DOI QR코드

DOI QR Code

Analysis of the Impinging Spray Behavior Accompanying with Change of Phase

상변화를 동반한 충돌분무의 거동해석

  • 송홍종 (부산대학교 대학원) ;
  • 차건종 (부산대학교 기계기술연구소) ;
  • 김덕줄 (부산대학교 기계기술연구소)
  • Published : 2000.06.01

Abstract

The emission in the exhaust gas from diesel engine is effected by the fuel spray characteristics. The spray of D.I. diesel engine impinges on a piston cavity and a cylinder wall. It is very important to know exactly the distribution and behavior of the spray inside cylinder. The objective of this study is to develop more accurate evaporation model. The EPISO code was used to analyze the flow characteristics in the engine. The Wakil model and the Faeth model are applied to the EPISO code to analyze the behavior of impinging spray. And also experimental and numerical analysis were carried out. The spray behavior characteristics were investigated by changing injection pressure, ambient pressure and temperature. The behavior of impinging spray was strongly effected by the change of ambient pressure and temperature. The effects of evaporation and rebounding droplet should be considered.

Keywords

References

  1. Fujimoto, H., Takagishi, S., Senda, J., 1995, 'Spray Characteristics of High-Pressure Diesel Spray,' ILASS·Korea, pp. 126-131
  2. 차건종,김덕줄,1999,'충돌 분무의 내부구조와 미지적 거동에 관한 연구,'대한기계학회 논문집,제23권,제4호,pp.470-478
  3. Kato, S. and Onishi, S., 1990, 'Newtype of Diesel Engine by Impinging of Fuel Jet (Oska-D),' SAE 9016
  4. Issa, R. I., 1986, 'Solution of the Implicitly Discretised Fluid Flow Equations by Operator splitting,' J. Compo Phys., 61(1), pp. 45-65 https://doi.org/10.1016/0021-9991(86)90099-9
  5. Watkins, A. P., 1989, 'Three-dimensional Modeling of Gas Flow and Sprays in Diesel Engines,' In ?N.C. Makatos, editor, Computer Simulation of Fluid Flow, Heat and Mass Transfer and Combustion in Reciprocating Engines, pp. 193 -237, Hemispher
  6. Wang, D. M., 1992, 'Modeling Spray WaH Impaction and Combustion Processes of Diesel Engines,' Ph.D.thesis, University of Manchester faculty of Technology
  7. K. Park, and D. M. Wang, and A. P. Watkins, 1993, 'A Contribution to the Design of Novel Direct Injection Diesel Engine Combust System. Analysis of Pip Size,' Appl. Math Modeling, Vol 17, pp.114-124 https://doi.org/10.1016/0307-904X(93)90036-G
  8. Park. K. and Watkins. A. P., 1996. 'An Investigation of Combustion Chamber Shapes Small Automotive Direct Injection Diesel Engine Employing Spray Impaction,' IMechE Journal of Automobile Engineering, Vol 2, pp. 261-272
  9. 류성목,차건종,김덕줄,박권하,1998,'기연소실에서 새로운 충돌분무 형성에 대한 치적 고찰,' 대한기계학회 논문집,제22권 11호,pp.1625-1634
  10. 김덕줄,차건종,서경일,1996'충돌원판 설치조건에 따른 디젤분무의 거동특성', 액체미립화학회 1996년도 학술강연회 논문집, pp.92-98
  11. El-Wakil, Uyehara. O. A. , and Myers. P. S., 1954, 'A Theoretical Investigation of Heating Up Period of Injected Fuel Droplet Vaporizing in Air,' NASA TN_3179
  12. Faeth. G. M., 1983, 'Evaporation And Combustion Of Sprays,' Prog. Energy Combust. Sci. Vol. 9, pp. 1-76 https://doi.org/10.1016/0360-1285(83)90005-9
  13. Faeth G. M., 1977, 'Current Status of Droplet and Liquid Combustion,' Prog. Energy Combust. Sci. Vol. 3, pp. 191-224 https://doi.org/10.1016/0360-1285(77)90012-0
  14. Watkins, A. P. and Park, K., 1996, 'Assesment and Application of a New Spray Wall Impaction Model,' Competers Reciprocating Engines and Gas Turbines, l. Mech,E, pp. 1-10.