• Journal of the Korean GEO-environmental Society
• /
• v.19 no.2
• /
• pp.5-12
• /
• 2018

Underground cavities could induce road subsidence, which have been frequently observed in urban areas. Therefore, adequate backfilling materials and the restoring methods of the cavities are required to prevent the road subsidence. The objective of this paper is to evaluate the suitability of backfilling methods using foaming lightweight grouting materials considering the flow values, unit weights, and air contents at slurry and expanded states, and unconfined compressive strengths. The grouting materials consist of water, cement, and foaming agent whose proportions of water, cement, and foaming agent are 25: 25: 1.0 and 25: 25: 1.2. The flow values of the two materials are greater than 200 mm, and their unconfined compressive strengths at 28 days age are smaller than 1.3 MPa. From the results, the two proportions of materials are expected to be effectively used as a backfilling material. However, the material components should be carefully mixed because poor mix of these materials could induce non-homogeneous distribution of air bubbles. The unexpectedly non-homogeneous distribution of air bubbles may induce significant cracks or additional cavities.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.10
• /
• pp.1422-1429
• /
• 2009

Alaska pollock roe is mainly used as a raw material for fermented seafood, especially in the East Asia. Kernels of Alaska pollock roe are not valuable as a raw material and usually discarded as a waste product. In order to utilize the broken roes of Alaska pollock, the smoked product, a imitated sausage, was manufactured for commercial production. Texture intensity (hardness and gumminess) and sensory evaluation (taste and acceptability) of the smoked Alaska pollock roe packed with collagen casing were evaluated based on mixture design and regression models. At higher concentration of carrageenan and lower concentration of starch in the formula of the smoked Alaska pollock roe, higher texture intensity and sensory scores were obtained. pH values of all treatments (control, vacuum and $N_2$ packages) increased up to 6.28, 6.23 and 6.24 on 4 months of storage, respectively, and then decreased. The numbers of VBN, TBA and viable cell counts increased during storage periods, higher in control than in vacuum and $N_2$ packages. Coliform bacteria was not detected in all treatment during storage periods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.90-96
• /
• 2018

Tracer experiments were carried out on two laboratory modes, "without media mode" and "with media mode", to examine the hydraulic characteristics of the anaerobic fluidized bed bioreactor (AFBR). For both configurations, a formula was derived for the hydraulics and data interpretation to obtain the actual characteristics of the reactor. The dispersion model is based on the assumption that carriers are non-reacting and the dispersion coefficient is constant. The model represents the one-dimensional unsteady-state concentration distribution of the non-reacting tracer in the reactors. The experimental results showed that the media increased the mixing conditions in the reactor considerably. For the reactor without media, in the range tested, the dispersion coefficient was at least an order of magnitude smaller than that of the reactor with media. Advective transport dominates and the flow pattern approaches the plug flow reactor (PFR) regime. The dispersion coefficient increased significantly as us, the superficial liquid velocity, was increased proportionally to 0.82cm/s. On the other hand, for the reactor with media, the flow pattern was in between a PFR and a completely mixed flow reactor (CMFR) regime, and the dispersion coefficient was saturated at us=0.41cm/s, remaining relatively constant, even at us=0.82cm/s. The dispersion coefficient depends strongly on the liquid Reynolds number (Re) or the particle Reynolds number (Rep) over the range tested.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.648-652
• /
• 2016

The study of $CO_2$ absorption in a packed column by 1,1,3,3-tetramethylguanidine (TMG) dissolved in ethylene glycol is presented. Absorption column of inner diameter 1 in and 0.6 m length was filled with Protruded-packing $0.16in{\times}0.16in$. We investigated the effect of operating conditions on overall mass transfer coefficients as well as on $CO_2$ removal efficiency. The loading values reached at about $1.0mol_{CO2}/mol_{TMG}$. In case of absorbent with lean $CO_2$ loading, the overall mass transfer coefficient was proportional to the concentration of TMG. However, in the range of more than ${\alpha}=0.5molCO_2/molTMG$, the overall mass transfer coefficients decreased with the concentration of TMG. It is due to the increasing of mass transfer resistance in liquid phase as increasing of viscosity at higher loading values.

• Membrane Journal
• /
• v.27 no.5
• /
• pp.441-448
• /
• 2017

In this study, the effects of membrane characteristics on the power generation performance in reverse electrodialysis (RED) have been investigated with pore-filled ion-exchange membranes (PFIEMs) prepared by employing a porous polyethylene substrate and the mixtures of three cross-linking agents. As a result, it was confirmed through the correlation analyses that the cross-linking degree and free volume of the PFIEMs were effectively controlled by mixing the cross-linking agents having different molecular sizes, influencing complexly the electrochemical characteristics of the membranes and the power generation performance in RED. In particular, the pore-filled cation-exchange membranes at the optimum cross-linking conditions exhibited the power generation performance superior to that of the commercial membranes and the pore-filled anion-exchange membranes also showed the excellent performance close to that of the commercial membrane.

• Membrane Journal
• /
• v.25 no.2
• /
• pp.152-161
• /
• 2015

In this study, novel pore-filled anion-exchange membranes (PFAEMs) with low electrical resistance, high permselectivity, and low water-splitting flux property under a concentration polarization condition have been developed for the enhancement in the efficiency of electrochemical water treatment processes. The base membranes have been prepared by filling a copolymer containing quaternary ammonium groups with an excellent ion-exchange capability into a porous polyolefin substrate, showing a high performance superior to that of a commercial membrane. In addition, it was confirmed that the electrochemical membrane performances are preserved while the water-splitting flux is effectively controlled by coating an imidazolium polymer onto the surface of the base membrane. The prepared PFAEMs revealed remarkably low electrical resistances of about 1/6~1/8 compared to those of a commercial membrane, and simultaneously low water-splitting flux comparable with that of cation-exchange membranes under a concentration polarization condition.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.129-134
• /
• 2005

Electroplating copper is the important role in formation of 3D stacking interconnection in SiP (System in Package). The I-V characteristics curves are investigated at different electrolyte conditions. Inhibitor and accelerator are used simultaneously to investigate the effects of additives. Three different sizes of via are tested. All via were prepared with RIE (reactive ion etching) method. Via's diameter are 50, 75, $100{\mu}m$ and the height is $100{\mu}m$. Inside via, Ta was deposited for diffusion barrier and Cu was deposited fer seed layer using magnetron sputtering method. DC, pulse and pulse revere current are used in this study. With DC, via cannot be filled without defects. Pulse plating can improve the filling patterns however it cannot completely filled copper without defects. Via was filled completely without defects using pulse-reverse electroplating method.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.60-65
• /
• 2003

Semi-Rigid 폴리우레탄 foam의 한 종류인 PIR(Polyisocyanurate) foam은 당량적으로 과량의 MDI가 투입되어 생성된 Isocyanate Trimer(Isocyanurate)가 높은 Char Formation을 형성, 우수한 난연특성, 낮은 SMOKE INDEX, 높은 OXYGEN INDEX를 나타낸다. 국내엔 1988년 단열재용 폴리우레탄 foam으로는 최초로 미국의 UL Mark를 획득하여 건설, 건축등 관련업계에서 요구하는 난연특성 및 단열제로서의 제반요건에 부응하며 꾸준히 연구 개발되어 왔다.(중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.28-28
• /
• 2000

HTPB/AP/AI 추진제는 none-reinforcing filler가 다량 함유되어 있어 기계적 특성은 바인더와 고체 충진제의 계면 접착력에 따라 크게 영향을 받으며 이를 향상시키기 위해 결합제의 연구가 다수 진행되었고 추진제의 인장 변형율을 증가시키기 위해 HTPB의 관능기수에 따른 가교밀도, 경화제와 경화촉매, 가소제등 최적의 바인더조성을 위해 가능한 원료 및 함량 연구에 많은 노력을 기울여 왔다. 또한 추진제의 주원료로서 AP는 추진제의 성능 및 내탄도 관점에서 입자크기에 따른 연소특성 및 고성능을 위한 충전 분율에 대해 주로 연구되었으며 특히 Oberth와 Farris는 고체추진제 분야에서 많은 업적을 이루었다.(중략)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.261-261
• /
• 2009

층상실리케이트 나노입자를 포함한 에폭시수지인 나노콤포지트를 장시간 트리절연내력을 평가하기 위하여 제조하였다. 층살실리케이트를 포함하지 않은 경우보다 월등하게 긴 트리잉파괴 시간을 나타내었다. 더욱이 층상실리케이트 나노입자와 에폭시수지 계면의 효과를 연구하기위해 silane coupling agent을 나노입자에 표면처리하여 장시간 트리잉 파괴에 초점을 맞추었다. 에폭시수지와 층상실리케이트 나노입자사이 커플링 의한 계면결합은 단시간 절연파괴강도와 장시간 트리잉파괴 시간에 중요한 역할을 하고 있음을 알았다. 그 결과는 침선단에 교류 전계강도가 781.42kV/mm(교류 15kV, 침선단 곡률반경 $5{\mu}m$) 절연파괴시간을 측정한 결과 나노입자가 충진된 경우 트리개시시간이 24,726분이었고, 파괴에 이르는 시간은 29,213분이 걸렸다. 반면에 실란을 처리하지 않은 경우 파괴시간은 11,591분 이었다. 충진된 층살실리케이트 나노입자의 함량은 3wt%로 하였으며, 이와같은 파괴시간 지연 결과의 향상이 152%향상된 결과는 계면의 결합력이 크게 향상되어 나타낸 경우로 사료된다.