• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.4
• /
• pp.937-944
• /
• 1990

본 연구에서는 파이프내에 부분 오리피스판을 장착하여 이 장애벽 전후에서 발생하는 유동현상을 박리 전단층의 유동구조와 재부착 경계층을 중심으로 실험적으로 연구하였다. 측정방법으로 유동의 속도장변화를 구하기 위하여 NMR 위상 영상법을 사용하였고, 과망간산칼륨을 염료로 가시화 실험을 수행하여 그 결과를 비교 검토하였 다.

• Proceedings of the Korea Contents Association Conference
• /
• 2019.05a
• /
• pp.133-134
• /
• 2019

이 연구에서는 우울증이 만연하고 있는 국내 실정에서 경찰관의 우울증 수준을 파악하여 그 심각성의 정도를 실증적으로 확인하고자 한다. 그리고 인구사회학적 특성에 따른 경찰관의 우울증 수준을 분석하여 보기로 한다. 우울증 수준 측정은 한국어판 우울증 선별도구(PHQ-9: Patient Health Questionnaire 9)를 활용하였다.

• Journal of Korean Academy of Nursing
• /
• v.52 no.6
• /
• pp.173-186
• /
• 2022

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.807-810
• /
• 2003

금속 평행판 전극 사이에 주입된 액체 유전체의 움직임에 의해서 발생되는 차동 전기용량 변화를 이용하여 기울기 측정센서를 개발하였다. 기울기 $0^{\circ}{\sim}{\pm}90^{\circ}$의 범위에서 직선에 대한 상관계수가 0.999 99로 분석이 되어 우수한 선형성을 보였다. 센서의 전극구조를 완벽한 3-전극형 전기용량기로 설계하였기 때문에 외부로부터의 전자기 잡음 및 전기장의 영향에 관계없이 기울기를 정밀하게 측정할 수 있었다. 또한 안정된 디지털 출력을 이용하여 기울기의 정밀측정 뿐만 아니라 장치나 구조물 등의 기울기를 원격조정 또는 monitoring에도 적용이 가능하다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.124-129
• /
• 2001

점 용접부는 응력상태가 복잡하고, 피로균열은 판 두께, 너겟 직경, 용접 타점수, 부하 방식 등의 역학적인 인자와 재질, 화학성분, 표면 상태 등의 재료적인 인자, 그리고 용접전류, 가압력, 통전 시간등의 용접적인 인자의 영향을 동시에 받으며 3차원적으로 성장하므로 균열 성장 모드는 항상 혼합보드이고 균열이 박판 내면에서 발생. 성장하므로 검출이 곤란하여 균열 성장의 해석 및 예측이 어렵다/sup 1)/. 따라서 비접촉, 실시간, Whole-field, 레이저 파장 단위까지 측정이 가능하여 기존의 방법들의 문제점을 극복할 수 있고, 반도체와 같은 소형의 제품뿐만 아니라 기존에 측정하지 못했던 초고온, 대형 구조물의 변형도 정확하게 측정을 할 수 있는 ESPI법을 이용하여 일반가전 제품, 자동차 건축용에 많이 사용되고 있는 아연도금강판(SGCC)을 선택하여 단일 용접조건으로 점용접의 피치를 변화시켜 시험편을 제작하고 면외변위를 다각도로 측정하여 그 가능성을 검증하고자 한다.(중략)

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.9 no.2
• /
• pp.148-153
• /
• 1998

Objectives：This study investigated the severity and frequency of depression in mothers with autistic children and the correlation between K-BDI score of mothers with autism and severity of autistic symptoms of their children. Methods：The subjects for this study consisted of 45 autistic children and their mothers. The severity of autistic symptoms of children were evaluated by K-CARS and severity of depressive symptoms of mothers with autistic children evaluated by the K-BDI. Results：1) Total K-BDI scores of mothers with autistic children were $17.3{\pm}10.9$ and this score was belonged to subclinical depression on the K-BDI STEN score. There were significant differences of total KBDI score between in mothers with autistic children and in those of normal control. The 26.7% of 45 mothers with autistic children were depression. 2) There was no correlation between total K-BDI score and each factor of mothers with autistic children and K-CARS score of the their children. Conclusion：There were many depression in mothers with autistic children than in those of normal control. This result suggested that the education and the supportive psychotherapy for mothers with autistic children is as important as the treatment for autism.

• Journal of the Korean Society of Radiology
• /
• v.11 no.6
• /
• pp.459-466
• /
• 2017

The purpose of this study was to evaluate the difference of dose and image quality according to the material of the additional filter plate by selecting copper and nickel. First, the absorbed dose was measured using a Rando phantom setting the additional filter plates of copper and nickel None, 0.1 mm, 0.2 mm, and 0.3 mm under 120 kVp, and 6.3 mAs. Second, We acquired image according to filter thickness of copper and nickel. by changing the tube voltage of 90 kVp, 100 kVp, 110 kVp, 120 kVp and exposure indexes of 400, 800 and 1600. Third, we obtained the SNR and CNR values using the Image J program and evaluated quantitatively and then evaluated image quality. As a result, Absorbed dose measurements showed that nickel was higher than copper, and the absorbed dose decreased as the thickness increased(p<0.05). Furthermore, Quantitative analysis of images showed no significant difference between the two images according to change the voltage and the exposure index(p>0.05). In conclusion, this study confirms that the nickel addition plate can maintain the current image quality while reducing the exposure dose compared to copper.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.55-62
• /
• 2005

This study was conducted to evaluate the application of a bio-composite made by the addition recycled fiber board flour as filler. Recycled fiber board (high density fiber board, HDF) flour was added to polyolefin polymer low density polyethylene (LDPE) and polypropylene (PP) for the preparation of bio-composite materials. The mechanical properties and processability of the recycled HDF flour filled LDPE and recycled HDF flour filled PP bio-composites were then measured and compared to those of wood flour (WF) and rice-husk flour (RHF) filled LDPE and PP bio-composites, respectively. The tensile and impact strengths of the recycled HDF flour filled LDPE and PP bio-composites had similar mechanical properties to those of the WF and RHF filled LDPE and PP bio-composites. To measure the processability, torques of the bio-composites were also measured. The torques of the HDF flour filled LDPE and PP bio-composites were lower than those of the WF and RHF filled polyolefin (PP and LDPE) bio-composites with a filler loading of 30 wt.%. This result showed definite processability, which was not related with the distribution of the particle size of the material added. The recycled fiber board flour filled bio-composites showed applicability as substitutes for the bio-composites currently used in the bio-composites industry.

• Science of Emotion and Sensibility
• /
• v.17 no.2
• /
• pp.91-100
• /
• 2014

This study was to examine how visual angle of matrix corresponding to the physical properties of P300 speller and eye gaze corresponding to the user's personal characteristics influence on the accuracy of P300. Visual angle of the matrix was operated as the distance between the user and the matrix and three groups were composed: 60 cm group, 100 cm groups, and 150 cm group. Eye gaze methods was consisted three conditions. Head moving condition was putting eye gaze using head, pupil moving condition was moving pupil with the head fixed, while the eye fixed condition is to fix the eye gaze at the center of the matrix. The results showed that there was significant difference in the accuracy of P300 speller according to the eye gaze method. The accuracy of the head moving condition was higher than the accuracy of pupil moving conditions, accuracy of pupil moving conditions was higher than the accuracy of the eye fixed conditions. However, the effect of visual angle of matrix and interaction effect were not significant. When P300 amplitude of target character was measured depending on how you stare at the target character, P300 amplitude of the head moving condition was greater than P300 amplitude of the pupil moving condition. There was no significant difference in the error distribution in head moving condition and pupil moving condition, while there was a significant difference between two eye gaze conditions and fixed gaze condition. The error was located at the neighboring characters of the target character in head moving condition and pupil moving condition, while the error was relatively distributed widely in fixed eye condition, error was occurred with high rate in characters far away from the center of matrix.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.714-722
• /
• 2014

In the previous study, a variety of wood-based panels was thermally decomposed to manufacture carbonized boards that had been proved to be high abilities of insect and fungi repellence, corrosion and fire resistant, electronic shielding, and formaldehyde adsorption as well as sound absorption performance. Based on the previous study, carbonized medium density fiberboard (c-MDF) was chosen to improve sound absorption performance by holing and sanding process. Three different types of holes (cross shape, square shape, and line) with three different sanding thickness (1, 2, and 3 mm) were applied on c-MDF and then determined sound absorption coefficient (SAC). The control c-MDF without holes had 14% of SAC, however, those c-MDFs with holes had 16.01% (square shape), 15.68% (cross shape), and 14.25% (line) of SAC. Therefore, making holes on the c-MDF did not significantly affect on the SAC. As the degree of sanding increased, the SAC of c-MDF increased approximately 65% on sanding treated c-MDFs (21.5, 21.83, and 19.37%, respectively) compared to the control c-MDF (13%). Based on these results, composite sound absorbing panel was developed with c-MDF and MDF (11 mm). The noise reduction coefficient of composite sound absorbing panel was 0.45 which was high enough to certify as sound absorbing material.