• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.311-320
• /
• 1997

사회가 발달함에 따라 교통사고 등에 의한 외상 환자는 20 -30 년전에 비해 기하급수적으로 증가 하고 있으며 그러한 외상 중에 경추부 상해의 빈도는 매우 높다. 경추부 상해 원인을 규명하기 위한 임상학적 시도는 한계성을 지니고 있다. 본 논문에서는 실제 경추부 형상을 바탕으로 근육과 인대 등 을 비선형 스프링, 댐퍼 등으로 수치 모델링하여 후면 충돌시 경추부의 거동과 경추부에 미치는 상해를 구현하였다. 이를 이용하여 편타성 상해와 에어백으로 인한 경추부 골절의 생리학적 원인을 분석하고 자 한다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.157-167
• /
• 2011

Although vehicles become more intelligent for convenience and safety of drivers, traffic accidents are increased more and more. Especially, car-to-car single rear impacts in the urban area are increased rapidly because of driver inattention. To prevent rear impacts in the urban area, commercial automobile vendor applies the low-speed short-distance collision warning system. This paper presents low-speed short-distance collision warning algorithm for the city driving by using sensor fusion of laser sensor and ultrasonic sensor. An experiment using embedded microprocessor in the driving track was used to demonstrate the feasibility of the collision warning algorithm.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.253-262
• /
• 2006

In this paper, collision analysis is carried out between two FRP fishing boats. A computer simulation with finite element method is used to accomplish this objective. At first, a detailed geometric model of the boat is constructed using 3-D CAD program. The formation of a finite element from a geometric data of the boats is carried out using HYPERMESH that is the commercial software for mesh generation and post processing. Twelve collision configurations are established by combining two kinds of contact angle($90^{\circ},\;135^{\circ}$) and three different speed(5, 10, 15knot) for small and large boats. Collision analysis is accomplished using DYNA3D. Stress distribution and deformation shape are investigated for each collision condition. In general, $90^{\circ}$ collision angle generate larger stress than $135^{\circ}$ case and the collision for two moving boats showed larger maximum stress than the case that one is moving and the other is stationary. When analysis is carried out until 150ms contact parts of two boats are broken for 10 and 15knot collision speed, in which maximum stress is larger than ultimate strength of the material.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.69-77
• /
• 2007

This study presents comparison results for pedestrian accident reconstruction models representing the relationship between collision speed and horizontal distance that a body travels while falling and sliding. A set of 49 reliable pedestrian accident cases are applied to compare the existing reconstruction models. In addition, the authors investigate the effects of a set of parameters associated with the effects of the frontal shape of a vehicle on the horizontal distance a pedestrian travels while falling and sliding. It has been revealed that the length of the bumper is the most dominant factor to affect the horizontal distance of pedestrian travel after collision. Further analyses utilizing more accident data need to conducted to develop a more accurate and reliable reconstruction model.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.6
• /
• pp.852-859
• /
• 2000

The emission in the exhaust gas from diesel engine is effected by the fuel spray characteristics. The spray of D.I. diesel engine impinges on a piston cavity and a cylinder wall. It is very important to know exactly the distribution and behavior of the spray inside cylinder. The objective of this study is to develop more accurate evaporation model. The EPISO code was used to analyze the flow characteristics in the engine. The Wakil model and the Faeth model are applied to the EPISO code to analyze the behavior of impinging spray. And also experimental and numerical analysis were carried out. The spray behavior characteristics were investigated by changing injection pressure, ambient pressure and temperature. The behavior of impinging spray was strongly effected by the change of ambient pressure and temperature. The effects of evaporation and rebounding droplet should be considered.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.11
• /
• pp.1625-1634
• /
• 1998

The objective of this study is to establish geometric guidelines for design of impaction parts prepared for removing undesirable effects of fuel deposition on a wall in small direct-injection diesel engines. In order to get the guidelines a new wall geometry is introduced and assessed, which has a flat top and a slant edge. The size of the flat top and the angle of the slant edge are varied and tested in same chamber condition, then their effects on spray dispersions and drop sizes are discussed. The results show that the case of 3.0mm flat top and $60^{\circ}$ edge angle gives the best spray characteristics for a small combustion chamber in the test conditions chosen in this paper.

• Journal of Korean Port Research
• /
• v.14 no.2
• /
• pp.219-231
• /
• 2000

In this paper a complicated structural behavior in collision and its effects of energy translation to the collision bulkhead was examined through a methodology of the numerical simulation to obtain a ideal bow construction and a location of collision bulkhead against head on collision. In the present the bow structure is normally designed in consideration of its specific structural arrangements and internal and external loads in these area such as hydrostatic and dynamic pressure, wave impact and bottom slamming in accordance with the Classification rules, and the specific location of collision bulkhead by SOLAS requirement. By these studies the behavior of the bow collapse due to collision was synthetically evaluated for the different size of tankers and its operational speed limits, and by the results of these simulation it provides the optimal design concept for the bow construction to prevent the subsequent plastic deformation onto or near to the collision bulkhead boundary and to determine the rational location of collision bulkhead.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04a
• /
• pp.350-352
• /
• 2003

일반적인 접근제어 모델이 메커니즘 내에 보안 정책을 미리 설계함에 따라 보안 요구사항의 추가나 변경에 어려움이 있는 반면에, 다중 접근제어 정책 모델은 기업 환경에 필요한 다양한 보안 정책들을 융통성 있게 지원하기 위해, 권한 명세 언어를 기반으로 positive/negative 권한을 모두 표현할 뿐만 아니라, 권한의 예외적 수행, 권한의 전파와 충돌 해결 정책 등을 구현함으로써, 접근제어의 권한 적용에 유연성을 강화하였다. 그러나, 기존의 권한 전파 및 충돌 해결 정책은 권한 전파의 모든 가능한 path를 고려하지 않거나, 충돌 문제를 해결하지 않는 부분이 있는데, 이것은 특히 서로 다른 정책의 어플리케이션 통합 환경에서 권한의 남용이나 상실 등 의도하지 않은 부당한 권한의 실행을 야기시킨다. 따라서, 본 논문에서는 다수의 정책의 영향을 받은 주체에 대해서 권한의 독립적 수행을 보장하면서, 추가적인 충돌 상황을 발생시키기 않는 권한 전파 정책을 제안한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.40-42
• /
• 2023

해상등부표는 선박 통항의 안전을 위해서 필요한 시설로, 낚시 배와 소형 어선을 포함한 선박의 항로표지에 중요한 역할을 한다. 그런데 야간에는 해상에 설치된 등부표의 위치나 번호판 식별이 어려워 소형 어선이나 선박이 등부표에 가까이 접근하여 등부표를 발견하지 못하는 경우 충돌하여 선박이 파손되거나 인명사고가 발생한다. 이 적용사례는 소형 어선이나 선박이 야간에도 등부표의 위치와 번호판을 손쉽게 식별할 수 있도록 등부표에 윤곽표시조명장치를 구비하여 충돌사고의 예방과 항로표지서비스를 향상시키는 목적을 갖고 개발을 추진하였다. 윤곽표시조명장치는 태양광전원을 이용하여 IP68 방수형 고효율 LED조명을 구비하여 멀리서도 식별이 가능하여 야간에도 신속하게 안전한 항로를 확보할 수 있게 되었으며, 근접센서 콘트롤러를 결합하여 선박이 등부표에 가까이 접근하면 LED조명이 점멸하며 깜빡이면서 충돌위험을 알리는 경보기능을 추가하여 등부표와 충돌사고를 예방할 수 있게 되어 항로표지서비스의 향상을 도모하게 되었다.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.2
• /
• pp.59-87
• /
• 2012

Recent studies reveal that eclogite formed in the Hongseong area and post collision igneous rocks occurred throughout the Gyeonggi Massif during the Triassic Songrim Orogeny. These new findings derive the tectonic model in which the Triassic Qinling-Dabie-Sulu collision belt between the North and South China blocks extends into the Hongseong-Yangpyeong-Odesan collision belt in Korea. The belt may be further extended into the late Paleozoic subduction complex in the Yanji belt in North Korea through the Paleozoic subduction complex in the inner part of SW Japan. The collision belt divides the Gyeonggi Massif into two parts; the northern and southern parts can be correlated to the North and South China blocks, respectively. The collision had started from Korea at ca. 250 Ma and propagated to China. The collision completed during late Triassic. The metamorphic conditions systematically change along the collision belt:. ultrahigh temperature metamorphism occurred in the Odesan area at 245-230Ma, high-pressure metamorphism in the Hongseong area at 230 Ma and ultra high-pressure metamorphism in the Dabie and Sulu belts. This systematic change may be due to the increase in the depth of slab break-off towards west, which might be related to the increase of the amounts of subducted ocecnic slab towards west. The wide distribution of Permo-Triassic arc-related granitoids in the Yeongnam Massif and in the southern part of the South China block indicate the Permo-Triassic subduction along the southern boundary of the South China block which may be caused by the Permo-Triassic collision between the North and South China blocks. These studies suggest that the Songrim orogeny constructed the Korean Peninsula by continent collision and caused the subduction along the southern margin of the Yeongnam Massif. Both the northern and southern Gyeonggi Massifs had undergone 1870-1840 Ma igneous and metamorphic activities due to continent collision and subduction related to the amalgamation of Colombia Supercontinent. The Okcheon metamorphic belt can be correlated to the Nanhua rift formed at 760 Ma within the South China blocks. In that case, the southern Gyeonggi Massif and Yeongnam Massif can be correlated to the Yangtz and Cathaysia blocks in the South China block, respectively. Recently possible Devonian or late Paleozoic sediments are recognized within the Gyeonggi Massif by finding of Silurian and Devonian detrital zircons. Together with the Devonian metamorphism in the Hongseong and Kwangcheon areas, the possible middle Paleozoic sediments indicate an active tectonic activity within the Gyeonggi Massif during middle Paleozoic before the Permo-Triassic collision.