DOI QR코드

DOI QR Code

방사힘 측정법을 이용한 초음파 진단장치용 배열 탐침자의 음향파워 측정시스템

Acoustic Power Measurement System of Array Probes for Ultrasonic Diagnostic Equipment Using Radiation Force Balance Methods

  • 윤용현 (연세대학교 전기전자공학과) ;
  • 조문재 (한국표준과학연구원 성과확산부) ;
  • 김용태 (한국표준과학연구원 기반표준부) ;
  • 이명호 (연세대학교 전기전자공학과)
  • 투고 : 2010.02.16
  • 심사 : 2010.06.30
  • 발행 : 2010.08.31

초록

초음파 진단장치의 음향출력 특성은 전기음향 변환 장치인 배열 탐침자의 성능에 크게 영향을 받으며, 생물학적안전 측면에서 매우 중요하다. 본 논문에서는 초음파 진단장치용 배열 탐침자로부터 방사되는 음향파워를 소자별로 측정할 수 있는 자동화 시스템을 구성하였으며, 곡선형 탐침자의 경우 각 소자의 지향성이 측정에 미치는 영향을 확인하고 이를 보정하는 기법을 개발하였다. 선형, 위상형, 곡선형 배열 탐침자를 대상으로 음향파워 측정결과, 본 논문에서 제시하는 측정기법은 배열 탐침자의 음향파워 특성을 평가하는데 적합함을 확인하였다.

Considering biological safety, it is very important to measure acoustic power from ultrasonic array probe for diagnostic ultrasound imaging applications. In this paper, to measure acoustic power from each element on array probe for ultrasonic diagnostic equipment, we reconstruct and automate the acoustic power measurement system. The acoustic power from linear, phased and curved array were measured and analyzed. As a result of measurement, the effects caused by directivity of sound beam from curved array were founded. To remove these effects, we developed and applied the correction model. The proposed system is useful to evaluate characteristics of the acoustical output power of array probe.

키워드

참고문헌

  1. AIUM, Official Statements and Reports, Laurel, MD, American Institute of Ultrasound in Medicine, 2000.
  2. U.S. Food and Drug Administration (FDA). Information for rnanufaclurers seeking rnarketing clearance of diagnostic ultrasound systems and transducers. Rockville, MD: FDA; Sept 30, 1997.
  3. IEC Standard 1161 (61161), Ultrasonic power measurement in liquids in the frequency range 0.5 MHz to 25 MHz, Geneva, International Electrotechnical Commission, 1992, and Amendment 1, 1998.
  4. IEC Standard 1101 (61101), The absolute calibration, of hydrophones using the planar scanning technique in the frequency range 0.5 MHz to 15 MHz, Geneva, International Electrotechnical Commission, 1991.
  5. M. C. Ziskin and P. A. Lewin, Ultrasonic Exposimetry, CRC Press, Boca Raton, 1993.
  6. Fay B., Rinker M., "Determination of the Absolute Value of Ultrasonic Power by means of Thermoacoustic Sensors", Acuslica/Acla Acustica, vol. 82, no. 2, pp. 274-279, 1996.
  7. K. Beissner, "Acoustic radiation pressure in the near filed", Journal of Sound and νibration, vol. 93, no.4, pp. 537-548, 1984. https://doi.org/10.1016/0022-460X(84)90422-X
  8. J. Henderson, K. Willson, J. R. Jago, and T. A. Whittingham, "A Survey of the Acoustic output, of Diagnostic Ultrasound Equipment in current clinical use", Ultrasound in Med. & Biol., vol. 21, no. 5, pp. 699-705, 1995. https://doi.org/10.1016/0301-5629(94)00158-A
  9. James A. Rooney, "Determination of acoustic power outputs in the microwatt-milliwatt range", Ultrasound in Med. & Biol., vol. 1, no. 1, pp. 13-16, 1973. https://doi.org/10.1016/0301-5629(73)90004-5
  10. K. Beissner, "Primary measurement of ultrasonic power and dissemination of ultrasonic power relerence values by means of standard transducers", Metrologia, vol. 36, pp. 313-320, 1999. https://doi.org/10.1088/0026-1394/36/4/10
  11. S. E. Fick, "Ultrasound power measurement by pulsed radiation pressure", Metrologia, vol. 36, pp. 351-356, 1999. https://doi.org/10.1088/0026-1394/36/4/15
  12. Frederick W. Kremkau, Diagnostic Ultrasound: principles and instruments, W, B. Saunders Company, Philadelphia, 2002.
  13. 조문재, 황철호, 서상준, 은희준, "방사힘 측정에 의한 초음파 변환기의 방사콘더턴스 결정", 응용물리. 7권, 5호 439-445쪽, 1994.
  14. 조문재, 김용태, 윤용현, 정성수, "초음파 파워 측정 시스템 구성 및 성능평가", 한국음향학회지, 24권 8호, 431-440, 2005.
  15. L. E. Kinsler, A. R. Frey, A. B. Coppens and J. V. Sanders, Fundamentals of acoustics 4th edition, John Wiley & Sons, Inc., New York, 2000.
  16. Pinkerton, J.M.M., "The absorption of ultrasonic waves in liquid and its relation to molecular constitution", Proc. Phys. Soc. B62, pp. 129-141, 1949.
  17. B. Zegiri and C.J. Bickley, "A new anechoic material lor medical ultrasonic application", Ultrasound in Med. Bio., vol. 26, no. 3, pp. 481-485, 2000.
  18. ISO, International Organization for Standardization, Guide to the Expression of Uncertainty in Measurenment, GUM, Geneva, Switzerland. 1995.