• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.393-400
• /
• 2014

Structures are often subject to vehicle collision which can be accidental or terrorist attack. Previous research shows that the damage in major columns may result in progressive collapse of a whole building. This study investigates the performance of a steel column standing on a reinforced concrete footing subjected to a vehicle collision. The size and the axial load of the steel column are determined based on the assumption that it is the first story corner column in a typical three-story building with six meter span length. The finite element model of a eight-ton single unit truck provided by the NCAC (National Crash Analysis Center) is used in the numerical analysis. The finite element analysis is performed using the LS-DYNA, and the results show that the behavior of the column subjected to car impact depends largely on the column-foundation connection detail.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.176-190
• /
• 2019

The prevention of pedestrian accidents in crosswalks and intersections is very important. The C-ITS services provide a warning service for preventing accidents between cars and pedestrians. In the current pedestrian collision prevention warning service according to the C-ITS standard, however, it is difficult to provide real-time service because it detects pedestrians from a video-analysis server in the control center and sends service messages through the ITS system. This paper proposes a pedestrian collision-prevention warning system that detects pedestrians in the local field using an edge camera and sends a warning message directly to the driver through a roadside unit. An evaluation showed that the proposed system could deliver the pedestrian collision prevention-warning message to the driver satisfying the delay time within the 300 ms required by the C-ITS standard, even in the worst case.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.123-130
• /
• 2013

Many countries tried to design the collision risk management system to protect their own satellites from collision probability due to the space debris. In this situation, KARI(Korea Aerospace Research Institute) is developing the KARISMA(KARI Conjunction Risk Management System) to protect our operating satellites from these space debris. The quality of this system is depending on the accuracy of orbit determination for the space debris which has collision risk. Therefore, this system must treat many kinds of measurement data types to estimate the orbit of space debris. In this paper, to handle the radar observation data widely used for these space debris, the orbit determination system was applied with simulated radar tracking data for the KOMSAT-2 which has precise orbit determination data.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.137-143
• /
• 2009

It is necessary to develop driving assistant information in order to prevent a rear-end collision with a crashed car which is at the blind curve on highway. Laboratory experiments were performed using a driving simulator to keep the traffic environment constant. This research was evaluated the effect of driver behavior according to providing collision avoidance information which was consisted of advisory, caution, and warning information by the dangerous degree of traffic situation. Driver behavior was evaluated to analyze the collision avoidance with a crashed car, and glance behavior was examined to measure the eye movements to the display on which provided the collision avoidance information. After experiment, the significance was evaluated on provided collision avoidance information. As the result of this research, the number of collision accident is reduced when the phased information was provided. In addition, it is clear that auditory information is more important than visual information in the case of providing the second information.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1097-1103
• /
• 2011

Liquid droplet impingement erosion (LDIE) is caused by the impact of high-velocity droplets entrained in steam or air on metal. The degradation caused by the LDIE has been experienced in steam turbine internals and high-velocity airplane components (particularly canopies). Recently, LDIE has also been observed in the pipelines of nuclear plants. LDIE among the pipelines occurs when two-phase steam experiences a high pressure drop (e.g., across an orifice in a line to the condenser). In 2011, a nuclear power plant in Korea experienced a steam leak caused by LDIE in a pipe through which a two-phase fluid was flowing. This paper describes a study on the design change of a pipe affected by LDIE in order to mitigate the damage. The design change has been reviewed in terms of fluid dynamics by using the FLUENT code.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.91-100
• /
• 2007

The most important thing for driver's safety on the road is equipment of crash cushion as a vehicle protection safety facility. But development of crash cushion is defective because there's no rational and reality way of design. And also without an alternative plan, it rely on crash test hereby it suffers a great economic loss and wastes time. This study that uses data of cash test proves the suitability of single degree of freedom which considers the safety of passengers about three-dimensional complicated Crash Analysis. As the study analyzes the conduct of crash cushion, it want to develop the effective method of design on Single Degree of Freedom Crash Cushion. And it presents the way of crash cushion design through making a crash analysis model with single degree of freedom. To verify the validness of the crash cushion plan, with single degree of freedom plan, we make the level CC2 crash cushion and execute the crash test. A performance test brings satisfied result and a plan of single degree of freedom crash cushion is proven as an one of the way to be a good system which can design crash cushion.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.999-1005
• /
• 2008

RFID(Radio Frequency IDintification) leader is collision of data, when recognizing the multiple tag the inside area. This collision became the cause which delays the tag recognition time of the leader. The protocol which prevents the delay of tag recognition time of the leader the place where representative it uses QT(Query Tree) algorithms, it uses a collision bit position from this paper and are improved QT-MTC(Query Tree with Multi-Tag Cognition) algorithms which it proposes. This algorithm stored the bit position which bit possibility and the collision where the collision happens occurs in the stack and goes round a tree the number of time which, it reduced could be identified two tags simultaneously in order, it was planned. A result of performance analysis, It compared in QT protocols and the this algorithm against the tag bit which is continued a high efficiency improvement effect was visible.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.238-246
• /
• 2021

Collision of small vessels such as fishing boats cause great personal injury. Prior to this study, the collision prevention algorithm was developed to assess the collision risk and make the collision alarm. However, a service provided for safety, such as a collision warning, not only prevents risks, but also requires a certain degree of user satisfaction to function effectively. In this study, the collision prevention algorithm for small vessels was improved to be more practical, and the effects of the improvement were confirmed by applying the algorithm. A survey conducted on the users of the collision warning service confirmed the user requirements for improving the accuracy of the collision warning system and reducing the volume and number of alarms. Accordingly, the algorithm was improved for user satisfaction, and the actual vessel experiment was performed applying the improved algorithm in an actual maritime environment. As a result, the frequency of alarm occurrence decreased compared to former algorithm, but the alarm was relatively steadily generated in dangerous situations. It was analyzed that the accuracy and practicality of the collision alarm were improved. If the practicality and reliability of the improved algorithm are verified in the further study, it will be able to effectively contribute to the prevention of collisions of small vessels.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.92-92
• /
• 2016

전기방전의 기본적인 특성을 가지고 있는 플라즈마를 이용하여 재료를 가공하는 증착, 식각, 표면처리 공정에 있어서 플라즈마 내의 전자 충돌 반응에 의한 이온, 라디칼의 생성과 재료 표면의 반응을 분석하는 도구로써 분압 측정은 일반적인 화학 조성 분석에 기원한 오랜 역사를 가지고 있다. 1 amu 정도의 분해능을 가지고 있고 크기가 30 cm 정도에 불과한 사중극자 질량 분석기는 적절한 질량 스캔 시간과 넓은 이온 전류 측정 범위를 가지므로 소형 차등 배기 시스템과 조합하면 1 mTorr 영역의 스퍼터링 시스템에서 1 Torr 영역의 PECVD/PEALD 시스템 진단에도 쉽게 적용이 가능하다. Inficon사의 CPM-300과 Pfeiffer사의 Prisma80을 이용한 플라즈마 식각 공정 분석 결과를 보면 동위원소까지 분석이 가능하다. 또한 전자충돌 이온화 에너지를 조절하여 m/q(질량전하비율)가 중첩되는 경우의 해석도 가능하다. 다중 오리피스를 갖는 compact design의 밸브 블록을 이용한 설계에서는 line-of-sight 입사가 불가능하여 이온 전류를 분석할 수 없다는 단점이 있으나 표준 가스를 이용한 정량화 등의 큰 장점들이 있다. 최근 이루어진 연구의 내용으로는 유도 결합 플라즈마 장치에서 전도성 메쉬를 이용한 라디칼 거동 관찰을 위해서 두 대의 CPM-300을 메쉬 전 후에 설치하여 라디칼의 양 변화를 전류 프로브와 같이 사용하여 조사하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.186-186
• /
• 1999

시뮬레이션 모델 및 AES, SIMS에 의한 깊이방향 분석의 유용성을 확인하기 위해 이체 충돌모델에 기초한 몬테칼로 시뮬레이션을 수행하였다. 이를 위해, 현 시뮬레이션에서는 충돌 캐스캐이드에 의한 interstitial 및 vacancy 원자의 발생과 각 원자 층이 일정한 원자농도를 유지하도록 interstitial에 의한 vacancy의 소멸을 고려하였다. 이 모델은 AES 깊이 방향 분석에서는 AsAs/GaAs 초격자에, SIMS 깊이 방향 분석에는 Ta2O5/SiO2 초격자에 적용되었고, 실험으로부터 얻어진 결과들을 잘 나타냈다. 0.5keV Ar+ 이온 스퍼터링에 의한 AES 깊이방향 분석의 경우 AlAs 층에서 Al의 선택 스퍼터링에 의해 AlAs 층에서 As(MVV-32eV)의 Auger 강도는 GaAs 층에서보다 약 1.2배 크게 나타났다. 이 시뮬레이션은 Ta2O5(18nm)/SiO2(0.5nm)에 대한 SIMS 깊이방향 분석에서 표면 쪽으로의 1-3nm 정도의 피크(SiO+) 이동 및 decay length도 또한 잘 설명할 수 있었다. 이때, 낮은 에너지에서 보다 더 깊은 이온빔 믹싱이 발생하기 때문에 높은 에너지에서 오히려 더 좋은 분해능을 얻을 수 있었다.