• Title/Summary/Keyword: 취약성 평가

Search Result 1,502, Processing Time 0.033 seconds

A Experimental Study on a change of wave overtopping volumea with a reduced scale (축척에 따른 월파량 변화에 관한 실험적 연구)

  • Park, Hyun Soo;Lee, Sang Jin;Park, Sang Kil
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2004.05b
    • /
    • pp.1459-1463
    • /
    • 2004
  • 최근 빈번하게 발생하는 기상이변현상의 하나로 발생한 제14호 태풍 "매미"는 한반도 남부지방을 통과하면서 강풍과 해일을 동반하여 해안에서는 해일이 발생하여 평균해수면의 상승과 파의 쳐올림(run up)에 의한 월파량(wave overtopping volume)으로 예상치 못한 침수피해가 속출하였다. 태풍으로 인한 주된 피해로써 특히, 침수피해는 이상고조로 인해 평균수위 상승이 만조와 겹침으로써 기존의 호안, 제방 등의 천단고를 넘어서 파의 쳐올림에 의한 월파량으로 호안 배후지의 침수피해가 발생하게 된다. 이러한 월파현상에서 월파량이 축척되면서 배후지에 축척된 수량에 의해 침수피해가 발생되는 근본적인 원인은 파의 쳐올림의 높이에 비해 호안의 제방 높이가 상대적으로 낮다는 데 있다. 우리나라 매립지의 지반고는 과거에 설계 시공한 인근 매립지의 지반고와 동일한 높이로 하고 있는 데 이러한 개념은 인근 지대와 동일조건을 부여하여 배후지에서 발생할 수 있는 여러 가지 문제점을 해결할 수 있는 장점이 많지만, 이건 설계방범은 해안공학적인 측면이 강조되어 설계되었다기보다 사회 경제적 측면을 강조하여 설계되어 왔기 때문에 이번과 같은 태풍에 대한 방재대책이 될 수 없었던 것이다. 따라서 원만한 방재대책이 수립되기 위해서는 과거의 설계방법을 탈피하여 현지조건을 정확하게 조사한 후 이를 근거로 하는 설계가 요구된다. 본 연구는 해안공학적 측면에 중점을 두고 수행하였다. 첫째로, 태풍 제14호 "매미"의 현황을 파악하여 조석현황과 이상고조, 파고추정의 범위를 결정한다. 또, 부산지방의 피해현장을 조사하여 피해의 유사성을 밝힌다. 둘째로, 송도 매립지 호안 전면에서의 월파현상과 월파량을 검토한다. 셋째로, 대체블록에 대해 간략 계산을 통해 유동성을 검토하였다. 이와 같은 연구과정을 통해 태풍이 내습했을 때 호안 배후지내의 월파량 철상을 2차원 수리모형실험을 통해 재현시켜 검토하고, 월파량을 평가기준으로 축척모형을 해안수리학적인 측면에서 검증하였다. 본 2차원 수리모형실험에서 재현시킨 월파량이 현실적으로 어느 정도의 월파량이 되는지는 계산에 의한 방법으로만 추정할 수 있으며, 여기서는 2차원 수리모형실험을 실시했던 자료를 이용하여 현재까지 알려진 방법으로 몇 가지 경우 즉, 현실적으로 일어날 가능성이 있는 최악의 경우에 대해 계산한 겉과, 동일조건에서 축척이 적을수록 추정 월파량이 많음을 알 수 있었다. 이것은 태풍이 내습하여 현실적으로 발생했던 월파량이 더욱 많았음을 유추할 수 있다. 또한, 태풍과 같은 자연재해, 특히 월파량에 대해 취약한 구조를 가진 호안의 경우 여러 가지 대안 중 인공쇄파대(artifical reef)와 같은 완충지대를 갖는 호안을 축조함으로써 월파량을 감소시키는 대안으로 제시하고자 한다. 본 연구 수행을 통해 태풍 내습시 발생 가능한 자연재해에 대한 사전 방지를 목적으로 태풍피해의 원인을 제시하고 이를 해결하여 현재의 방재대책이 항구적인 방재대책으로 전환될 수 있는 방안 마련의 기초 자료로 활용되기를 기대한다.

  • PDF

Revisiting design flood estimation of Nam River Dam basin considering climate change (기후변화를 고려한 남강댐 유역의 홍수량 재산정)

  • Lee, Hyunseung;Lee, Taesam;Park, Taewoong;Son, Chanyoung
    • Journal of Korea Water Resources Association
    • /
    • v.49 no.8
    • /
    • pp.719-729
    • /
    • 2016
  • Extreme events of rainfall has increased mainly from climate change, resulting in more severe floods intensified by land use development. Appropriate estimation of design floods gets more attention to ensuring the safety of life and property in flood-prone areas for hydraulic structures such as dams and levees. In the current study, we reestimated the design flood of the Nam River Dam to adopt the influence of climatic change of hydrometeorological variables including recent datasets of extreme rainfall events. The climate change scenarios of extreme rainfall events in hourly scale that has been downscaled was used in analyzing the annual maximum rainfall for the weather stations in the Nam River Dam basin. The estimates of 200-year and 10,000-year return periods were calculated to provide a design flood and a probable maximum flood case for the Nam River Dam. The results present that the new estimate employing the RCP4.5 and RCP8.5 downscaled data is much higher than the original design flood estimated at the dam construction stage using a 200-year return period. We can conclude that the current dam area might be highly vulnerable and need an enhancement of the dam safety regarding the reduction of damage in Sachen bay from the outflow of Nam River Dam.

Development for the Water Mist Package Having a Low Pressure Nozzles on Wooden Cultural Properties and Temples (중저압 노즐을 이용한 사찰 및 목조 문화재용 미분무 패키지 소화설비 개발)

  • Kim, Tae-Hwan;Myeong, Sang-Yeong
    • Fire Science and Engineering
    • /
    • v.24 no.4
    • /
    • pp.62-68
    • /
    • 2010
  • The present study purposed to develop the water mist package system for the cultural properties fire prevention and fire suppression system through analyzing fire protection system and cultural property's characteristic, and to suggest directions for the development of cultural property fire prevention system in the future. Maximum safety with minimum damage has issued a main objective in fire protection of the cultural property in Korea. Two types of the water mist nozzles having a low pressure had been developed by KEI. The one is for inside using in wooden cultural properties, the flow rate is 30~35 l/min and the discharging pressure is 13~14 bar. The other one is for out-side of wooden properties, the flow rate is 25~30 l/min and the discharging pressure is 14~15 bar. To evaluate the nozzles performance test, we made the fire scenario and full-scale model of wooden cultural properties for fire test. The size of full-scale model was 4.9 m length, 4 m wide, 6.6 m height, all was made by wooden. This real fire test results showed that the low pressure water mist nozzles having a $200{\mu}m$ dour size were very effectively fire extinguishing and suppression on wooden cultural properties fire. Even though the oil fuel fire was not extinguished, the fire suppression effects for the during mobilization of fire brigade was enough.

Study on the Characteristics of Odor Emitted from Swine Facilities (양돈시설에서 발생하는 악취특성에 관한 연구)

  • Kim, Jae Hyuck;Yoo, Kyung Seun;Oh, Je Beom;Jung, Ju Young
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.34 no.7
    • /
    • pp.439-444
    • /
    • 2012
  • We studied the characteristics of odor emitted from 40 swine facilities across the country under various conditions like rearing densities, management style, ventilation system and swine manure handling characteristics, based on the olfactory and analytical evaluation. Odor concentrations (D/T) measured from swine facilities were respectively an average 4,055 D/T at liquid manure storage tanks on aeration, an average 913 D/T at slurry manure storage, an average 506 D/T at finishing swine facilities and an average 201 D/T at composting facilities. The higher rearing densities and slurry accumulation volume in finishing swine house, the more odor concentration (D/T) was increased. But The odor concentration (D/T) in finishing swine house did not show significant difference according to application of microbial additives. 9 odor compounds ($NH_3$, $H_2S$, MM, DMS, DMDS, PA, n-BA, n-VA, i-VA) were detected at swine facilities and the main odor compounds were volatile sulfur compounds such as $H_2S$, MM and volatile fatty acids compounds such as n-BA, n-VA, i-VA. 97.5% of swine farms surveyed in this study is located within 300 m of residential area and it is easy to bring odor complaints.

Experimental Studies on the Effect of Various Design Parameters on Thermal Behaviors of High Strength Concrete Columns under High Temperatures (다양한 설계변수에 따른 고강도 콘크리트 기둥의 열적 거동 분석을 위한 실험 연구)

  • Shin, Yeong-Soo;Park, Jee-Eun;Mun, Ji-Young;Kim, Hee-Sun
    • Journal of the Korea Concrete Institute
    • /
    • v.23 no.3
    • /
    • pp.377-384
    • /
    • 2011
  • Although concrete is considered as fire proof materials, high strength concrete shows severe material and structural damages when exposed to fire. To understand such damages in high strength concrete structures, the effects of various design parameters and fire condition on the thermal behaviors of high strength concrete structures are investigated in this study. In order to achieve this goal, fire tests are performed on high strength concrete columns with different fire conditions and design parameters including cross sectional area, cover thickness, and reinforcement alignment. To investigate thermal behaviors, temperature distributions and amount of spalling are measured. In overall, the columns show rapidly increasing inner temperatures between 30~60 mins of the fire tests due to spalling. In detail, the higher temperature distributions are observed from the columns with the larger cross section and less cover thickness. Moreover, among the columns with same reinforcing ratio, larger number of reinforcements with the smaller diameter causes the higher temperature distribution. The findings from the experimental study allow not only understanding of thermal behaviors of high strength concrete columns under fire, but also guidance in revising fire safety design.

A Case Study on the TEMAZ Explosion Accident in Semiconductor Process (반도체 공정에서 TEMAZ폭발사고 사례연구)

  • Yang, Won-Baek;Rhim, Jong-Kuk;Hong, Seong-Min
    • Journal of the Korean Institute of Gas
    • /
    • v.21 no.6
    • /
    • pp.52-60
    • /
    • 2017
  • In diffusion process exhaust line during semiconductor manufacturing process, In order to improve the transportation efficiency in the piping by removing "The reaction by-product, $ZrO_2$ and The unreacted material, TEMAZ, TMA, $O_3$, etc" and "Powder being deposited", the piping temperature was raised to $80^{\circ}C$ or more by using the heater jacket, and the bellows at the rear end of the vacuum pump ruptured. So conducted a case study and try to prevent the similar accidents from occurring through case studies. The causes of the accident were analyzed as follows: the inflow of outside air due to the generation of a gap on the suction side of the vacuum pump and heating the pipe with the heater jacket resulted in the overpressure in the pipe due to the volumetric expansion of the gas generated by decomposition of the unreacted TEMAZ, It can be assumed that the most vulnerable bellows of the piping has been ruptured. In order to prevent such accidents, This study is aimed to identify the cause of pipeline rupture accident and to establish safety measures for the prevention of similar accidents by evaluating physical hazards of TEMAZ, which is assumed to be the cause of pipe rupture accident.

A Study on the Ultimate Strength Behavior for Ship Perforated Stiffened Plate (선체 유공보강판의 최종강도 거동에 관한 연구)

  • Ko Jae-Yong;Lee Jun-Kyo;Park Joo-Shin;Bae Dong-Kyun
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2005.05a
    • /
    • pp.141-146
    • /
    • 2005
  • Ship have cutout inner bottom and girder and floor etc. Ship's structure is used much, and structure strength must be situated, but establish new concept when high stress interacts sometimes fatally the area. There is no big problem usually by aim of weight reduction, a person and change of freight, piping etc. Because cutout's existence grow up in this place, and, elastic buckling strength by load causes large effect in ultimate strength. Therefore, stiffened perforated plate considering buckling strength and ultimate strength is one of important design criteria which must examine when decide structural concept at initial design. Therefore, and, reasonable buckling strength about perforated stiffened plate need to ultimate strength limited design . Calculated ultimate strength varied several web height and cutout's dimension, and thickness in this investigated data. Used program(ANSYS) applied F.E.A code based on finite element method.

  • PDF

Hair Strengthening Effect of Silane Coupling and Carbodiimide Chemistry (카르보디이미드 반응과 실란 커플링을 이용한 모발강화 효과)

  • Son, Seong Kil;Choi, Wonkyung;Lim, Byung Tack;Song, Sang-hun;Kang, Nae Kyu
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.44 no.2
    • /
    • pp.133-139
    • /
    • 2018
  • Chemically damaged hair is vulnerable to external stimuli in daily life due to the weakened physical properties of the hair strand itself. The purpose of this work was to determine whether chemical conjugation between hair keratin proteins restores tensile strength and thus results inpreventing further deterioration under repeated combing. A model damaged hair tress was produced by a typical perm-process. Then, it was internally crosslinked by the bifunctional crosslinker (3-aminopropyl)triethoxysilane (APTES), via both silane coupling and carbodiimide chemistry. Physical properties, including tensile strength, Young's modulus, and plateau stress, were measured to verify the effect of internal crosslinking, and the existence of crosslinking was verified by Fourier transform infrared (FT-IR) spectroscopy. The degrees of hair breakage and split ends were evaluated by repeated combing-drying tests. Physical properties of chemically damaged hair were restored by internal crosslinking. Successful crosslinking of APTES via both silane coupling and carbodiimide chemistry was verified by FT-IR spectra. Prevention of breakage and split ends after repeated combing with heat was observed. Human hair can be weakened by chemical damage including perm-processing, so restoring such properties is a major issue in the hair care industry. This work shows that internal crosslinking of damaged hair via chemical conjugation would be a potent method to restore the healthy hair.

The Impact of on Organizational Performance of Self-Leadership by Worker in Social Enterprise and Profit Enterprise (사회적기업과 영리기업에서 근로자 셀프리더십이 조직성과에 미치는 영향)

  • Lee, Yong-Jae;Kim, Mi-Wha
    • Journal of Digital Convergence
    • /
    • v.15 no.4
    • /
    • pp.139-149
    • /
    • 2017
  • The purpose of this study is to compare and analyze the impact of self-leadership by worker in social enterprises and profit enterprise. For this purpose, 36 social enterprises and commercial enterprises in Chungcheongnam-do and 303 workers were surveyed. Main results are as follows. First, the workers in social enterprises and profit enterprises have many different characteristics. The workers who work in social enterprise is more women, less educated and were the elderly than profit enterprise. This is the reason that social enterprises are employing women, elderly and vulnerable groups by the government's social work support policy. Second, self leadership and all organizational Performance areas in social enterprises is higher than that of profit companies. Third, self-leadership in social enterprise and profit enterprise has positive effect on organizational performance. Therefore, in order to improve the organizational performance of social enterprises must share organizational vision and goals for the workers. It will increase the organizational competitiveness. The Journal of Digital Policy & Management. This space is for the abstract of your study in English.

Chemical Resistance Characteristics of the Chlorinated Polyvinyl Chloride Microfiltration Flat-sheet Membrane with respect to Immersion Time (침지시간에 따른 Chlorinated Polyvinyl Chloride 정밀여과용 평막의 내화학적 특성)

  • Ryu, Jae-Sang;Son, Jae-Ik;Kim, Hee-Jun;Chung, Kun-Yong
    • Membrane Journal
    • /
    • v.19 no.4
    • /
    • pp.324-332
    • /
    • 2009
  • This study aimed to measure chemical resistance properties of the microfiltration flat-sheet membrane made by Chlorinated Polyvinyl Chloride (CPVC) with respect to the immersed time. The solutions of effective chlorine 0.5 wt% NaClO, HCl 1 wt% and pH 4 buffer under acidic condition, NaOH 4 wt% and pH 10 buffer under alkine condition were used as widely applied chemicals for membrane washing. The CPVC membrane samples were immersed in the above chemical solutions during 1, 3, 5 and 10 days at 5, 25 and $50^{\circ}C$, respectively. After then, the tensile strength and elongation at break as the chemical durability for the samples were measured and evaluated. The tensile strength decreased within 5% at $5^{\circ}C$, but decreased up to 17% at 25 and $50^{\circ}C$ for 0.5 wt% NaClO solution mainly used for membrane cleaning. The chemical resistance of CPVC membrane was good enough for HCl 1 wt% and pH 4 buffer acid solutions, but the most vulnerable for NaOH 4 wt% solution.