• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.33-45
• /
• 2004

The purpose of this experimental study was to determine appropriate magnitude of the Gable bends to produce maximum retraction of the anterior teeth. The Calorific Machine was used to illustrate the tooth movement in three dimension. The experimental teeth except the first premolar were embedded in the artificial alveolar bone part. In a series of experiments, the extraction space was closed using arch wires with bull loops into which the gable bends of $10^{\circ},\;20^{\circ},\;30^{\circ}$ degrees were incorporated. The experiments were repeated three times for each degree of the gable bend. Before and after the space closure, radiographs were taken in the sagittal and occlusal directions using occlusal films. Analysis of variance and Scheffe post hoc test were used to determine significant differences among the three groups. The following results were obtained. 1. As magnitudes of the gable bends increased, more bodily anterior tooth movement was seen and the distance of retraction also increased. 2. As magnitudes of the gable bends increase, the amount of posterior tooth protraction decreased while intrusive and buccal movement increased. 3. The arch was coordinated by distal-in rotation of the canine and mesial-in rotation of the second premolar adjacent to the extraction space.

• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.83-91
• /
• 2004

This study was performed to examine treatment efficiency and patient discomfort rate according to used handpiece speed in clean-up technique. Brackets were bonded to extracted human premolar(50 teeth). After debonding, 50 extracted human premolar were divided Into each two groups(low speed handpiece group with tungsten carbide bur and high speed handpiece group with ultra-fine diamond finishing bur) of 25 according to used handpiece speed in clean-up technique. In clean-up procedure, teeth vibration and pulp thermal changes were measured. After clean-up procedure, the enamel surfaces of randomly selected 10 teeth from each two groups were taken by SEM and evaluated. The findings of this study were as follows ; 1. During resin removal, tooth vibrations of various amplitude in low speed handpiece group were more than those of high speed handpiece. 2. The pulpal thermal changes of high speed handpiece group were significantly higher than those of low speed handpiece group, also the resin removal time in high speed handpiece group was almost as twice as in low speed handpiece group. 3. The figures of SEM to enamel surfaces after resin removal showed that notches and resin remnants in high speed handpiece group were more than those in low speed handpiece group.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.45-54
• /
• 2006

Recent beauty trends have caused an increase in the number of bialveolar protrusion patients seeking treatment of lip protrusion. But studies of these patients are not common. Studies using their dental models are especially rare. Dental models have been measured manually or through a computer by digitizing two dimensional images of models. Nowadays, we are able to study dental models more easily and accurately by utilizing the three-dimensional (3-D) laser scanner in dentistry. An investigation was carried out to evaluate the characteristics of the dental arch in a bialveolar protrusion group in comparison with a normal group using 3-D digital models. The normal group was composed of 20 subjects who were selected from students of the School of Dentistry, Kyungpook National University. The bialveolar protrusion group was composed of 20 subjects who visited for treatment at the Department of Orthodontics, Kyungpook National University Hospital. Tooth size, arch width and arch length were measured digitally, and arch shape and the shape of the palate were drawn. Based on the results of this study, the differences of the arch characteristics in the bialveolar protrusion group were that the size of the teeth was larger, mandibular canine width and 1st premolar width were wider, and arch length was longer than in the normal group. And there were differences in the arch shape and the shape of palate between the bialveolar protrusion and normal groups.

• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.237-248
• /
• 2001

Biomechanical reactions of tooth movement are the combination of bone formation and resorption, in which many paracrine factors are involved. The sex hormone is one of the paracrine factors and the sex hormonal level of an adult female vanes according to the body condition, e.g. mensturation, pregnancy, postmenopause, etc. Although the exact mechanism is not clarified yet, estrogen and progesterone are known to regulate the function of osteoblast. Again osteoblast is reported to affect the function of osteoclast. The purpose of this study is to determine the influence of the female sex hormone, estrogen and progesterone, on the cell proliferation and activity of HOS and ROS17/2.8 cell line. The observed results were as follows. 1. Estrogen inhibited HOS cell proliferation and promoted ROS17/2.8 cell proliferation. 2. Estrogen increased the activity of alkaline phosphatase of HOS cell and reduced the activity of alkaline phosphatase of ROS17/2.8 cell. 3. Progesterone inhibited the proliferation of HOS and ROS17/2.8 cell, but had no influence on the activity of alkaline phosphatase. 4. Estrogen and progeterone did not have any particular effects on the activity of super oxide, nitric oxide and gelatinase of HOS and ROS17/2.8 cell.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.711-721
• /
• 1997

The purpose of this study was to investigate the stress distribution and intensity derived from the transpalatal lingual arch in the investing bone composed of photoelastic material(PL-3). The transpalatal lingual arch wire was deflected in the horizontal and vertical direction to give the various conditions. The two-dimensional photoelastic stress analysis was performed, and the stress distrebution was recored by photography The results were as follows: 1. In bilateral expansion, as horizontal deflection was singly applied, the stress was more concentrated on the root apex in square free end than round. In square free end, as vertical deflection was increased gradually, the black line meaning center of rotation moved inferiorly together with the increment of whole fringes. 2. In application of vertical deflection on anchorage side for unilateral expansion, the stress distribution that expansive force leaned to expansion side was observed. As vortical deflection increased, the extruding stress was observed on molar of expansion side. And as horizontal deflection increased, the tipping stress on the molar of anchorage side was observed. 3. In unilateral rotation with the asymmetric toe-in, the fringe appeared on the distal aspect of root apex.

• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.219-227
• /
• 2004

The purpose of this study was to evaluate the spatial changes of mesial-in rotated maxillary molar and opposite anchor tooth during derotation by the precision transpalatal arch (TPA) with the use of a new typodont simulation system, the Calorific machine system, which was designed to observe the whole process of tooth movement. The maxillary right first molar was used for the anchor tooth and the maxillary left first molar was used for the mesial-in rotated tooth, and the angle of rotation was increased to 20,40, and 60. A passive precision TPA was fabricated and then activated by bending the left arm to 20, 40, and 60. Each experiment was repeated five times under the same conditions and analyzed by ANOVA and Tucky's Studentized Range (HSD) test. In the occlusal plane, when the bending angle of precision TPA was increased, the mesiobuccal cusp of the rotated molar moved more buccally (p<0.001) and less distally (p<0.001) while the distolingual cusp moved in the mesiopalatal direction. In the sagittal plane, the palatal roots of the derotated molar moved mesially (p<0.001). In the traverse plane, the derotated molar showed slight extrusion (p<0.001). The upper right first molar, which was used as an anchor tooth, showed clinically insignificant movement across all three planes.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.259-272
• /
• 1997

This study was performed to locate the anteroposterior position of the center of resistance of upper anterior teeth when intrusive forces are acted on them by applying segmented arch mechanics. Three-dimensional finite element model of upper six anterior teeth, periodontal ligament and alveolar bone was constructed The locations of the center of resistance were compared according to the three variables, which are number of teeth contained in anterior segment, axial inclination of anterior teeth, and degree of alveolar bone loss. The following conclusions were drawn from this study; 1. When the axial inclination and alveolar bone height were normal, the locations of center of resistance of anterior segment according to the number of teeth contained were as follows; 1). In 2 teeth segment, the center of resistance was located in the distal area of lateral incisor bracket 2) In 4 teeth segment, the center of resistance was located in the distal 2/3 of the distance between the brackets of lateral incisor and canine. 3) In 6 teeth segment, the center of resistance was located in 3mm distal of canine bracket, which is interproxirnal area. between canine and 1st premolar. 4) As the number of teeth contained in anterior segment increased, the center of resistance shifted to the distal side. 2. As the labial inclination of incisors increased, the center of resistance shifted to the distal side. 3. As the alveolar bone loss increased, the center of resistance shifted to the distal side.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.373-387
• /
• 1996

The purpose of this study was to evaluate the growth pattern of nasopharyx and adenoid and to obtain useful measurements for evaluating the fuction of the nasal breathing. The biennial serial cephalometric radiographs of 33 samples(19 male, 14 female) with normal occlusion from 8.5 years to 18.5 years of age were used in this study. The distances, areas and ratios on nasopharynx and adenoid were measured and analyzed in each age and sex. The results of this study might be summarized as follows ; 1. The mean value and standard deviation of each measurement was obtained in each age and sex. 2. The nasopharyngeal height and the nasopharyngeal depth increased significantly by 14.5 years of age in male and 12.5 years of age in female(p<0,05), 3. The relative nasal airway area showed the minimal value at 8.5 years of age and showed significant increase from 10.5 years to 12.5 years of age in male and from 12.5 years to 14,5 years of age in female(p<0.05). 4. In the correlation analysis between the measurements on the nasal airway and the measurement of relative nasal airway area, the measurements of Ad2-PNS, Ad2-PNS/Ho'-PNS and Upper pharynx appeared singnificant correlation with the measurement of relative nasal airway area(p<0.01).

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.181-196
• /
• 1997

The purpose of this study was to describe growth changes of soft tissue profile in koreans with normal occlusion and to get differences between male and female. The biennial serial cephalometric radiographs of 26 samples (15 males, 11 females) with normal occlusion from 8.5 years to 18.5 years of age were used in this study. The following results were obtained : 1. Both sexes had lower facial parts more protruded at 18.5 years of age than 8.5 years of age : in total facial convexity angle, male showed a decrease(P<0.01) and female showed no significant difference(P>0.05). 2. In the growth changes of soft tissue thickness, male outgrew female in the areas of nose and upper and lower lips, and female outgrew male in the pogonion area 3. In the growth changes of upper facial height and upper part of lower facial height, male's was higher than female's growth (P<0.05). 4. The ratio of the upper facial height over the lower facial height showed a decrease at 18.5 years of age than 8.5 years of age(P<0.01). The ratio of upper vs lower part of lower facial height and that of upper lip height vs lower lip height showed no significant difference(P>0.05). 5. Male showed a sustained change into older age compared with female in soft tissue profiles.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.423-439
• /
• 1996

The purpose of this study was to evaluate the diagnostic value of $SONOPAK^*$ in internal derangement of TMJ by comparing the spectral analysis data of TMJ sounds recorded by SONOPAK with the results of MRI. From the patients who came to Department of Orthodontics, Seoul National University Dental Hospital for treatment of malocclusion, eighteen adult patients (five males and thirteen females) with TMD symptoms were selected. After joint sounds were checked by a pediatric stethoscope, they were recorded and analyzed by the SONOPAK. The spectral analysis of the SONOPAK provided SONOPAK INTERPRETATION data about the stage of internal derangement, which were compared with the results of MRI. Among the patients whose disc positions were diagnosed as 'normar by MRI, there were no false positive diagnosis by the SONOPAK INTERPRETATION, But in the cases of anterior disc displacements (reducible and/or nonreducible), most of SONOPAK INTERPRETATION data did not coincide with MRI results. In conclusion, it is not adequate to try to differentiate reducible and non-reducible anterior disc displacements on the basis of joint sounds. And it is recommended not to determine the stage of internal derangement according to the nature of sounds. We suggest that the diagnostic value of the SONOPAK will be enhanced when clinicians combine some other informations such as clinical signs/symptoms and other supplementary diagnostic tools), and that more data be incoporated into the SONOPAK INTERPRETATION software.