• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.690-691
• /
• 2009

This study intends to discuss the Charge and Discharge Monitoring System for HEV. Study is aim to charge and discharge stability and efficient. This study is include hardware module and application software development. It is possible to maintain charge and discharge performance efficiently.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.494-495
• /
• 2011

초고용량의 커패시터는 신재생 에너지 이용의 증가와 더불어 이용 영역이 점차 넓어지고 있어 유망신규시장의 창출이 기대된다. 따라서, 슈퍼커패시터의 성능을 측정하여 시험할 수 있는 충방전 순환 시험기가 필수적이라 할 수 있다. 이를 위해 슈퍼커패시터의 기본 충/방전 특성을 기준으로, 충전과 방전시의 고속계측이 가능하도록 용량 및 내부저항 측정을 위한 회로와 전압유지특성을 측정하기 위한 회로를 설계하였다. 5V, 100A Proto-type의 충방전 시험 시스템 구축으로 특성 평가결과, 전압 및 전류 측정 정밀도 ${\pm}$ 0.1%이내로 확인하였고, 데이터 모니터링 및 로깅을 위한 프로그램을 제작하였다. 또한 전체시스템 구성과 실험결과를 통해, 본 연구에서 개발하고자 하는 슈퍼커패시터용 충방전 시험 시스템이 실제 응용 가능함을 확인하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.157-161
• /
• 2010

Most of air pollution in a metropolis is the result of exhaust gas emissions from automotive vehicles, and the world-wide regulation against environmental pollution is becoming more strict. Moreover the demand on development and supply of an environment-friendly automobile is increasing and the market share about that is expected to grow rapidly in this time of high oil price. The secondary batteries the most important component to store the electrical energy in hybrid electric vehicle. It needs to the higher power characteristics to emit the energy instantaneous. In this paper, we proposed the system to monitor reliably the charge and discharge states of the secondary batteries for hybrid electric vehicle. The material is about SW and HW module the software and hardware module mounted on the charge and discharge system and the monitoring system to control the charge and discharge performance effectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.387-396
• /
• 2009

The life and performance of lithium battery are greatly influenced by the formation process which is essential in the process of manufacture. Charge/discharge system for the lithium battery are required for the formation process. To simulate such a system in a conventional method takes very long time and requires huge memory space to save data files. So the simulation may be impossible with a general-purpose PC. In this paper, the lithium battery is modelled to a resistor-capacitor serial circuit and the lithium battery charge/discharge system is analyzed and simulated by using state space averaging method. As a result, the simulation time is reduced dramatically and the simulation of the lithium battery charge/discharge system becomes possible on a general-purpose PC within 3 hours. Also, both the charge/discharge characteristics and the time required to charge/discharge of the lithium battery charge/discharge system can be observed. To verify the propriety of resistor-capacitor serial circuit modeling method for lithium battery and the validity of the analysis and simulation based on state space averaging, the lithium battery charge/discharge system is composed and experimentations are carried out.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.551-557
• /
• 2021

With increase of electric vehicle in the road, the number of charging/discharging infrastructure for electric vehicle in public space is also increased rapidly. To charge or discharge the electric vehicle the user of electric vehicle and service provider should verify the each other's identity to minimize security vulnerability. This paper proposes mutual authentication scheme between electric vehicle and charging/discharging service provider with help of hash function and Message Authentication Code(MAC). Also efficient operating scheme for charging/discharging service system is proposed. The analysis shows that the system has robustness against security vulnerability. Also this system can keep the sensitive personal information of service user safely.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.639-642
• /
• 2014

If the power of the general is not supplied, Visual aids utilize solar power system. The power supply system of these, the role of the power regulator to manage the charging and discharging is very important. In recent years, by introducing the IT technology for the effective management of visual aids, it was supposed to add a device that uses the power consumption. Thus, the importance of power regulator has increased. Currently, the power regulator is installed inside the AtoN, if the accessibility is not ensured, there is a difficulty that can not be checked. In order to solve these problems, in this paper, you have installed the Blue-tooth module to the power regulator. Also, by using the Blue-tooth communication function of a smart phone, a radio check has implemented a possible monitoring system. Advantage of the system implemented is a simple configuration and low installation cost. Also, it is possible to check the state information of the real-time power supply regulator. In addition, it has the effect of preventing accidents and reducing costs of inspection.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.4
• /
• pp.395-402
• /
• 2016

When the operation of battery is converted at charging and discharging system based on a DC micro grid, the voltage is fluctuated. And excessive voltage fluctuation could cause damage or failure of charging and discharging equipment. Therefore, in this paper, we studied the operating schedule of the charging and discharging system based on the DC micro grid and a design point of the capacitor which was able to reduce the voltage fluctuation. A result of computer simulation showed that when a fluctuation-reducing capacitor which had an initial value of 600V/35mF was applied at the charging and discharging system based on a DC micro grid which was operated with three charging battery sets and five discharging battery sets, voltage fluctuation by charging and discharging operation was reduced by about 63.3%. Furthermore, voltage fluctuation which occurred when initial network voltage was stabilized was reduced by about 73%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.933-939
• /
• 2015

If the Visual Aids(light wave signs) is not supplied the general power it is using solar power system. These power supply systems, the role of the charge/discharge control is very important. Introduction of IT(AIS etc.) for the effective management of the AtoN(Aids to Navigation) is a Visual Aids has been added to the device using the power to charge/discharge control, the need increases. The current charge/discharge controller is attached to the inside of the AtoN and checks on and verification of the maritime environment, depending on the difficulty. In order to resolve these issues in this paper, the Bluetooth module is mounted on the inside of the charge/discharge controller and proposed a possible system monitoring at close range. Advantage of the system implemented is a simple configuration and low installation cost. In addition, it can be applied to a variety of AtoN. Also, it has been able to check the real-time status information of the charge/discharge controller at a short distance in to reduce inspection costs, and reduce risk factors that might occur during check.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.459-460
• /
• 2013

본 논문에서는 전기 자동차와 계통의 양방향 충-방전 동작이 가능한 완속 충-방전 시스템과 차량 전장용 에너지 공급을 위한 LDC용 보조 배터리를 충전시키는 시스템을 Select Switch의 설정에 따라 선택적으로 운용 할 수 있는 두 가지 기능을 갖는 하이브리드 충-방전 시스템을 제안한다. 제안하는 시스템은 계통과 메인 배터리의 양방향 충-방전 동작과 메인 배터리에서 보조 배터리로 에너지 전달을 하는 동작을 수행하며, DC-link와 메인 배터리와의 에너지 전달을 모두 Interleaved 방식으로 동작시킴으로써 전기 에너지의 활용도를 높일 수 있다. PSIM 컴퓨터 시뮬레이션으로 본 논문의 타당성을 검증하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1128_1129
• /
• 2009

본 논문에서는 Ni-MH전지를 가로등용 독립형 태양광발전시스템의 전력저장장치로 적용하고 충방전제어기를 설계하고 시스템을 구성하여 운전특성을 분석하였다. 태양전지모듈은 170W Sanyo사의 HIP-170N1을 사용하였고 전력저장장치는 Ni-MH 전지를 적용하였으며 부하인 가로등용 램프로는 24V, 45W 삼파장 램프를 사용하여 가로등용 독립형 태양광발전 시스템을 구성하였다. 또한 충방전 제어기를 구성하여 Ni-MH 전지의 충방전 특성을 분석하였다. Ni-MH 전지의 충방전 전압은 27V 좌우로 안정적으로 충방전이 되고 있음을 알 수 있었으며 축전지의 온도 상승도 15시 이후에 최고 $35^{\circ}C$로 나타났다. 이는 Ni-MH전지에 적용한 충전 시스템이 온도에 의하여 충전 말기 전압을 제어하기 때문으로써 축전지의 과충전 현상을 방지하여 축전지의 수명을 증가할 수 있을 것으로 판단되어진다.