• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1237-1242
• /
• 2009

This study was conducted to isolate strain for the preparation of fermented antler (Cervus cornu parvum) and evaluate its physiological activities. The growth degrees of twenty-one samples from Bacillus sp., Lactobacillius sp. and mushroom strain on antler extract agar were evaluated in this study, and Bacillus subtilis KH-15, SCB-3, Cordyceps militaris, Phellinus linteus, Inonotus obliquus 26136, and Inonotus obliquus 26147 were selected. The fermented antler extract by C. militaris had relatively higher contents of total sugar (1619.3 ${\mu}g$/mL), uronic acid (302.0 ${\mu}g$/mL), sulfated-glycosaminoglycan (S-GAGs) (119.9 ${\mu}g$/mL) and sialic acid (21.6 ${\mu}g$/mL) than any other extracts. The anti-complementary activities of all fermented antler extracts were higher than non-fermented antler extract, and among these samples, fermented antler extract by C. militaris showed the highest anti-complementary activity (inhibition of 50% total complement hemolysis, $ITCH_{50}$; 50.1% at 1,000 ${\mu}g$/mL). The ability of fermented antler extract by B. subtilis KH-15 to scavenge 2,2-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical ($IC_{50}$; 4.97 mg/mL) was significantly the highest (p<0.05), whereas the extract from I. obliquus exerted significantly (p<0.05) high 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity ($IC_{50}$; 16.98 mg/mL) among all samples. The results of this study suggest that physiological effects including immuno-modulating and antioxidant activities of the antler may be increased through fermentation process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.2
• /
• pp.220-228
• /
• 2017

Effects of extraction methods on reducing concentrations of pro-oxidants (total iron and protein) of salmon was determined. For development of the extraction process, the effectiveness of several extraction methods was determined and compared, including heat treatment (60, 80, and $100^{\circ}C$), ion exchange and carboxymethyl (CM)-cellulose column chromatography, and ultrafiltration (UF). Protein, total iron, and anserine contents of salmon extracts were 23.64 mg/mL, $16.20{\mu}g/mL$, and 5.47 mg/mL in non-heated extracts, 7.40 mg/mL, $2.32{\mu}g/mL$, and 5.20 mg/mL in heated extracts at $60^{\circ}C$, 7.64 mg/mL, $1.20{\mu}g/mL$, and 5.21 mg/mL at $80^{\circ}C$, and 7.04 mg/mL, $0.68{\mu}g/mL$, and 4.04 mg/mL at $100^{\circ}C$, respectively. Heating and UF decreased contents of protein and total iron, whereas only UF slightly decreased anserine content. Application of the primary ion exchange method increased the content of anserine up to 16%. Protein and total iron contents by the primary ion exchange method decreased by 70 and 98%, respectively. Secondary ion exchange (CM-cellulose) treatment after primary ion exchange and UF resulted in lower anserine content than the primary ion exchange method. However, the content of impurities (protein, total iron) was lower than in all other salmon extracts. Therefore, primary ion exchange, UF, and secondary ion exchange method were the best extraction processes in this study.

• Progress in Medical Physics
• /
• v.19 no.2
• /
• pp.89-94
• /
• 2008

TomoTherapy has a merit to treat cancer with Intensity modulated radiation and combines precise 3-D imaging from computerized tomography (CT scanning) with highly targeted radiation beams and rotating beamlets. In this paper, we comparing the dose distribution between TomoTherapy and linear accelerator based intensity modulated radiotherapy (IMRT) for 10 Head & Neck patients using TomoTherapy which is newly installed and operated at National Cancer Center since Sept. 2006. Furthermore, we estimate how the homogeneity and Normal Tissue Complication Probability (NTCP) are changed by motion of target. Inverse planning was carried out using CadPlan planning system (CadPlan R.6.4.7, Varian Medical System Inc. 3100 Hansen Way, Palo Alto, CA 94304-1129, USA). For each patient, an inverse IMRT plan was also made using TomoTherapy Hi-Art System (Hi-Art2_2_4 2.2.4.15, TomoTherapy Incorporated, 1240 Deming Way, Madson, WI 53717-1954, USA) and using the same targets and optimization goals. All TomoTherapy plans compared favorably with the IMRT plans regarding sparing of the organs at risk and keeping an equivalent target dose homogeneity. Our results suggest that TomoTherapy is able to reduce the normal tissue complication probability (NTCP) further, keeping a similar target dose homogeneity.

• Progress in Medical Physics
• /
• v.24 no.2
• /
• pp.85-91
• /
• 2013

At present, megavoltage computed tomography (MVCT) is the only method used to correct the position of tomotherapy patients. MVCT produces extra radiation, in addition to the radiation used for treatment, and repositioning also takes up much of the total treatment time. To address these issues, we suggest the use of a video image-guided setup (VIGS) system for correcting the position of tomotherapy patients. We developed an in-house program to correct the exact position of patients using two orthogonal images obtained from two video cameras installed at $90^{\circ}$ and fastened inside the tomotherapy gantry. The system is programmed to make automatic registration possible with the use of edge detection of the user-defined region of interest (ROI). A head-and-neck patient is then simulated using a humanoid phantom. After taking the computed tomography (CT) image, tomotherapy planning is performed. To mimic a clinical treatment course, we used an immobilization device to position the phantom on the tomotherapy couch and, using MVCT, corrected its position to match the one captured when the treatment was planned. Video images of the corrected position were used as reference images for the VIGS system. First, the position was repeatedly corrected 10 times using MVCT, and based on the saved reference video image, the patient position was then corrected 10 times using the VIGS method. Thereafter, the results of the two correction methods were compared. The results demonstrated that patient positioning using a video-imaging method ($41.7{\pm}11.2$ seconds) significantly reduces the overall time of the MVCT method ($420{\pm}6$ seconds) (p<0.05). However, there was no meaningful difference in accuracy between the two methods (x=0.11 mm, y=0.27 mm, z=0.58 mm, p>0.05). Because VIGS provides a more accurate result and reduces the required time, compared with the MVCT method, it is expected to manage the overall tomotherapy treatment process more efficiently.

• Journal of Life Science
• /
• v.22 no.5
• /
• pp.671-680
• /
• 2012

Three kinds of dietary composites-R+T, R+F, and R+TF-were combined in green tea (T), dietary fiber (F), and green tea dietary fiber mixture (TF) to red garlic extract (RG), respectively. The effects of their diets on anti-obesity were investigated $in$ $vitro$ and $in$ $vitro$ in obese rats induced high fat-cholesterol. In $in$ $vivo$ rats, the total phenolic content of the R+T and R+TF was 1.9~2.0 times higher, and their total cholesterol adsorption was 9.5~11.5 times higher than that of RG. $In$ $vivo$, male Sprague-Dawley rats were divided into 6 groups (Normal, HFC, HRG, HR+T, HR+F and HR+TF). Afterwards, the diets of the HRG, HR+T, HR+F, and HR+TF groups were supplemented with 1% of RG and its dietary composites (R+T, R+F, and R+TF) for 4 weeks, respectively. The final body weight of the HRG, HR+T, HR+F, and HR+TF groups decreased significantly compared to the group fed high fat-cholesterol (HFC), but the food efficiency ratio was not significantly different from the HFC group. The liver weight of the HFC group doubled compared to the normal group, whereas that of HR+T and HR+TF groups decreased significantly. The weight of visceral and epididymal fat decreased significantly in the groups fed the composites compared to the HFC group. The obesity index of HR+TF group decreased significantly only when compared to the HFC group. The serum lipid profile such as total lipids, cholesterol, triglyceride, LDL- and VLDL-cholesterol, as well as the atherogenic index and cardiac risk factors decreased drastically in all experimental groups compared to the HFC group, and the levels of HR+T, HR+F and HR+TF groups were a similar trend. GPT activity was not significantly different among the groups fed the composites, and it decreased significantly in the HRG group. The content of the lipid peroxide level decreased significantly in the HRG group and in the groups fed the composites, compared to the HFC group. Serum antioxidant activity was the highest in the HR+T group. We suggest that the hypolipidemic and anti-obesity effect of the RG composites, achieved by mixing green tea extract and/or dietary fiber, was due to their total phenolic content and total cholesterol adsorption effect.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.75-85
• /
• 2009

This work proposes a 13b 100MS/s 0.13um CMOS ADC for 3G communication systems such as two-carrier W-CDMA applications simultaneously requiring high resolution, low power, and small size at high speed. The proposed ADC employs a four-step pipeline architecture to optimize power consumption and chip area at the target resolution and sampling rate. Area-efficient high-speed high-resolution gate-bootstrapping circuits are implemented at the sampling switches of the input SHA to maintain signal linearity over the Nyquist rate even at a 1.0V supply operation. The cascode compensation technique on a low-impedance path implemented in the two-stage amplifiers of the SHA and MDAC simultaneously achieves the required operation speed and phase margin with more reduced power consumption than the Miller compensation technique. Low-glitch dynamic latches in sub-ranging flash ADCs reduce kickback-noise referred to the differential input stage of the comparator by isolating the input stage from output nodes to improve system accuracy. The proposed low-noise current and voltage references based on triple negative T.C. circuits are employed on chip with optional off-chip reference voltages. The prototype ADC in a 0.13um 1P8M CMOS technology demonstrates the measured DNL and INL within 0.70LSB and 1.79LSB, respectively. The ADC shows a maximum SNDR of 64.5dB and a maximum SFDR of 78.0dB at 100MS/s, respectively. The ABC with an active die area of $1.22mm^2$ consumes 42.0mW at 100MS/s and a 1.2V supply, corresponding to a FOM of 0.31pJ/conv-step.

• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.546-555
• /
• 2014

The final aim of this study is to develop a biofiltration system integrated with plant vegetation for improving indoor air quality effectively depending on indoor space and characteristics. However, to approach this final goal, several requirements such as constant pressure drops (PDs) and soil moisture contents (SMCs), which influence the capacity design for a proper ventilation rate of biofiltration system, should be satisfied. Thus, this fundamental experiment was carried out to adjust a proper wind speed and to ensure a stabilization of initial SMCs within biofilter for uniform distribution of SMCs and PDs, and for normal plant growth, especially avoiding root stress by wind. Therefore, we designed horizontal biofliter models and manufactured them, and then calculated the ventilation rate, air residence time, and air-liquid ration based on the biofilter depending on three levels of wind speed (1, 2, and $3cm{\cdot}s^{-1}$). The relative humidity (RH) and PD of the humidified air coming out through the soil within the biofilter, and SMC of the soil and plant growth parameters of lettuce and duffy fern grown within biofilter were measured depending on the three levels of wind speed. As a result of wind speed test, $3{\cdot}sec^{-1}$ was suitable to keep up a proper RH, SMC, and plant growth. Thus, the next experiment was set up to be two levels of initial SMCs (low and high initial SMC, 18.5 and 28.7%) within each biofilter operated and a non-biofiltered control (initial SMC, 29.7%) on the same wind speed ($3cm{\cdot}sec^{-1}$), and measured on the RH and PD of the air coming out through the soil within the biofilter, and SMC of the soil and plant growth parameters of Humata tyermani grown within biofilter. This result was similar to the first results on RHs, SMCs, and PDs keeping up with constant levels, and three SMCs did not show any significant difference on plant growth parameters. However, two biofiltered SMCs enhanced dry weights of the plants slightly than non-biofiltered SMC. Thus, the stability of this biofiler system keeping up major physical factors (SMC and PD) deserved to be adopted for designing an advanced integrated biofilter model in the near future.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.486-493
• /
• 2008

Safflower red colorants extracted by two solvents including the traditional ash solution and $K_{2}CO_{3}$ solution was used for dyeing cotton, ramie, viscose rayon, silk, wool, and nylon fabrics. The effects of extraction solvents on the reflectance, K/S value, and color properties of the dyed fabrics were investigated. Wash/dry cleaning and light colorfastness were evaluated. Reflectance curves of cotton, ramie, viscose rayon, and silk fabrics dyed with red colorants extracted by $K_{2}CO_{3}$ solution were similar, showing the maximum absorption at 520nm, to that of the dyed fabrics with red colorants extracted by ash solution. The reflectance curves of wool and nylon fabrics were different, showing the maximum absorption at 400nm. K/S values of dyed fabrics with red colorants extracted by $K_{2}CO_{3}$ solution were higher than that by ash solution with the exception of nylon. $L^{*},\;a^{*},\;b^{*}$, and $C^{*}$ of the dyed fabrics with red colorants extracted by $K_{2}CO_{3}$ solution were higher than that by ash solution except for $L^{*}$ of nylon and $b^{*}$ of viscose rayon. Color difference(${{\Delta}E}^*$) of the dyed fabrics between ash solution and $K_{2}CO_{3}$ solution increased in the order named as cotton, silk, ramie, viscose rayon, wool, and nylon. Regardless of extraction solvents, safflower red colorants produced RP color on cotton, ramie, and nylon, R color on viscose rayon and silk, and YR color on wool. Wash/dry cleaning fastness of the dyed fabrics was high above 3/4 rating but light fastness was very poor. It is considered that the use of $K_{2}CO_{3}$ solution instead of the traditional ash solution would be more effective in terms of color reproducibility and extraction process.

• Korean Journal of Food Science and Technology
• /
• v.45 no.6
• /
• pp.693-699
• /
• 2013

A simple, sensitive, and specific method for quantifying the nicotine content of synthetic favoring substances (SFS) was developed using high performance liquid chromatography (HPLC) with a photo-diode array detector (PDA). Nicotine was extracted from SFS samples by using an acid-base liquid-liquid extraction method with dichloromethane and distilled water. The nicotine content was quantified by HPLC/PDA (261.9 nm) with a $C_{18}$ column under a gradient of 10% acetonitrile with 20 mM ammonium formate (ammonia solution adjusted to pH 8.7) to 100% acetonitrile. The calibration curve, analyzed from concentration standards between 0.1 to 2 mg/L, presented linearity with a correlation coefficient ($r^2$)>0.9999. The limit of quantitation (LOQ) of nicotine in SFS was 0.4 mg/kg, and the average recoveries ranged from 76.4% to 96.3%. The repeatability of measurements, expressed as the coefficient of variation (CV%), ranged from 1.74 to 5.12%. This newly developed method for nicotine quantification in SFS can be considered an analytical method with an acceptable level of sensitivity and repeatability.

• Korean Journal of Food Science and Technology
• /
• v.52 no.4
• /
• pp.333-341
• /
• 2020

This study aimed at comparing the antioxidant activity of premature mandarin (PM) vinegars by varying harvest periods (July, August, and September) and raw material conditions (PM fruit, PMF; PM fruit with 10% dried Citri Unshius Pericarpium Immaturus (CUPI), PMF-D, and PM fruit with 10% roasted CUPI, PMF-R). We found that the PM harvested in July exhibited the highest phenol content. Meanwhile, the July and August harvests showed stronger DPPH radical scavenging and reducing power. The phenol content of PMF-R vinegar was 0.62±0.02 ㎍ GAE/mL, more than two times higher than that of PMF vinegar. The DPPH radical scavenging capacity and reducing power were the highest in the PMF-R vinegar, at 4.71±0.07 and 7.47±0.28 nL/mL, respectively. Therefore, it could be expected that PM vinegar prepared by adding roasted CUPI and harvested in July would exhibit high antioxidant activity and could be used as functional vinegar.