• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.7-9
• /
• 2020

현재 드론을 이용한 측량 기술은 '드론 사진측량' 방식이 일반적이다. '드론 사진측량' 방식은 드론의 고질적인 문제점인 배터리 문제와 모델링 시 시간이 오래 소요된다는 단점이 있다. 따라서 효율적이고 새로운 방식의 드론 측량 기법이 필요한 실정이다. 본 논문에서는 드론을 활용하여 수치지적의 경계점 좌표 기반의 새로운 측량 방식을 제안하여 경계 복원 측량의 효율성을 향상시키고자 한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.39-46
• /
• 2014

Network RTK GNSS positioning technique which has been developed to overcome the limitation of Single reference station RTK is used widely in the field of general surveying, cadastre surveying and engineering surveying due to the high accuracy and efficiency. It is specified Network RTK, Single reference station RTK and Static of GNSS as a surveying method in the regulation of Cadastre Re-survey Surveying. In this study, Network RTK and Static GNSS surveying were accomplished at cadastral re-survey field in Hadong, Gyeongnam and the surveying results were compared. Also, to analyze the performance of site calibration in Network RTK surveying, two types of Network RTK surveying with and without site calibration were accomplished and the results was compared. The research result shows that average positioning error between Network RTK(VRS) without site calibration and Static surveying result is 2.44cm and 1.53cm respectively and average positioning error between Network RTK(VRS) with site calibration and Static surveying result is 0.19cm and 0.82cm respectively at two zone. So, it was proved the effect of calibration in network RTK(VRS) surveying.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.111-118
• /
• 2002

These days, surveying instruments are developing rapidly and the precision is improving continuously. The building of three dimensional terrains of high precision are possible and the calculation of the areas or the volumes have high precision due to the development of the technique of the spatial information system using computer. But actually, in construction site they calculate two-dimensional area using the traditional method, plate table surveying, planimeter, and then get three-dimensional area through multiplying two-dimensional area by the slope correction factor. In this study, we show the defect and inefficiency of the calculation of area by the traditional methods and survey the area with Electric Distance Measurement and GPS instrument. With this data, we made the three dimensional terrain model and calculated two-dimensional area, three-dimensional area. After that, we compared areas that calculated by algorithm of triangulated irregular network and analysis of grid method with standard area that calculated by the traditional method. Finally, this paper suggested more effective and precious method in calculating three-dimensional area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.179-186
• /
• 2010

In this research, an effective method for absolute positioning of feature points is proposed, which is applicable to geo-referencing of terrestrial LiDAR data scanned in dense urban areas. GPS positioning, common in absolute positioning, is apt to fail in the presence of signal disturbancein dense urban circumstances, while traditional surveying methods, including traversing and leveling, are generally more costly for wider areas. The idea is that reference points, marked on top of buildings, are surveyed by GPS positioning and then feature points are relatively positioned from the reference points. The present method, if laser scanning is accompanied, gets two advantages; one is that less feature points need to be surveyed because they can be substituredby reference points, and the other is that laser scanning can be more stably carried out. The present method was shown, from the experiments, to be cost-effective against traditional ones.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.65-69
• /
• 2004

기존 라디오파를 이용한 RTCM 방식에서는 전파의 직진성으로 인한 수신 장애가 많이 발생하였다. 이런 문제를 극복하기 위해 라디오 모뎀을 사용하지 않고 휴대폰에 내장된 CDMA 방식을 이용하여 이동전화국 기지국을 통한 오차 보정량을 전송하여 RTK-GPS의 문제점을 해결하고자 하였다. 연구 결과 기존 RTCM 방식과 같은 건물 차폐에 따른 신호 차단의 영향은 없었으며, 제적 작업 시에도 라디오 모뎀의 송수신의 장애로 인한 데이터 손실을 막을 수가 있었다. 마지막으로 10km이상의 거리에서도 작업을 수행하였다. 그 결과 이동전화국 기지국을 이용하였기 때문에 신호의 송수신에는 문제가 없었지만, 공간적 상관성의 문제로 인해 그 값을 쓸 수가 없었다. 따라서, 최근 증가하고 있는 GPS 측량 기법 중에서 현장에서 손쉽게 성과 값을 구하는 실시간 이동측량(RTK GPS Real Time Kinematic GPS)의 문제점을 보완하고 그 효율성을 제고하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.139-147
• /
• 2008

The positioning accuracies tend to deteriorate as the distance between the rover and the reference station increases in the Real-Time Kinematic (RTK) surveys using Global Positioning System (GPS). To solve this problem, the National Geographic Information Institute (NGII) of Korea has installed Virtual Reference System (VRS), which is one of the network-based RTK systems. In this study, we conducted the accuracy tests of the VRS-RTK surveys. We surveyed 50 control points inside the NGII's GPS Continuously Operating Reference Stations (CORS) network using the VRS-RTK system, and compared the results with the published coordinates to verify the positioning accuracies. We also conducted the general RTK surveys at the same control points. The results showed that the positioning accuracy of the VRS-RTK was comparable to that of the general RTK, because the horizontal positioning accuracy was 3.1 cm while that of general RTK was 2.0 cm. Also the vertical positioning accuracy of VRS-RTK was 6.8 cm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.16-21
• /
• 2011

Bathymetry which is mainly used on the earth or the sea can be surveyed directly by a person who is on a surveying ship or in a way one estimates the target through a surveying ship. However, the surveying ship which is being used now is divided into a manned and unmanned system and it's difficult to deal with it appropriately according to the water depth or the condition of weather. Therefore, this study will invent the surveying ship that can measure the water depth with the unmanned remote control system in the place where it's difficult to for man access because of a bad weather or a vast area. There are two methods in the control system of the manned and unmanned surveying ship which has been developed in this study. One is an automatic control which moves on the path set by the user in advance and the other is the optimized passive control in which the control station can manage the direction and speed of a surveying ship directly.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.55-63
• /
• 2013

Network-RTK GPS positioning technique based on national CORS(Continuous Operating Reference Station) and wireless internet access as like VRS and FKP was developed to overcome the limitations of traditional RTK technique. In Korea, NGII(National Geographic Information Institute) provides network-RTK service based on 51 CORS and mobile internet network. The purpose of this study is the accuracy evaluation of the height determined by GPS VRS technique based on network-RTK, So, in this study GPS VRS positioning was accomplished through 1st level BM line located at Sancheong~Jinju and $2^{nd}$ level BM line located at Geochang~Sancheong and the average error of the each BM line was calculated as 2.15cm and 1.80cm respectively. This result shows that GPS VRS height positioning can be used in $3^{rd}$ and 4th public BM leveling and also work regulation is needed to apply the GPS VRS height positioning.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.1 no.1
• /
• pp.29-43
• /
• 1983

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.539-547
• /
• 2012

Volume survey for earthwork is conducted periodically at every month at large scaled construction sites for request payment for the construction. Currently, the earthwork volume is calculated on the overlapped drawing for two cross sections which were created by new and previous surveying data observed by GPS and TS. However the survey is required lots of time and expenses as it is a pin-point surveying method thus surveyors intend to get data only for the heavy undulated topographic features chosen by himself to save time and expenses. Consequently, it causes poor results due to low dense measurement as well as it's not matched with the results by another surveyors. As a result, the conflicts related in earthwork volume calculation often arises among the owner, contractors and sub contractors. In this study, we developed a method to get surveying data for fast and accurate volume calculation using 3D Mobile Laser System and conducted an application test. Also we carried out experiments for topographic survey using MLS to judge for the application additionally. The results showed that we could reduce a time for cross section survey from 48 hours to 2 hours and collected high dense data which have 0.2m interval instead of 3m interval compare with existing method. Also we could make a map which has high accuracy within 10cm in horizontal through topographic survey using MLS.