• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.136-138
• /
• 2005

무선 브로드캐스트 환경에서는 모바일 클라이언트의 제한된 배터리와 클라이언트에서 서버로의 제한된 상향 대역폭 등의 문제로 기존의 동시성 제어 기법을 그대로 사용할 수 없다. 이런 문제를 해결하고자 많은 동시성 제어 기법들이 연구되어 왔는데, 지금까지 제안된 기법들은 편향된 데이터의 접근 패턴을 반영한 브로드캐스트 환경을 고려하지 못하고 있다. 무선 브로드캐스트 환경에서 서버는 일반적으로 모바일 클라이언트의 접근 패턴을 고려하여 편향된 접근 빈도를 갖는 데이터 아이템을 브로드캐스트 한다. 본 논문에서는 무선 브로드캐스트 환경에서 편향된 데이터 접근 패턴을 고려한 동시성 제어 기법을 제안한다. 제안하는 기법은 브로드캐스트 디스크 모델에서 전체 메이저 브로드캐스트 주기마다. 모바일 트랜잭션을 위한 제어 정보를 보내는 것이 아니라 일정한 마이너 브로드캐스트 주기마다. 제어 정보를 전송한다. 이는 접근 빈도가 놓은 데이터가 갱신된 경우 갱신된 내용을 마이너 그룹마다 반영하므로 읽기 전용 트랜잭션이 접근하는 데이터가 최신 정보임을 보장할 뿐만 아니라 갱신 트랜잭션이 최종 검증을 위해서 상향 통신 대역폭을 이용하는 횟수를 줄이고, 보다. 빠른 재실행을 통해 모바일 트랜잭션의 평균 응답시간을 줄여줄 수 있다. 또한 모바일 트랜잭션의 요청이 편향된 경우, 반복적인 트랜잭션의 중단, 재실행으로 인한 성능 저하를 개선하고자 정적 백오프 기법을 이용하여 모바일 트랜잭션 간 충돌 가능성을 줄여준다. 마지막으로 시뮬레이션을 통해 기존의 기법들에 비해 평균 접근 시간, 상향 통신 대역폭 등의 사용량이 현저히 줄어드는 것을 보임으로써 제안하는 기법의 성능을 검증한다.한 평균 access time을 최소화하는 동시에 클라이언트들의 제한된 에너지 소비를 최소화하는데 목적이 있다. 제안기법에 대한 평가는 수학적 분석을 통해 HIDAF 기법과 기존의 브로드캐스트 기법의 성능을 비교 분석한다.하였으나 사료효율은 증진시켰으며, 후자(사양, 사료)와의 상호작용은 나타나지 않았다. 이상의 결과는 거세비육돈에서 1) androgen과 estrogen은 공히 자발적인 사료섭취와 등지방 침적을 억제하고 IGF-I 분비를 증가시키며, 2) 성선스테로이드호르몬의 이 같은 성장에 미치는 효과의 일부는 IGF-I을 통해 매개될 수도 있을을 시사한다. 약 $70 {\~} 90\%$의 phenoxyethanol이 유상에 존재하였다. 또한, 미생물에 대한 항균력도 phenoxyethanol이 수상에 많이 존재할수록 증가하는 경향을 나타내었다. 따라서, 제형 내 oil tomposition을 변화시킴으로써 phenoxyethanol의 사용량을 줄일 수 있을 뿐만 아니라, 피부 투과를 감소시켜 보다 피부 자극이 적은 저자극 방부시스템 개발이 가능하리라 보여 진다. 첨가하여 제조한 curd yoghurt는 저장성과 관능적인 면에서 우수한 상품적 가치가 인정되는 새로운 기능성 신제품의 개발에 기여할 수 있을 것으로 사료되었다. 여자의 경우 0.8이상이 되어서 심혈관계 질환의 위험 범위에 속하는 수준이었다. 삼두근의 두겹 두께는 남녀 각각 $20.2\pm8.58cm,\;22.2\pm4.40mm$으로 남녀간에 유의한 차이는 없었다. 조사대상자의 식습관 상태는 전체 대상자의 $84.4\%$가 대부분

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.8
• /
• pp.857-863
• /
• 2014

In determining interaction between plasma and electromagnetic wave, plasma frequency and collision frequency are two key parameters. They are derived from electron density and temperature, which vary in an extremely wide range, depending on a plasma generator. Because the parameters are usually unknown, traditional researches have utilized simplified electron density model and constant electron temperature approximation. Introduction of plasma fluid model to electromagnetics is suggested to utilize relatively precise time dependent variables for given generator. Dielectric barrier discharge(DBD) generator is selected due to its simple geometry which allows us to use one dimensional analysis. Time dependent property is analyzed when microwave is launched toward parallel plate DBD plasma. Afterwards, attenuation tendency with the change of electron density and temperature is demonstrated.

• Journal of Korea Multimedia Society
• /
• v.12 no.2
• /
• pp.323-328
• /
• 2009

Natural Phenomena are simulated to make computer users feel verisimilitude and be immersed in games or virtual reality. The important factor in simulating fluid such as water or sea using 3D rendering technology in games or virtual reality is real-time interaction and reality. There are many difficulties in simulating fluid models because it is controlled by many equations of each specific situation and many parameter values. In addition, it needs a lot of time in processing physically-based simulation. In this paper, I suggest simplified fluid-surface model in order to represent interaction between rigid body and fluid, and it can make faster simulation by improved processing. Also, I show movement of fluid surface which is come from collision of rigid body caused by reaction of fluid in representing interaction between rigid body and fluid surface. This natural fluid-surface model suggested in this paper is represented realistically in real-time using fluid dynamics veri similarly. And the fluid-surface model will be applicable in games or animation by realizing it for PC environment to interact with this.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.587-595
• /
• 2015

A by-pass path in wireless sensor networks is the alternative path which be able to forward data when a routing path is being broken. One reason of depleting energy is occurred by the path. The method for solving prior to addressed the problem is proposed. However, this method may deplete radio resource. The best path has advantage that network lifetime of sensor nodes is prolonged; on the contrary, in order to maintain the best path it have to share their information between the entire nodes. In this paper, we propose the best path searching algorithm in the distributed three dimensional sensor networks. Through the neighboring informations sharing in the proposed method, the proposed algorithm can decide the best k-path as well as the extension of network lifetime.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1931-1938
• /
• 2012

A by-pass path in wireless sensor networks is the alternative path which be able to forward data when a routing path is being broken. One reason of depleting energy is occurred by the path. The method for solving prior to addressed the problem is proposed. However, this method may deplete radio resource. The best path has advantage that network lifetime of sensor nodes is prolonged; on the contrary, in order to maintain the best path it have to share their information between the entire nodes. In this paper, we propose the best path searching algorithm in the distributed three dimensional sensor networks. Through the neighboring informations sharing in the proposed method, the proposed algorithm can decide the best k-path as well as the extension of network lifetime.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.136-144
• /
• 2003

In this paper, we propose a scheme that can control the loss probability of low priority class bursts by dynamically adjusting the assembly threshold of low priority class. The key ideas is that the loss Probability of the longer burst increases as the load increases, thus reduced low priority class burst length decreases the loss priority at high traffic load. To achieve this aim, we first derive the relation among the loss probability, the assembly threshold, and the traffic load. In this paper we derive the relation by curve fitting on the simulation results. The ingress edge routers periodically or by event-driven receives the proper corresponding assembly threshold information from the core routers. This assembly threshold is calculated from the derived relation so that the required loss probability of the low priority class bursts in the network is satisfied. The simulation results show that the proposed scheme performs well to meet the loss probability target as expected.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.661-666
• /
• 2005

Recent warnings indicate that there is a potential risk of massive earthquake. These earthquakes could produce large-scale tsunamis. Consideration of the effect of Tsunami to the moored ship is very important bemuse it brings the loss of life and vast property damage in a viewpoint of ship operations within a harbor. If a tsunami occurs, a ship in a harbor may begin drifting in case of ship entering and departing harbor, and breakage of mooring rope and drifting of moored ship are happened. And extremely serious accident, such as stranding and collision to a quay, might occur. On the other hand, since the tsunami consists of approximately component waves of several minutes, there is a possibility of resonance with the long period motion of mooring vessel. As the speed of Tsunami is much faster than tidal current in a harbor, a strong resisting force might act on the moored ships. In this paper, the numerical simulation procedure in the matter of ship motions due to the attack of large-scale tsunamis are investigated and the effects on the ship motions and mooring loads are evaluated by numerical simulation.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.289-301
• /
• 2018

IIoT, the IoT technology applied to the industrial field, is being used as a monitoring technology for increasing in production rate and safety of workers. However, monitoring through the construction of IIoT network using Ethernet and RS485 in production lines where dozens to hundreds of machine tools are manufacturing components, have difficulties of infrastructure cost and network flexibility and fluidity. Therefore, in this paper, using IEEE 802.15.4 standard WSN device to construct a Ad-Hoc WSN in the production line. In addition, the transmission period and order of the sensor nodes are set by applying the EtherCAT communication method in which the payload frames are shared by all the sensor nodes. From this, we have overcome the problem of reliability decline and real-time issue due to the packet collision of wireless network and confirmed that it is a wireless network routing method that can be used in the actual industrial field.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.3-11
• /
• 2016

Vehicle to Everything (V2X) communication has been growing to enhance traffic safety by employing advanced wireless communication systems. V2X communication is one core solution for governing and advancing future traffic safety and mobility. In this paper, we design the system level simulator (SLS) of Long Term Evolution (LTE)-based V2X and propose the adaptive transmission scheme for vehicle communication. The proposed scheme allocates the resource randomly in time and frequency domain, and transmit the message according to probability of transmission. The performance analysis is based on freeway case in periodic message transmission. Simulation results show that proposed scheme can improve the cumulative distribution function (CDF) of packet reception ratio (PRR) and average PRR.

• Economic and Environmental Geology
• /
• v.13 no.1
• /
• pp.51-63
• /
• 1980

The seismicity of the Korean Peninsula and its vicinity is investigated temporally (2 A. D. to 1978) and spatially to evaluate the seismic risk and to understand the neotectonics around the peninsula. The study has been conducted using macrocosmic data obtained from historical literature, and instrumental records recorded by the Worldwide Network of Standardized Seismographs(WWNSS). The seismicity of the peninsula was active from the 13th through the 17th centuries. A seismic quiescence began at the onset of the 18th century, and has continued for the last 200 years. Presently, the seismicity region is found to be active again. The return periods are determined by a statistical method based upon the cumulative magnitude recurrence. They indicate that the seismic risk is greater in the south or west than in the north or east of the peninsula. Focal mechanism solutions demonstrate that the neotectonic stress distribution in the Japan Sea is greatly influenced by the subduction of the Pacific Plate under the Eurasian Plate or the Philippine Sea Plate, even though the predominate local paleotectonics is controlled by the spreading of the earth's crut.