• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.15-16
• /
• 2014

제한수역에서 측벽부근을 항행하는 대형선박에 미치는 측벽영향은 대단히 크고, 선박조종운동의 관점에서 보았을 때 상당히 중요한 문제이다. 이 연구에서는 측벽의 길이를 변화시키면서 측벽과 선박과의 종방향 및 횡방향 거리, 측벽의 길이 및 수심에 따른 측벽영향에 대하여 수치 계산하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.25-26
• /
• 2013

제한수역에서 측벽부근을 대형선박이 항행할 경우, 측벽으로 인하여 발생하는 유체력이 대형선박의 조종운동에 상당히 크게 영향을 미친다는 것은 잘 알려져 있다. 이 논문에서는 방파제형상을 하고 있는 측벽 부근을 대형선박이 항행하는 경우, 선박과 방파제 형상간의 간섭력 추정을 위해 세장체 이론을 토대로 한 계산 방법을 적용하였으며, 선박에 미치는 측벽의 영향을 파악하기 위하여 방파제길이, 방파제와 선박간의 거리 및 수심을 변수로 하여 선박과 측벽과의 간섭력을 수치 계산하였다.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.345-350
• /
• 2013

It is well known that the hydrodynamic forces and moments induced by the proximity of bank in confined waters, such as in a harbour or narrow channel affect ship's maneuvering motion. In this paper, the calculation method based on the slender body theory for estimation of the hydrodynamic force between ship and breakwater is applied, and also, the characteristic features of hydrodynamic force acting on a large vessel in the proximity of a breakwater are described and illustrated. Furthermore, the effects of water depth and the lateral spacing between ship and breakwater are summarized and discussed.

• Tunnel and Underground Space
• /
• v.11 no.1
• /
• pp.30-35
• /
• 2001

Focusing on the bench length, this paper presents the results of 3-dimensional elafto-plastic FE Analysis un tunnels of full face, mini-bench and short bench excavated in weathered rock. Influences of unsupported span, horizontal to vertical stress ratio, thickness of shotcrete on the behavior of rock and support were a1so studied. Results showed that displacements of mini-bench tunnels responded more sensitively to bench lengths than those of short bench. The effects of bench excavation on upper half displacement increased with longer unsupported span. Horizontal to vertical stress ratio showed a greater influence on displacement and preceding displacement ratio or sidewall rather than those of crown and invert.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.2
• /
• pp.63-70
• /
• 2011

Livestock buildings are rural facilities as vulnerable to natural disasters as vinyl houses. Many of livestock buildings have a roof but without side walls. The roof of such structures is easily blown away by a typhoon and this results in a heavy loss. Therefore, farmers install winch curtains on the sides to prevent damages caused by typhoons. This study purposed to examine the distribution of wind pressure coefficient among different positions of livestock shed roof according to the opening of side walls. It was found that according to the distribution of peak external pressure coefficient on the roof surface of livestock shed, the wind blowing at wind angle $0^{\circ}$ was disadvantageous to roof surface regardless of the presence of side walls. However, it was confirmed that the peak external pressure coefficient was affected by wind angle and the length of eave depending on the presence of side walls.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.5
• /
• pp.21-28
• /
• 1999

A new method of making high speed self-aligned ESD (Elevated Source/Drain) MOSFET is proposed. Different from the conventional LDD (Lightly-Doped Drain) structure, the proposed ESD structure needs only one ion implantation step for the source/drain junctions, and makes it possible to modify the depth of the recessed channel by use of dry etching process. This structure alleviates hot-carrier stress by use of removable nitride sidewall spacers. Furthermore, the inverted sidewall spacers are used as a self-aligning mask to solve the self-align problem. Simulation results show that the impact ionization rate ($I_{SUB}/I_{D}$) is reduced and DIBL (Drain Induced Barrier Lowering) characteristics are improved by proper design of the structure parameters such as channel depth and sidewall spacer width. In addition, the use of removable nitride sidewall spacers also enhances hot-carrier characteristics by reducing the peak lateral electric field in the channel.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.2
• /
• pp.51-59
• /
• 2000

네일(또는 락볼트)은 토사터널의 NATM 시공 시 보강재로 사용되어진다. 그러나, 네일의 적절한 설치방법이 아직까지 정립되지 않았다. 본 연구에서는 네일의 길이와 위치를 변화하여, 그 효용성을 연구하였다. 그 결과, 네일이 지반보강을 위하여 토사지반에 사용될 시 경제적인 길이는 터널직경의 0.5배이다. 보강의 효용성은 네일의 위치에 따라 터널라이닝 측벽의 하부, 중부, 상부의 순서이다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.90-90
• /
• 2008

실리콘을 기판으로 하는 대부분의 태양전지에서는 표면반사에 의한 광에너지손실을 최소화시키고자 습식에칭(wet etching)에 의한 텍스쳐링처리가 이루어진다. 그러나 습식 에칭은 공정 과정이 번거롭고 비용이 많이 든다. Inductively Coupled Plasma Etcher 장비를 이용한 플라즈마 에칭 (plasma etching)을 실리콘 표면에 적용하여 공정을 간단하고 저렴하게 하며 반사도를 획기적으로 낮추는 기술이 개발되었다. 습식 에칭으로 형성된 표면의 피라미드 구조는 1차 반사 후 빛의 일부가 외부로 흩어져 나가지만 플라즈마 에칭으로 형성된 나노구조는 내부전반사가 가능하여 대부분의 태양 에너지를 흡수한다. 나노구조는 필라(pillar)의 형태로 형성되며 이 필라의 길이에 따라 반사도가 다르게 나타난다. 이는 플라즈마 에칭 시 발생하는 이온폭격과 에칭 측벽 식각 보호막(SiOxFy : Silicon- Oxy- Fluoride)이 필라의 길이에 영향을 주기 때문이며, 필라가 길수록 반사도를 저하시킨다. 최저의 반사도를 얻기 위해서 나노필라 형성에 기여하는 플라즈마 에칭 시간, RF bias power, SF6/O2 gas ratio의 변화에 따른 실험이 진행되었다. 플라즈마 발생 초기에는 표면의 거칠기만 증가할 뿐 필라가 형성되지 않지만 특정조건에서 3um 이상의 필라를 얻는다. 이는 에칭 측벽 식각 억제막이 약한 부분으로 이온폭격이 집중되어 발생한다. 플라즈마 에칭을 적용하여 형성된 나노필라는 반사도가 가시광 영역에서 대략 1%에 불과하며, 마스크 없이 공정이 가능한 장점이 있다.

• Journal of Animal Environmental Science
• /
• v.16 no.2
• /
• pp.109-114
• /
• 2010

In South Korea, mora than 90% of swine barns had open-style side wall by winch operation, and less than 5% of swine barns were semi-windowless or windowless style. The aisle ventilation system of the barn was changed to roof-wall ventilation system, and the width and the length of barns were 10~12 m and 30~50 m, respectively. The width of aisle satisfying energy save was 2~3 m. The re-modeled barns inhaled air through duct which was opened to aisle and exhaled through forced ventilation fans on the windowless wall which was accomplished by installing planks on the open wall. After remodelling, the culling ratio and energy cost were decreased from 11% (47 heads) to 3% (12 heads) and from 1,550,000 won to 730,000 won, respectively. Hence, re-modeled swine barns raising 400 heads could save 2,835,680 won during winter (from December to March).

• Solar Energy
• /
• v.10 no.1
• /
• pp.31-37
• /
• 1990

An experimental study for the flow in an axisymmetric cavity of rectangular tube was performed. The pressure and heat transfer coefficient along the side and opposite-walls of the cavity were measured. The cavity length was varied from 80mm to infinity during the experiment. As the result of this study, it was found that as the length of cavity increased beyond the reattachment point, the heat transfer coefficient decreased. It was also found that the mean heat transfer coefficient became maximum near the reattachment point.