• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.62.1-62
• /
• 2002

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.411-416
• /
• 1996

최근 웨스팅하우스사가 SECY-83-472에 근거하여 개발한 최적평가방법론인 WCOBRA/TRAC UPI EM을 이용하여 Appendix K, Superbounded, Nominal 계산을 고리 1호기에 대하여 수행하였다. 15%증기발생기 관막음율, 출력 첨두 계수 2.35, 최대 선형 열출력 15.588kw/ft을 사용하여 계산한 결과 Appendix K 최대 피복재 온도는 1941℉로서 KAERI/Siemens가 RTSR 작성시 수행한 해석에 비하여 운전여유도가 증가한 것으로 나타났으며, 그 결과가 SECY 방법론에 합당함을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.71-72
• /
• 2012

본 논문은 승압형 플라이백 컨버터에 탭을 내어 절연형 스위치드 커패시터셀과 차지펌프를 추가한 새로운 토폴로지의 컨버터를 제안한다. 제안하는 회로는 차지펌프를 추가한 스위치드 커패시터 셀의 출력과 플라이백의 출력을 직렬 연결하여 기존의 스위치드 커패시터 플라이백 컨버터보다 고승압에 유리하다. 또한 3차권선이 아닌 탭을내어 사용함에 있어 결합계수의 손실이 적어 고효율의 전력전달이 가능하다. 제안된 회로의 동작원리를 설명하였고 80W급 하드웨어 프로토 타입을 이용하여 검증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.64-73
• /
• 1997

솔리드 모델러, 자동요소분할 기법, 4면체 특이요소, 응력확대계수의 해석 기능을 통합하여, 3차원 균열의 응력확대계수를 효율적으로 해석할 수 있는 시스템을 개발하였다. 균열을 포함하는 기하모델을 CAD 시스템을 이용하여 정의하고, 경계조건과 재료 물성치 및 절점밀도 분포를 기하모델에 직접 지정함으로써, 퍼지이론 에 의한 절점발생과 데로우니 삼각화법에 의한 요소가 자동으로 생성된다. 특히, 균열 근방에는 4면체 2차 특이요소를 생성시켰으며, 유한요소 해석을 위한 입력 데이터가 자동으로 작성되어 해석코드에 의한 응력 해석이 수행된다. 해석 후, 출력되는 변위를 이용하여 변위외삽법에 의한 응력확대계수가 자동적으로 계산되어 진다. 본 시스템의 효용성을 확인하기 위해, 인장력을 받는 평판내의 표면균열에 대해 해석하여 보았다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.6
• /
• pp.526-534
• /
• 1990

In the implementation of digital filters, the coefficient errors are occurred when filter coefficients are quantized by finite wordlength. They change the frequency responsed and output characteristics of the filters and therefore they become a main reason which could stimulate coefficient sensitivity especially in recursive filters. In this paper, we study the characteristics of coefficient sensitivity for WDF that is less effective to the coefficient errors. The simulation based on the method of fixed-point quantization demonstrates that the frequency responses of WDF have better preformance than those of conventional cascade IIR filter when variations of finite wordlength is considered.

• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.177-184
• /
• 2016

Recently linear accelerator of radiation therapy intensity modulated radiation therapy, stereotactic radiation therapy are widely used. Such radiation treatment techniques are generally difficult to exclude the small field by using the inverse treatment plan. It is necessary to dose an accurate measurement of characteristics of the small field. Thus, using different detectors to measure the volume of the effective percentage depth dose, beam profile, and the output factor of the small field was to evaluate the dose characteristics of each detector. Experimental results for the X-ray beam 6 MV energy beam quality($PDD_{20}/PDD_{10}$) is $10{\times}10cm^2$ Diode detector is as high as 2.4% compared to Pinpoint detector. All field size to lesser effective volume of Diode detector shows that it is far better than other detectors by more than 50% of small penumbra, therefore spatial resolution far excellent. In field size $2{\times}2cm^2$ Semiflex detector was measured about 2% less than the other detector. Field size $1{\times}1cm^2$ is that there is no judgment about the validity show the difference between 20%. Field size $1{\times}1cm^2$ from the measured values of the Diode detector and Pinpoint detector showed a 13% difference. Less than field size $3{\times}3cm^2$ the feed to the difference between the output factor of the effective volume of the detector to be used for the effective volume available to the detector.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.561-568
• /
• 2020

A performance analysis was conducted according to changes in inflow velocity and the tip speed ratio of a portable horizontal-axis hydro turbine that can be used for marine leisure sports and outdoor activities by using the commercial computational fluid dynamics software ANSYS CFX. By using the analysis result and flow field analysis, the design was reviewed and the performance of the device was confirmed. In addition, data necessary to improve the performance of the hydro turbine were acquired by performing an additional performance analysis according to the variable blade pitch angle. The results among the numerical analysis cases show that the highest performance at all inflow velocities and blade pitch angles if achieved at a tip speed ratio of 4. The output power was found to be 30 W even under some conditions below the design flow rate. Among the numerical analysis cases, the highest output power (~ 85 W) and power coefficient (~ 0.30) were observed at an inlet flow rate of 1.5 m/s, a blade pitch angle of 3°, and a tip speed ratio of 4.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.554-560
• /
• 2019

Excore Nuclear Flux Monitoring System in Nuclear Power Plant monitors continuous reactor power up to maximum 200%. The monitoring method, however, has to be different depending on the reactor power level. Because the logarithmic pulse signals must be counted and processed exactly due to large uncertainty if their levels are low, on the other hand, they must be processed through statistical methodolgies if theirs are high to get exact monitoring values, in point of thermal degradation view. Therefore, we developed thermal degradation input signal selection circuit to transfer low level reactor power monitoring circuit to high level reactor power circuit at rated value in this paper. We proved their validities through testing them using real data used in nuclear power plant and analyzed their results. And, These methods will be used to measure the neutron level of excore nuclear flux monitoring system in nuclear power plant.

• Journal of radiological science and technology
• /
• v.26 no.1
• /
• pp.31-37
• /
• 2003

The conclusions after appraisal usefulness of korean 30 kHz inverter type X-ray equipments which are currently used in the clinics are like those followings. 1. The specific characters of mA, kVp, msec in the radiography keep very good accuracy and showed good waveform also under KS regulations. 2. The output of the X-ray equipment is showed 1.7 times higher than single-phase. 3. mA, kVp of the fluoroscopy and Sopt film exposure mA, kVp showed appropriated results under the regulations. 4. As we consider the conversion factor of image intensifier tube used for two years, it showed pretty high results, 310 at 75 kV, and knew that the conversion factor which followed by increasing kVp increased its computations like Kim's experimentation. Those X-ray equipment showed excellent results in the appraisal while those were operating so we think that those X-ray equipments will be substitute for expensive foreign equipment in korean domestic medical equipment in the future.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.39-47
• /
• 2011

Ergezinger's method, one of the layer-by-layer algorithms used for multilyer perceptrons, consists of an output node and can make premature saturations in the output's weight because of using linear least squared method in the output layer. These saturations are obstacles to learning time and covergence. Therefore, this paper expands Ergezinger's method to be able to use an output vector instead of an output node and introduces a learning rate to improve learning time and convergence. The learning rate is a variable rate that reflects the correlation coefficient between new weight and previous weight while updating hidden's weight. To compare the proposed method with Ergezinger's method, we tested iris recognition and nonlinear approximation. It was found that the proposed method showed better results than Ergezinger's method in learning convergence. In the CPU time considering correlation coefficient computation, the proposed method saved about 35% time than the previous method.