• Journal of the Korean Solar Energy Society
• /
• v.33 no.6
• /
• pp.32-38
• /
• 2013

In an efforts to encourage renewable energy deployment, the government has initiated so called 1 million green homes program but the accumulated installation capacity of small wind turbine has been about 70kW. It can be explained in several ways such that current subsidy program does not meet public expectations, economic feasibility of wind energy is in doubt or acoustic emission is significant etc. The author investigated annual energy production of Skystream 3.7 wind turbine using measured power curve and wind resource data. The measured power curve of the small wind turbine was obtained through power performance tests at Wol-Ryoung test site. AEP(Annual Energy Production) and CF(Capacity Factor) were evaluated at selected locations with the measured power curve.

• Electric Engineers Magazine
• /
• s.334
• /
• pp.30-35
• /
• 2010

본 고에서는 현장에 설치된 태양광발전시스템의 출력 측정 방법을 제시 하였다. 태양광발전시스템은 햇빛이라는 자연조건에 따라서 출력이 수시로 변동하기 때문에 태양전지 제조자가 제시하는 규격은 제작시에 태양전지를 표준 시험조건(즉, STC, Air Mass 1.5, 일사량 1000[$W/m^2$], 온도 $25^{\circ}C$기준)에서 시험한 성능 규격을 제시하고 있다. 그러나 적용현장에 설치된 태양전지는 인위적으로 표준 시험조건을 만들어 줄 수 없기 때문에 출력을 측정하면 제조자가 제시한 성능 규격이 제대로 나오는지 여부가 관심사다. 그렇기 때문에 설치현장에서 자연 조건에서 측정된 출력에다 태양전지 제작사에서 제시한 온도 및 일사량 특성곡선에서 추출된 보정계수를 적용하여 보정 출력을 산정해서 보정 출력을 토대로 제조사에서 제시한 규격에 부합하는 지 여부를 판단할 수 있는 방법을 제안하였다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.383-384
• /
• 2010

본 논문에서는 연료전지에 연결되는 부하가 어떠한 주파수특성을 갖는 것이 바람직한지 알아보기 위해 출력 리플전류 주파수에 따른 연료전지 수명의 영향을 알아보았다. 전자부하를 통해 일정한 크기의 리플전류를 주파수대역을 바꿔가며 단위 셀에 인가하여 장시간 운전한 뒤 연료전지의 전압-전류곡선을 측정하였다. 측정된 전압-전류곡선을 통해 연료전지의 성능을 비교함으로써 어떠한 출력 리플전류 주파수가 연료전지 수명에 더 큰 영향을 주는지 확인하였다.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.149-157
• /
• 2005

The power performance monitoring system for a small class of wind turbine is established. The wind turbine power performance characteristics are determined by measured power curve and the estimated annual energy production (AEP). The measured power curve is determined by collecting simultaneous measurements of wind speed and power output at the test site under varying wind conditions. In order to determine the power performance characteristics of the wind turbine accurately, the data are of sufficient quantity and quality shall be corrected according to defined criteria. In this study, the 6kW wind turbine made by Germany Inventus GmbH is examined.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.83-83
• /
• 2005

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.907-915
• /
• 2018

This paper proposes a method to improve the performance of low cost infrared distance sensor. Infrared distance sensor measures the intensity of reflected light and converts it into distance. The proposed method improves the sensing distance of the sensor and makes it operate robustly in various lighting environments. This is achieved by extracting the characteristic curves of the sensor and applying the HDR (High Dynamic Range) technique. The output value of the sensor was obtained by varying the intensity of the infrared input and the exposure time, and the characteristic curve of the sensor was extracted from it.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.46-46
• /
• 2004

디지털 측정장치의 발달에 따라 센서에서 출력되는 아날로그 신호를 디지털 신호로 변환하고, 이를 바탕으로 측정결과를 제시하는 경우가 많다. 그러나 아날로그 신호의 디지털화 과정에서는 정보의 유실이 생길 수밖에 없고, 또한 측정 헤드의 dimension 과 sampling interval 등과 같은 측정조건은 측정결과의 신뢰성에 많은 문제를 야기 시킨다. 본 연구에서는 새로운 측정방법을 바탕으로 시장-분산곡선과 Correlogram 법을 이용하여 그 특성을 해석하고, 데이터 샘플링 시 측정조건과 시료내의 변동성이 측정결과인 평균 굵기 및 굵기의 총분산에 미치는 영향을 찾아 보았다.(중략)

• Journal of the Korea Computer Industry Society
• /
• v.8 no.3
• /
• pp.173-180
• /
• 2007

This paper describes the point-detector arrays system to processes the fields of signal and noise of the turbulent atmosphere. By using aboves, the maxmum output of direct-detection shows a little differences between experimental datas and theoretical datas. As a whole the experimental datas are agreed with the joint Gaussian theoretical curves and K-distribution curves.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.681-686
• /
• 2017

Degradation is commonly observed in field-aged PV modules due to corrosion of the photovoltaic ribbon. The reduced performance is caused by a loss of fill factor due to the high series resistance in the PV ribbon. This study aimed to mitigate the degradation by corrosion using five sacrificial anodes - Al, Zn and their alloys - to identify the most effective material to mitigate the corrosion of the PV ribbon. The corrosion behavior of the five sacrificial anode materials were examined by open circuit potential measurements, potentiodynamic polarization tests, and galvanic current density and potential measurements using a zero resistance ammeter. Immersion tests for 120 hours were also conducted using materials and damp heat test tests were performed for 1500 hours using 4 cell mini modules. The Al-3Mg and Al-3Zn-1Mg sacrificial anodes had a low corrosion rate and reduced drop in power, making then suitable for long-term use.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.6
• /
• pp.355-364
• /
• 2010

Considering biological safety, it is very important to measure acoustic power from ultrasonic array probe for diagnostic ultrasound imaging applications. In this paper, to measure acoustic power from each element on array probe for ultrasonic diagnostic equipment, we reconstruct and automate the acoustic power measurement system. The acoustic power from linear, phased and curved array were measured and analyzed. As a result of measurement, the effects caused by directivity of sound beam from curved array were founded. To remove these effects, we developed and applied the correction model. The proposed system is useful to evaluate characteristics of the acoustical output power of array probe.