• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.42-46
• /
• 1998

Miniaturized specimen technology Permits mechanical behavior to be determined using a minimum volume of material. The technology is useful in case of not collecting a large amount of materials from industrial equipments. Five kinds of accelerated degradation materials were prepared by isothermal aging heat treatment at $630^{\circ}C$. Three kinds of specimens were prepared for impact testing. In order to increase plastic constraint of subsize specimen, side-groove was introduced. Results between subsize and full size impact testing were compared. Size effects correlations were developed for the impact properties of turbine rotor material. These correlations successfully predict the ductile brittle transition temperature (DBTT) of full size Charpy impact specimens based on subsize specimen data.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.5
• /
• pp.279-286
• /
• 2019

In this study, a numerical investigation is conducted for the shock deceleration prediction of a conical impactor in gas-gun tests. With the development of weapon systems, gas-gun tests are required to validate the survivability and structural reliability of devices under test (DUT) in high-G shock environments, such as those over ten thousand Gs or more. As shock endurance is highly influenced by various bird parameters, such as mass, velocity, and pressure, it is important to determine the appropriate test conditions to generate a high-G shock environment. However, experimental repetitive studies are inefficient to validate test conditions in terms of economic aspects. Therefore, a numerical technique is required to replace experimental gas-gun tests. Here, a numerical investigation is conducted with ANSYS AUTODYN using explicit code. Through this investigation, the dynamic behavior of DUT is presented. In addition, the results of numerical studies are verified through a comparison with the experimental results of a gas-gun test.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.11
• /
• pp.7-17
• /
• 2022

This study investigates the effect of cylindrical baffle arrays behind a rigid barrier on debris flow behavior and dynamic impact load. Small-scale tests were performed with various transverse blockage ratios and row numbers of baffles. High-speed cameras were installed at the flume's top and side, and load cells were installed in front of the rigid barrier. Moreover, glass beads simulated large boulders with debris flow in the flume. Test results revealed that the impact load of debris flow on the rigid barrier was significantly reduced using the cylindrical baffles behind the rigid barrier. In addition, the increased transverse blockage ratio of baffle arrays led to a greater impact load of debris flow because of flow suppression due to the baffle arrays.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.719-725
• /
• 2010

The analysis and experimental program of reinforced concrete (RC) structures for resistance against such extreme loads as earthquake, blast, and impact have been carried by many researchers and designers. Under the extreme loads, a large amount of energy is suddenly exerted to the structure, hence if the structure fails to absorb the impact energy, catastrophic collapse may occur. To prevent catastrophic collapse of structures, reinforced concrete must have adeguate toughness or it needs to be strengthened. The FRP strengthening method and SFRC are studied widely in resistance of impact load because of their high energy absorption capacity. In this study, drop weight impact tests were implemented to evaluate the impact resistance of SFRC and FRP strengthened RC beam while the total steel fiber volume fractions was fixed at 0.75% carbon FRP flexural strengthened RC beams. Futhermore, to prevent the shear-plug cracks when the impact load strikes the beams, additional FRP shear strengthening method are applied. The experimental, results showed that the FRP strengthened RC SFRC beams has high resistance of shear-plug cracks and crack width and SFRC has high resistance of concrete spalling failure compared to normal RC beams. The FRP flexural and shear strengthening RC beams has weakness in the spalling failure because the impact load concentrated the concrete face which is not strengthened with FRP sheets.

• Water for future
• /
• v.21 no.2
• /
• pp.173-182
• /
• 1988

Characteristics of finite difference schemes for St. Venant equation were compared with two input cases. One is the monoclinal wave which has large friction slope without discontinuity and the other is the shock wave with discontinuity. For monoclinal wave, Keller Box scheme is the best in terms of accuracy, efficiency and stability when two parameters were selected with a rele : $0.5{\leq}{\theta}{\leq}1.0$, ${\theta}+{\psi}$=1, But for shock wave only the Preissmann type of parameter ${\psi}$(=0.5) showed stable results. Numerical experiments of monoclinal wave showed that Lax-Wendroff and Richtmyer schemes were more stable than leap Frog and more accurate than Lax-Fredrich scheme. For shock wave Lax-Fredrich showed larger numerical dissipation than other explicit schemes and Leap Frog produced slower mass transport.

• Journal of the Korean Data and Information Science Society
• /
• v.5 no.2
• /
• pp.75-85
• /
• 1994

In this paper, I introduce the goodness-of-fit test statistics for exponential distribution using accelerated life test data. The ALT lifetime data were obtained by assuming step-stress ALT model, specially TRV model introduced by DeGroot and Goel(1979). The critical values are obtained for proposed test statistics, Kolmogorov-Smirnov, Kuiper, Watson, Cramer-von Mises, Anderson-Darling type, under various sample sizes and significance levels. The powers of the five test statistic are compared through Monte-Cairo simulation technique.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.15-15
• /
• 1998

마하 수 6 이상인 극초음속 비행에는 스크램제트(SCRamjet : Supersonic Combustion Ramjet) 엔진이 가장 적합한 엔진으로 알려져 있고 현재 미국을 중심으로 이 엔진의 개발에 많은 노력을 기울이고 있다. 스크램제트 엔진의 성공적인 개발을 위해서는 초음속 공기 내에서 연료의 분사를 통한 가장 효율적인 연소를 유도할 수 있어야 한다. 초음속 상태의 공기와 연료의 혼합을 증대시키고 연소안정성을 향상시키는 방법으로 연소기 내에 인위적으로 경사충격파를 발생시키는 방안이 Marble 등에 의해 최초로 도입되었다. 본 연구에서는 스크램제트엔진 내의 연소기를 모델링하여 마하수 2.5의 초음속공기 유동 중앙에 수소 제트를 분사하여 초음속 수소-공기 화염을 만들고 연소기의 측면에 동일한 모양과 크기의 쐐기를 각각 부착시켜 평면 경사충격파를 발생시켰다 본 실험은 충격파가 초음속 화염에 미치는 영향을 연구한 최초의 실험연구이다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.3
• /
• pp.38-48
• /
• 2005

For the development of Scramjet engine technology, intake designing processes are investigated. The basic geometry is determined by the inviuld relation such as shock wave relations and geometric relations. Furthermore, bleed duct is installed for preventing boundary layer development and shock wave impingement. Performance of the designed intake is validated by numerical analysis. As a result, double- wedge intake showed better characteristics in total pressure recovery than single-wedge intake.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.307-310
• /
• 2001

콘서트 홀 등의 음향 측정을 측정하는 데 있어 다채널 마이크로폰을 이용하여 그 공간의 반사음 패턴을 파악하는 기술이 널리 이용되고 있다. 이 기법은 그 공간 특유의 반사음의 입사 시간과 방향을 측정할 수 있을 뿐만 아니라, 충격응답(Impulse response)의 측정을 기반으로 하므로 기존에 사용되고 있는 모든 모노성의 음향 특성의 측정에도 이용할 수 있다. 그러나 LEF나 IACC등의 다차원의 음향 특성의 측정을 위해서는 양지향성 마이크로폰이나 더미헤드 등을 이용한 측정을 별도로 수행하고 있다. 본 연구에서는 다채널 마이크로폰으로 구한 방향성 충격응답으로부터 각각의 반사음들의 특성을 구하고 그 결과에 양지향성 마이크로폰의 지향특성을 적용하여 LEF를 얻어내도록 하였다. 제안하는 기법의 유효성을 검증하기 위하여 기존의 무지향성 및 양지향성 마이크로폰을 이용하여 구한 결과와 비교, 분석하였다

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.869-875
• /
• 1998

원자력발전소 소외전원 상실 시 발전소를 안전하게 정지시키기 위한 비상디젤발전기의 신뢰성 평가는 계속적으로 수행되고 있는 연구과제 중 하나이다. 본 논문에서는 동적 시스템 모델링 툴을 사용하여 비상디젤발전기의 동적 신뢰도 평가를 위한 Markov모델을 구축하였다. 구축한 동적 신뢰도 모델을 이용하여 NUREG/CR-4810에서 제안한 분석방법의 모순점을 보완하여 Reg. Guide 1.108의 비상디젤발전기 가속시험주기 규정을 이용불능도 측면에서 검토하였다 또한 비상디젤발전기의 이용불능도는 기동실패확률 및 보수율과 기동실패 중 기동시 충격에 의한 고장 비율의 함수인 점을 고려하여 가속시험주기 규정을 따를 때 보수율과 기동시 충격에 의한 고장 비율이 이용불능도의 변화에 미치는 영향을 시뮬레이션하였다.