• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.146-151
• /
• 2011

A method to evaluate and to reduce the source- and receiver- consistent noise in a cross-well travel time data was proposed. These systematic noises, which can cause some serious effects on the result of a travel time tomography, can be considered as the source and receiver statics. The method evaluates the statics through a curve-fitting of the first arrival travel times in the common source and common receiver gathers. Feasibility study was conducted on a synthetic data which simulates the cross-well travel time tomography to detect a small scale tunnel in a uniform background medium. First arrival travel times at a given source and receiver points are computed by a raytracing method, and the source consistent- and receiver consistent noises are added to the record. In case of the added noise with rms amounting to 25% of the maximum expected anomalous travel time delays, it is confirmed that the method successfully extracted the noise at the 7th step of iteration.

• Journal of the Korean earth science society
• /
• v.24 no.5
• /
• pp.467-476
• /
• 2003

For the seafloor acoustic image mapping of side scan sonar, the beginning step of the procedure is to fix the absolute sonar (tow-fish) position since the sonar is not hull mounted but towed astern. The technical algorithm used to calculate the actual sonar position without any other additional sub-system, i.e., the underwater acoustic position tracking system or the sonar attitude measuring device, was proposed. In the seafloor image mosaic mapping results using the sonar track (not ship track) developed in this study, any ambiguity or inconsistency of seafloor features was not found. The incidental effect from the sonar position determination procedure orients the towing direction of sonar to be smooth, consequently the swath pattern on the across-track direction becomes stable and the blanking phenomenon of the insonification area is reduced conspicuously. This technical method is considered to be an useful tool when applied toother underwater towing vehicle surveys.

• Geophysics and Geophysical Exploration
• /
• v.4 no.4
• /
• pp.110-114
• /
• 2001

In order to obtain the geological information of the shallow subsurface and the characteristics of resistivity curves to the lateral extent of the gold bearing gravel layer underlaid by a thick layer, electrical resistivity surveys had been carried out in the northern area of Takaoi village, Kalimantan, Indonesia from September 30th to October 27th in 1999. The Dipole-Dipole (Dp-Dp) resistivity survey was carried out with a electrode spacing of A=3m, 5m and electrode separation index n=10, and the vertical electrical sounding (VES) of the Schlumberger type was performed at 6 sites. The interpretation of the Dp-Dp data and VES curves by computer modeling indicates 5 classified layers as the horizontal structure. And the characteristics of VES curves shows us KH type.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.191-194
• /
• 2008

The cavity behind the tunnel lining, caused by overbrake, might be cause a severe instability during tunnel construction. So backfill grouting is essentially required. GPR(Ground penetrating Radar) is widely used to identify the position and size of the cavity and to verify the effect of the backfill grouting. In this study, GPR survey with 450 MHz antenna was implied to access the effect of the backfill grouting before and after the work to the crown part of ○○ tunnel in Seoul respectively. The result of GPR survey conducted before the backfill, was revealed that cavities behind the lining were existed in the areas of 8 spans. Finally, from the GPR survey implied after backfilling, it was turned out that backfill grouting was successfully carried out. Also, GPR survey was ascertained the better contact between lining and rock base at arrangement of bar span.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.119-124
• /
• 2008

Due to the recent development of instruments which enabled the measurements of subtle IP effect in the ground and analysis algorithms, complex resistivity (CR) method was expanding its application to various field. In this study, we applied the CR method to the test site where the ground reinforcement had been done by injecting the cement mortar for investigating the effect of ground reinforcement. For this site, resistivity monitoring and tomography survey was carried out while the ground reinforcement had been made by the grouting. From the result, the anomalous region that was shown on the result of resistivity 4D monitoring was coincident with those of phase section in the CR method, because the cement grouting material had the strong IP effects. It might be expected that the CR method should be very powerful surveying tool for the similar purpose.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1
• /
• pp.71-80
• /
• 1996

Characteristics of sleeve-gun arrays installed on the R/V Onnuri were analyzed and compared with survey data. In the case of cluster array, the beam width in the frequency range up to 814Hz is constant as $179.5^{\circ}$, and rapidly narrows in the frequency range of 814-1631Hz. However, in the case of long and wide arrays, as the frequency increases, the beamwidth decreases. The optimal frequency is 69Hz. the main lobe of vertical inclination has its maximum amplitude at phase angle $0^{\circ}$. The optimal frequency of cluster array which produces little side lobe is less than 1631Hz, and those of long and wide arrays are less than 108Hz. As a result, the cluster array produces a good source for high-resolution seismic survey, while the long and wide arrays are suitable for the survey of deep structures. The final high-resolution seismic section with cluster array was compared with that of long and wide arrays.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.74-74
• /
• 2017

자연하천에서 수자원의 원활하고 안전한 관리에 있어서 오염물의 혼합 거동에 대한 이해는 매우 중요하다. 대부분의 자연하천의 경우 만곡부 및 합류부와 같은 복잡한 지형을 갖고 있으며 이러한 경우 하천의 흐름이 복잡한 형태를 갖게 된다. 특히 수생태계에 많은 영향을 미치는 하폐수 처리장 처리수는 대부분 1차적으로 지류로 방류되어 이후 본류로 지속적으로 유입되게 된다. 이러한 오염물질이 지류로부터 본류로 혼합되는 합류부 구간의 경우 일반적인 1차원 혼합이 아닌 횡방향을 포함하는 2차원적인 혼합 거동에 대한 분석이 필요하다. 본 연구에서는 금호강과 진천천이 좌안으로부터 오염물질이 지속적으로 유입되는 낙동강 중류구간 합류부에서의 혼합 구간의 연구를 위하여 횡분산계수 산정을 위하여 전기전도도(electrical conductivity: EC)를 이용한 농도 추적 실험을 수행하였다. 낙동강 본류에서 정해진 측선을 따라 센서가 설치된 보트를 이용하여 실시간으로 농도, 수리량 데이터를 GPS 위치 데이터와 함께 취득하였다. 또한 실험으로부터 취득한 자료를 바탕으로 2차원 이송-확산 혼합 거동 모델인 CTM-2D 수치모형을 이용하여 모의하였다. 실험 수행 결과, 지류인 금호강과 진천천의 EC 농도가 합류 전 낙동강 본류의 EC 기저농도 보다 더 높은 값을 나타내었다. 지류의 유입으로 인하여 본류 좌안 쪽에서 전기전도도의 값의 상승을 확인할 수 있었으며 하류로 이동할수록 불균등했던 전기전도도의 분포가 횡방향 혼합을 통하여 점점 균등한 분포로 전환되는 것으로 나타났다. 또한 2차원 혼합 거동 분석에 필요한 횡 분산계수 산정을 위해 모멘트법, 해석해를 이용한 추적법, 수치모형을 통한 역산법을 통해 산정하여 결과를 비교하였다. 그 결과 모멘트법의 경우 다른 방법들에 비하여 전반적으로 과소 산정하는 경향을 나타내었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.260-260
• /
• 2022

최근 홍수기 유량측정방법은 기존 봉부자를 이용한 접촉식 측정방법에서 영상촬영, 레이더 등 첨단기술을 이용한 비접촉식 표면유속 측정방법으로 변화하고 있다. 비접촉식 측정방법은 각 기술마다 표면유속 측정방법의 차이가 있으나 평균유속환산계수를 적용하여 평균유속을 산정하는 공통적인 과정을 수행한다. 평균유속환산계수는 하천의 각 횡측선 수심-유속분포를 일반적인 분포로 가정하고 표면유속에 0.85를 곱하여 평균유속을 산정한다(Rantz, 1982). 그러나 하천의 측정위치 및 흐름특성에 따라 유속분포가 변화하기 때문에 국내외 많은 연구에서 환산계수의 범위를 0.72에서 1.72까지 제시한 바 있다. 따라서 환산계수 0.85의 일률적인 적용은 실제 유량과 측정 유량의 차이가 발생할 수 있어 측정조건의 적절한 환산계수 산정이 필요하다. 본 연구에서는 20년, 21년 금강의 지류인 봉황천에 위치한 금산군(황풍교) 관측소에서 전자파표면유속계를 이용해 측정한 표면유속과 ADCP를 이용하여 동시 측정한 평균유속의 비교를 통해 환산계수를 산정하였다. 또한 금강 본류의 금산군(제원대교) 관측소에서 저중수위에서 ADCP를 이용하여 측정한 평균유속 분포와 고수위에서 전자파표면유속계로 측정한 표면유속과의 경향성 검토를 통해 평균유속환산계수를 산정하였다. 본 연구에서는 지점의 평균유속환산계수를 단일 값으로 산정하였지만, 추후 하천 흐름특성의 변화를 고려한 평균유속환산계수 산정 기법 개발을 통해 보다 정확한 홍수량을 산정할 수 있을 것으로 판단된다.

• Journal of the Korean earth science society
• /
• v.30 no.6
• /
• pp.699-708
• /
• 2009

Recently as the interest in the development of domestic ore deposits has increased, we can easily find some studies on exploration geophysics-based ore-deposit survey in literature. Based on the fact that mineralized zone are generally more conductive than surrounding media, electrical resistivity survey among several geophysical surveys has been applied to investigate metallic ore deposits. Most of them are grounded on 2-D survey. However, 2-D inversion may lead to some misinterpretation for 3-D geological structures. In this study, we investigate the feasibility of the 3-D electrical resistivity survey to 3-D vein-type ore deposits. We first simulate 2-D dipole-dipole survey data for survey lines normal to the strike and 3-D pole-pole survey data, and then perform 3-D inversion. For 3-D ore-body structures, we assume a width-varying dyke, a wedge-shaped, and a fault model. The 3-D inversion results are compared to 2-D inversion results. By comparing 3-D inversion results for 2-D dipole-dipole survey data to 3-D inversion results for 3-D pole-pole survey data, we could note that the 2-D dipole-dipole survey data yield better inversion results than the 3-D pole-pole data, which is due to the main characteristic of the pole-pole array. From these results, we are convinced that if we have certain information on the direction of the strike, it would be desirable to apply 2-D dipole-diple survey for the survey lines normal to the strike. However, in most cases, we do not have any information on the direction of the strike, because we already developed the ore deposit with the outcrops and the remaining ore deposits are buried under the surface. In that case, performing 3-D pole-pole electrical resistivity survey would be a reasonable choice to obtain more accurate interpretation on ore body structure in spite of low resolution of pole-pole array.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.50-58
• /
• 2005

Recently, the imaging of geological structures beneath water-covered areas has been in great demand because of numerous tunnel and bridge construction projects on river or lake sites. An electrical resistivity survey can be effective in such a situation because it provides a subsurface image of faults or weak zones beneath the water layer. Even though conventional resistivity surveys in water-covered areas, in which electrodes are installed on the water bottom, do give high-resolution subsurface images, much time and effort is required to install electrodes. Therefore, an easier and more convenient method is sought to find the strike direction of the main zones of weakness, especially for reconnaissance surveys. In this paper, we investigate the applicability of the streamer resistivity survey method, which uses electrodes in a streamer cable towed by ship or boat, for delineating a fault zone. We do this through numerical experiments with models of water-covered areas. We demonstrate that the fault zone can be imaged, not only by installing electrodes on the water bottom, but also by using floating electrodes, when the depth of water is less than twice the electrode spacing. In addition, we compare the signal-to-noise ratio and resolving power of four kinds of electrode arrays that can be adapted to the streamer resistivity method. Following this numerical study, we carried out both conventional and streamer resistivity surveys for the planned tunnel construction site located at the Han River in Seoul, Korea. To obtain high-resolution resistivity images we used the conventional method, and installed electrodes on the water bottom along the planned route of the tunnel beneath the river. Applying a two-dimensional inversion scheme to the measured data, we found three distinctive low-resistivity anomalies, which we interpreted as associated with fault zones. To determine the strike direction of these three fault zones, we used the quick and convenient streamer resistivity.