• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.320-320
• /
• 2016

본 연구에서는 자연환경, 수생태환경과 관련된 모니터링자료 및 수문/수질 SWAT(Soil and Water Assessment Tool) 모델링 자료를 이용하여 유역건전성을 평가하기 위한 지수를 개발하고, 한강유역($34,148km^2$)을 대상으로 표준유역단위 유역건전성 평가를 수행하였다. 본 연구에서는 미국 EPA(Environmental Protection Agency)의 유역건전성 분석 사례를 개선하여 우리나라에 유역 특성에 맞는 통합 유역건전성 평가지수를 개발하였다. 본 연구에서 분석하고자 하는 유역건전성은 유역이 본래 가지고 있는 자연적인 건전성을 평가하고자 하는 것으로, 평가를 위한 지표로 자연토지피복, 하천환경, 수문, 수질, 서식지, 수생태 관련 요소를 각각 선정하였다. 자연토지피복 및 하천, 서식지 유역건전성 평가를 위해서 DEM, 토지이용도, 하천도, 저수지, 습지자료를 이용하였고, 수생태 유역건전성 평가를 위해서는 6년간(2008년~2013년) 모니터링 된 TDI, BMI, FAI 자료로 이용하였다. 수문/수질 유역건전성 평가를 위해서는 SWAT 모형의 장기모의 결과를 활용하였으며, 30년간(1985년-2014년) 모의된 강수량, 총유출, 지표유출, 침투, 토양수분, 중간유출, 침루, 지하수 충진, 기저유출, Sediment, T-N, T-P 결과를 이용하였다. 각 평가지표로부터 표준유역별 sub-index를 도출하였으며, 6가지 sub-index를 이용하여 통합 유역건전성 지수를 산정하였다. 산정된 지수는 0부터 1까지의 값으로 나타나며, 1에 가까울수록 유역건전성이 좋은 유역을 의미한다. 연구결과 한강유역의 통합 유역건전성은 상류에서 하류로 갈수록 건전성이 안 좋아지는 것으로 분석되었으며, 특정 표준유역에 대하여 자연환경, 수문, 수질, 수생태환경 각각의 유역건전성을 평가할 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1710-1719
• /
• 2019

This study is intended to understand defense technologies that require the convergence of various technologies and the integration of systems, and to propose valuation methods that reflect the characteristics of each field. The measure of technology level, integration (system integration technology) between technologies, preparation of manufacturing, and maturity scale of the weapons system to be valued are measured according to the items of measurement factors to verify system performance, and to present a framework for estimating the quantitative values of core technologies using system maturity. Considering the characteristics of each technology field, the research suggests a proper valuation method. In evaluating the value of defense technologies, A proposal is made to evaluate the value of defense technology by competent technical experts in each field, using SRL, which can be evaluated according to the evaluation criteria reflecting the technical characteristics of each field, and to evaluate the completion of the entire system in quantitative terms.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.51-57
• /
• 2021

This paper analyzed the effects of the concentration of nano-silica particles contained in epoxy resin on the thermomechanical properties of the composite materials. The 12nm sized nanoparticles were mixed with epoxy polymer by 5 different weight ratios for the test samples. The glass transition temperature, stress relaxation, and thermal expansion behaviors were measured using dymanic mechanical analyzer (DMA) and thermomechanical analyzer (TMA). It was shown that the nano particle mixing ratios had significant influences on the viscoelastic behaviors of the materials. As the content of the silica particles was increased, the elastic modulus was also increased, while the glass transition temperatures were decreased. Fourier Transform Infrared Spectroscopy (FTIR) results played an important role in determining the causes of the property changes by the filler contents in terms of the molecular structures, enabling the interpretations on the material behaviors based on the chemical structure changes.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.3
• /
• pp.137-142
• /
• 2021

In this study, the development of the room temperature curable silica-based coating compositions for anticorrosive and antifouling performance in marine environments was carried out. The marine (plant) structures with many exposed parts are operated in harsh marine environments such as strong ultraviolet rays, extreme temperature differences and salt water corrosion. Organic paints that are easily degraded under these environments and easily eroded by physical stimuli such as waves can not play a role properly. Dense ceramic coatings on marine structures provide careful protections even in saltwater environments due to their high hardness and rust resistance. Therefore, in the case of ceramic coatings, their use and application range in marine structures can be greatly improved due to their functional advantages. In the present study, silica-based coating compositions based on colloidal silica with silane coupling agents, curing salts, and ceramic fillers were developed, and their applications as protective coatings for corrosion protection and fouling prevention in seawater were also studied.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.9
• /
• pp.27-33
• /
• 2011

In the case of the existing method of underground pipe construction, the difficulty of the bedding compaction of pipe causes reducing the compaction efficiency and the stability of the underground facilities and conclusively damaging the structures. One of the methods to solve these problem is using the flowable fills as a backfill material. Therefore, in this study, numerical analysis of the underground pipe was performed in order to evaluate the behavior of pipe according to backfill mixtures. To estimate the deformation characteristic of the underground pipe, the displacement of the main part of the pipe, ground settlement and vertical earth pressures were measured in different backfill mixtures and maintaining the other conditions constantly. As a result of numerical analysis, using the flowable fills as the backfill material is better than using sand in reducing the ground settlement, the pipe deformation and the vertical earth pressure aspect.

• Journal of Korean Society on Water Environment
• /
• v.27 no.2
• /
• pp.167-177
• /
• 2011

Billions of barrels of briny produced water are generated in the United States every year during oil and gas production. The first step toward recovering or reusing this water is to remove the hazardous organics dissolved in the briny produced water. Biological degradation of hazardous volatile compound could be possible regardless of salinity if they were extracted from briny water. In the current work, the effectiveness of a vapor phase biofilter to degrade the gas-phase contaminants (benzene, toluene, ethylbenzene and xylenes, BTEX) extracted from briny produced water was evaluated. The performance of biofilter system responded well to short periods when the BTEX feed to the biofilter was discontinued. To challenge the system further, the biofilter was subjected to periodic spikes in inlet BTEX concentration as would be expected when it is coupled to a Surfactant-Modified Zeolite (SMZ) bed. Results of these experiments indicate that although the BTEX removal efficiency declined under these conditions, it stabilized at 75% overall removal even when the biofilter was provided with BTEX-contaminated air only 8 hours out of every 24 hours. Benzene removal was found to be the most sensitive to time varying loading conditions. A passive, granular activated carbon bed was effective at attenuating and normalizing the peak BTEX loadings during SMZ regeneration over a range of VOC loads. Field testing of a SMZ bed coupled with an activated carbon buffering/biofilter column verified that this system could be used to remove and ultimately biodegrade the dissolved BTEX constituents in briny produced water.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.13-26
• /
• 2018

This research was conducted to elucidate the removal mechanism of heavy metals and sulfate ion from acid mine drainage(AMD) by porous zeolite-slag ceramics (ZS ceramics) packed in a column reactor system. The average removal efficiencies of heavy metals and sulfate ion from AMD by the 1:3(Z:S) porous ZS ceramics in the column reactor under the HRT condition of 24 hours were Al 97.5%, As 98.8%, Cd 86.1%, Cu 96.2%, Fe 99.7%, Mn 64.1%, Pb 97.2%, Zn 66.7%, and $SO_4{^{2-}}$ 76.0% during 121 days of operation time. The XRD analysis showed that the ferric iron from AMD could be removed by adsorption and/or ion-exchange on the porous ZS ceramics. In addition it was known that Al, As, Cu, Mn, and Zn could adsorb or coprecipitate on the surface of Fe precipitates such as schwertmannite, ferrihydrite, or goethite. The EDS analysis revealed that Al, Fe, and Mn, which were of relatively high concentration in the AMD, would be adsorbed and/or ion-exchanged on the porous ZS ceramics and also exhibited that Al, Cu, Fe, Mn, and Zn could be precipitated as the form of metal hydroxide or sulfate and adsorbed or coprecipitated on the surface of Fe precipitates. The microscopic results on the porous ZS ceramics and precipitated sludge in a column reactor system suggested that the heavy metals and sulfate ion from AMD would be eliminated by the multiple mechanisms of coprecipitation, adsorption, ion-exchange as well as precipitation.

• Economic and Environmental Geology
• /
• v.54 no.3
• /
• pp.365-372
• /
• 2021

Pebble-bearing clastic carbonate rock which has been found in and around the Jeongseon and Okgye through the field survey was studied in petrological and mineralogical characteristics. We define the clastic carbonate rocks as 'Dolomite-pebble bearing fine sand-sized dolostone, or grainstone', which are characterized by the existence of dolomite single grains and Mg-phengite, and by the subsequent formation of secondary calcite cements. These attributes correspond well with those of the typical Haengmae Formation from Haengmae-dong, Mitan-myeon, Jeongseon-gun, thus the carbonate rocks in the Jeongseon and Okgye areas must belong to the Haengmae Formation. The result suggests that the Haengmae Formation is an independent unit among the Paleozoic lithostratigraphic units in Taebaek basin and lies in the upper part of Jeongseon and Sukbyungsan Formations under the Hongjeom Formation of Pyeongan Supergroup.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.413-418
• /
• 2021

In this study, as a basic study to use recycled limestone powder as a secondary product mixture for concrete, it was found that the compressive and flexural strengths were equal to or slightly improved compared to Plain up to 10% and 20% of the RLP mixing ratio, but the strength was rather decreased at 30% mixing. As a result of the heat of hydration experiment, as the RLP mixing rate increased, the heat of hydration decreased, and the elapsed time of the maximum heat was also delayed. As a result of the drying shrinkage test, as the fine powder RLP filled the internal pores of the cement mortar, the drying shrinkage decreased as the mixing rate increased. The compressive strength, water absorption rate, and compressive strength after freezing and thawing of the concrete block mixed with RLP 20% all satisfied the group standard criteria of the Korea Concrete Industry Cooperative Federation, confirming the possibility of use as a mixed material.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.59-66
• /
• 2004

The dried neeldes(1.5 kg) of Juniperus rigida were ground, extracted with acetone-H₂O(7:3, v/v), concentrated, and fractionated with a series of hexane, CH₂Cl₂, EtOAc and water on a separatory funnel. Each fraction was freeze dried to give dark-brown powder and EtOAc and water soluble fractions were chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluent. Spectrometric analysis such as NMR and FAB or EI-MS including TLC were performed to characterize the structures of the isolated compounds. The needles of Juniperus rigida contained a large amount of (+)-catechin, quercetin-3-O-α-L-rhamnopyranoside and isoconiferin, in addition to a small amount of umbelliferone and quercetin-3-O-β-D-rutinoside. The antioxidative activities of each fraction and isolated compounds were tested by DPPH radical scavenging method, and EtOAc soluble fraction, (+)-catechin and quercetin-3-O-α-L-rhamnopyranoside were effective.