• 한국지구과학회:학술대회논문집
• /
• 2006.02a
• /
• pp.230-234
• /
• 2006

본 연구에서는 미분화 운석 중 오디너리 콘드라이트를 주사전자 현미경으로 관찰하여 열변성, 충격 변성 정도, 지구상에서의 풍화 정도에 따라서 그 구성 성분과 조직이 어떤 변화를 보이는지 알아보았다. 이를 위해 15개의 오디너리 콘드라이트에 대해 각각 연마편 및 연마박편을 준비하였으며, 주사전자 현미경 사진을 이용하여 열변성 단계별로 콘드률과 기질의 경계를 비교하였다. 열변성이 증가할수록 콘드률과 기질의 경계는 점차 모호해 진다. 충격변성을 받았는지의 유무는 감람석을 관찰하여 비교적 쉽게 인지할 수 있다. 충격변성을 받지 않은 콘드률 내의 감람석은 완전 소광과 불규칙적인 깨짐을 보이지만 충격변성을 받은 경우 파동소광과 규칙적인 깨짐을 보인다. 지구상에서 풍화를 받은 경우 철-니켈 금속의 산화가 가장 먼저 진행된다. 풍화에 의한 철산화물은 맥상으로 나타나거나 기존의 철-니켈 금속을 치환하여 나타난다. 철산화물에 의해 풍화를 받은 콘드라이트는 전체적으로 갈색을 띄게 된다.

• The Korean Journal of Pharmacology
• /
• v.32 no.3
• /
• pp.433-444
• /
• 1996

We describe a novel approach to evaluate quantitatively the amounts of denatured proteins in cells upon heat exposure. A thiol compound, diamide [azodicarboxylic acid bis (dimethylamide)] causes protein cross-linking with exposed sulfyhydryl residues of denatured proteins. Since denatured proteins expose normally well-hidden sulfhydryl groups, these will be preferentially cross-linked by diamide. Thus diamide acts to 'trap' denatured proteins. We observed that protein aggregates (high molecular weight protein aggregates, HMA) appeared on SDS-polyacrylamide gels run under non-reducing conditions and that the amount of HMA can be quantified by scanning the gels using a gas flow counter. Heating cells followed by a fixed dose of diamide exposure resulted in HMA increases in a heat-dose dependent manner, demonstrating that the quantitation of HMA could serve as a measure of heat-denatured proteins. We compared thermotolerant and nontolerant cells and found decreased HMA in tolerant cells upon heat treatment. As an attempt to examine the kinetics of protein renaturation (or 'repair'), we measured the amounts of aggregates formed by the addition of diamide at various times after heat shock. Such experiments demonstrate an equally rapid disappearance of HMA in previously unheated and in thermotolerant cells. Levels of HMA in tolerant cells increased significantly after electroporation of HSP70 specific mAbs, suggesting an involvement of HSP70 in reducing HMA levels in thermotolerant cells upon heat exposure. Immunoprecipitation studies using anti-HSP70 antibody indicated an association of HSP70 with heat-denatured proteins. Our results suggest that heat induces protein denaturation, and that elevated level of HSP70 present in thermotolerant cells protects them by reducing the level of protein denaturation rather than by facilitating the 'repair' (or degradation) process.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.3
• /
• pp.131-139
• /
• 2016

Detailed knowledge on maskelynite, a glassy phase of plagioclase found in shocked meteorites and impact craters, is essential to understand a shock metamorphism. Here, we explore an inhomogeneous shock metamorphism in the lunar meteorite Mount DeWitt (DEW) 12007 with an aim to understand the formation mechanism of maskelynite. Most plagioclase grains in the DEW 12007 partially amorphized into maskelynite with a unidirectional orientation. Back-scattered electron (BSE) images of maskelynite show a remnant of planar deformation fracture possibly indicating that the maskelynite would be formed by solid-state transformation(i.e., diaplectic glass). Plagioclase with flow texture is also observed along the rim of maskelynite, which would be a result of recrystallization of melted plagioclase. Results of Raman experiments suggest that shock pressure for plagioclase and maskelynite in the DEW 12007 is approximately 5-32 GPa and 26-45 GPa, respectively. The difference in shock pressures between plagioclase and maskelynite can be originated from 1) external factors such as inhomogeneous shock pressure and/or 2) internal factors such as chemical composition and porosity of rock. Unfortunately, Raman spectroscopy has a limitation in revealing the detailed atomic structure of maskelynite such as development of six- or five-coordinated aluminum atom upon various shock pressure. Further studies using nuclear magnetic resonance spectroscopy are necessary to understand the formation mechanism of maskelynite under high pressure.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.170-179
• /
• 1993

결정성 고분자/비결정성 고분자/충격보강재의 조합으로 이루어진 열가소성 삼성분계 블렌드의 미세구조 조절이 기계적 및 열적 거시물성에 미치는 영향을 살펴보았다. 결정성 고분자로는 나일론6를 비결정성 고분자로는 변성폴리페닐린 옥사이드(PPO)를 충격 보강재 로는 스티렌-에틸렌부틸렌-스티렌(SEBS) 삼중블록 공중합체를 사용하였고 비상용인 나일 론6와 변성 PPO 사이의 상용화를 위해 반능 상용화(reactive compatibilization)방법을 사용 하였다. 반응 사용화에 사용된 반응기로는 나일론의 말단기에 있는 친핵성기인 아민기와 반 응성이 높은 친전자성기인 무수말레인산(MAH)을 충격보강 고부 SEBS에 그라프트시켜 충 격보강 고무내의 SEBS-MAH의 함량을 증가시킴에 따라 처음에 PPO 분산상에 있던 고무 가 나일론 연속상으로 이동하는 현상을 관찰하였다. 이러한 충격보강 고부의 SEBS-MAH 함량 증가에 의한 PPO 분산상에서 나일론상으로의 이동이 내충격성의 향상 및 내열성의 저 하와 밀접한 관계가 있다는 것을 알았다.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.188-193
• /
• 2003

To predict changes in biomechanical parameters such as intradiscal pressure, and the shock absorbing mechanism in the spinal motion segment under different impact duration/loading rates, a three dimensional L3/L4 motion segment finite element model was modified to incorporate the poroelastic properties of the motion segment. The results were analyzed under variable impact duration for normal and degenerated discs. For short impact duration and a given maximum compressive force, relatively high cancellous pore pressure was generated as compared with a case of long impact duration, although the amount of impulse was increased. In contrast relatively constant pore pressure was generated in the nucleus. Disc degeneration increased pore pressure in the disc and decreased pore pressure in the cancellous core, which is more vulnerable to compressive fracture compared with intact case.

• Journal of Adhesion and Interface
• /
• v.23 no.2
• /
• pp.44-52
• /
• 2022

Epoxy resin has the disadvantage of being easily destroyed by instantaneous impact due to its high crosslinking density despite its high glass transition temperature (T_g) and excellent properties. To compensate for this, in this study, polyol was synthesized by ring opening polymerization of propylene glycol (PPG) diamine, Jeffamine D 2000 and propylene carbonate, and urethane modified epoxy was synthesized using this. The properties of the synthesized urethane modified epoxy were confirmed by FT-IR, H-NMR. To confirm the degree of improvement in impact resistance as an adhesive, a urethane modified epoxy adhesive was prepared by mixing a digylcidyl ether bisphenol A (DGEBA) with curing agent and curing accelerator. Properties test of urethane modified epoxy were shear strength, tensile strength and impact strength. As a result, excellent results were obtained in all test when the ratio of DGEBA : urethane modified epoxy was 8:2.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.11a
• /
• pp.87-87
• /
• 1998

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.368-369
• /
• 2003

선진 복합재료의 매트릭스 수지로서 자장 많이 사용되고 있는 에폭시는 수지 및 경화제의 종류에 따라 여러 가지 물성을 나타낼 수 있다. 에폭시 수지는 기계적 물성 및 내화학성이 우수하고 경화시 수축변형이 적은 장점이 있으나 높은 가친밀도 때문에 순간적인 충격에 취약하다는 단점을 지니고 있다. 따라서 이러한 에폭시 수지의 취성 (brittleness)을 개선하기 위해 충격강도를 증가시킬 수 있는 강인화제를 혼합하여 경화시키는 방법이 사용되고 있다[1]. (중략)

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.645-648
• /
• 2008

The expansion joint is an important part of the bridge, but the failure is occurred on the non-shrinkage concrete which is connected to the slab of the bridge and the expansion joint, and the other problem is the release of anchors in expansion joint due to the impact and vibration during the driven car on the bridge, especially an overloaded car. In this study, to overcome the failure of non-shrinkage of concrete, high impact resisting mortar is developed. The high impact resisting mortar shall be a polyurethane material compounded with an aggregate system to develop excellent flexibility characteristics, high load bearing capacity.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.673-674
• /
• 2007

22.9KV-Y 배전선로의 특고압 수전설비에 계량장치로 부설되어 운영중인 계기용변성기 M.O.F(Metering Out Fit)는 계기용변압기와 계기용변류기를 하나의 상자 속에 수납한 것으로 전력량계와 조합시켜서 전력측정의 변성장치로 사용되고 있다. 계량장치로 사용되고 있는 계기용변성기는 고객과 공정거래확립을 위하여 상시 정해진 비오차 특성을 만족하여야 한다. 그러나 고객구내 수전설비에서 파급고장이 발생시 과전류로 인하여 계기용변성기의 권선에 큰 충격이 가해져 비오차 특성에 문제점이 발생하나, 이 비오차를 측정할 때는 현재 정전상태에서 측정이 가능하여 현실적으로 측정을 할 수 없다. 이에 전기를 사용하는 활선상태에서도 비오차 측정을 할 수 있는 개발품에 대하여 고찰하고자 한다.