clinics to improve patients' awareness and oral health behaviors. These results can be used to strengthen education in the dental clinic.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.5 no.2
• /
• pp.100-103
• /
• 2009

Dental treatment of mentally challenged patients under general anesthesia is a series of challenging procedures not only for dental operators but also for dental anesthesiologists. Patients presenting with uncooperative behavior often resist the perioperative management for adesthestic administration. This case report suggests oral premedication as a conjuctive method for anestheitic induction. A 26-year-old male dental patient with autism was referred to dental treatment under general anesthesia. The patient refused to enter dental clinic office and was not able to receive preoperative assessment. In the day of operation, 15 mg of midazolam was given to the patient for oral premedication prior to anesthetic induction. Ater 20 minutes, the patient presented with drowziness and was transferred to the office. Anesthestic staff were able to achieve appropriate intravenous access and mask inhalation. The patient recieved 8 hrs long dental treatment and recovered in a noncomplicated way. Oral midazolam is commonly used to reduce anxiety for combative and irritated pateints. In this case, oral midazolam sedation was used as a preanesthetic management of a highly uncoopearive patient.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.391-395
• /
• 2018

Increasing demands for zirconia material in clinics, assessment of biocompatibility of zirconia is essential. In this article, a review of in vitro studies of zirconia compatibility was performed. Zirconia showed great biocompatibility at in vitro studies with various cell lines such as fibroblasts, osteoblasts, and lymphocytes. Many studies reported that zirconia caused no cytotoxicity or mutation. Zirconia also showed less bacterial adhesion. There were no adverse effects except for small reduced strength with in vitro study mimicking long-term exposure of body fluid. According to the study with ostoblast-like cells, zirconia could regulate genes of immunity, molecular transport, and cell cycle. Such gene regulating was considered as one of the reasons of zirconia biocompatibility. With biocompatibility of zirconia powders, in vitro studies had controversial conclusions. It seems that zirconia powders might have cytotoxicity.

• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.50-60
• /
• 2010

The purpose of this article was to evaluate the effects of a new upper molar distalization system, the Frog Appliance, on dentofacial structures in a Class II, division 1 patient. An 11-year-old girl was referred to our clinic for orthodontic treatment. She had a mild skeletal Class II malocclusion with Class II molar and canine relationship on both sides. The treatment plan included distalization of the upper first molars bilaterally followed by full fixed appliance therapy. For the upper molar distalization, a new system, the Frog Appliance, was constructed and applied. Lateral cephalometric radiographs were used to evaluate the treatment results. Distalization of the upper first molars was achieved in four months successfully, and Class I molar relationship was obtained. Total treatment time was 16 months. According to the results of the cephalometric evaluation, a nearly bodily distal molar movement with a slight anchorage loss was attained. In conclusion, the Frog Appliance was found to be a simple, ef ective, non-invasive, and compliance-free intraoral distalization appliance for achieving bilateral molar distalization.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.121-127
• /
• 2014

Comprehensive prosthetic treatment requires considerations from various points of view. The anterior guidance is important factor in prosthodontic treatment of anterior teeth. Lingual surface contour of anterior restoration is so critical that a small mistake of laboratory or clinical process can cause discomfort of patient and disharmony of entire dentition. There are no guidelines for lingual surface contour that fit all patients. Therefore the lingual surface of provisional restoration is most accurately described as a customized one. The dentist transfers the exact information of anterior guidance that has made through long term provisional restoration to the technician. This case introduce that the duplication technique of CAD/CAM system to reproduce the anterior guidance of provisional restoration. This method can improve satisfaction of both patient and dentist.