• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.106-109
• /
• 2017

저궤도 위성의 배터리는 일반적으로 임무 및 식 구간에서의 부족한 전력 공급을 위해서 사용 되며, 버스 전압에 연결되어 있는 경우 출력 필터의 일부 기능을 담당하게 된다. 따라서 배터리의 주요 설계 요인은 전력 요구 분석을 통해 에너지 균형조건을 맞추기 위한 설계가 일반적이고, 배터리를 이용한 출력 전력 필터의 역할은 설계의 요인에 포함 되지 않는다. 하지만, 배터리는 전력 공급의 역할이외에도, 출력 전류의 변동이 극심하거나, 주기적으로 일정한 출력 변동을 발생하는 로드 등에 대한 필터 역할로써도 사용이 가능하다. 출력 커패시터를 배터리로 대체 할 경우 inrush 전류의 감소 및 추가적인 보호회로의 설계의 불필요 등의 장점을 가지고 있다. 배터리를 위성의 전력 공급을 위한 목적으로 사용하는 경우에는 전력 요구 분석을 통한 설계가 타당하나, 출력 로드 변동에 따른 영향을 줄이기 위해 필터로써 배터리를 사용하는 경우에는 사이즈 및 임피던스에 대한 추가적인 분석이 요구 된다. 따라서 본 논문에서는 저궤도 위성에서의 출력 전력 필터로 배터리를 이용한 설계 방안 및 성능 분석을 수행 하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.2
• /
• pp.135-141
• /
• 2006

In this paper, LC output filters are designed to reduce output harmonics and harmonic analysis are peformed. Generally, multilevel inverters are used in high power application and operates with low switching frequency, which, in turn, generates large output harmonics. Output filters we used to reduce output harmonics. The design approach to reduce output harmonics of the 31eve1 multilevel inverter is discussed and DSP(TMS320C31) is used for the digital control of the system. The design example is given. The designed system is verified by simulation and experiment.

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.730-742
• /
• 1995

The steam generator feedwater and level control system is designed by two steps of the feedwater control design and the feedback loop controller design. The feedwater sen system is designed by the optimal LQR/LQG approach and then is modified by the LTR method to recover the robustness. The plant characteristics are subject to change with the power variation and these dynamic properties are considered in the design of the feedback controller. All the designs are made in the continuous domain and are digitalized by applying the proper sampling period. The system is simulated for the two cases of power increase and decrease. From the results of simulation, it is found that the controller constants would rather be invariable during the power increase, while for the case of power decrease they should be changed with the power variation to keep the system stability.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.97-101
• /
• 2000

We proposed and demonstrated a new scheme for subtracting the source excess noise from the output of the fiber-optic gyroscope. Unlike the previous methods, this scheme has an advantage of not requiring a delaying fiber for source noise detection and can be simply applied to fiber gyroscope operating at the proper frequency. By usmg this scheme. the proper frequency component of the source excess noise was subtracted from the gyroscope output. As a result, we obtained the reduction of noise by 12 dB (electrical) which was measured from the noise floor spectrum in the fiber gyroscope modulated at the proper frequency. We also obtarned !be random walk coefficient of thc gyro output reduced by a factor of 3.5. f 3.5.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.262-266
• /
• 1998

하나로 핵연료의 피복관과 봉단마개 재료로 사용되는 Aluminum 1060의 전자빔 용접부의 비드 특성을 조사하기 위하여 bead-on-plate 용접을 하였다. 비드의 단면을 절단하여 가속전압, 빔 전류, 용접속도에 따른 비드의 폭과 용입 깊이의 변화를 측정하고 용접부에 발생한 용접결함을 관찰하였다. 실험결과 가속전압과 범 전류의 증가에 따라 용입 깊이는 직선 비례적으로 계속 증가하였지만 비드폭은 그 증가율이 감소하는 경향이었다. 용접속도의 증가에 따라서 비드 폭과 용입깊이는 감소하는 경향을 보였다. 또한 범 출력이 높은 용접부의 root부에 다수의 porosity 가 발생하는 것을 관찰 할 수 있었으며 핵연료 봉단 마개의 porosity와는 다른 것을 확인하였다.

• Journal of Oral Medicine and Pain
• /
• v.17 no.2
• /
• pp.109-117
• /
• 1992

저출력레이저는 인체조직에 biostimulation effects를 가지므로 구강주위에 발생하는 여려가지 질병에 대한 저출력레이저광의 효과에 관하여 많은 연구가 시도되고 있으며 또한 치료에 응용되고 있다. 감염창상에 저출력레이저 조사시 조직치유의 기전이 세균 성장에 의한 조직손상보다 주위 정상조직의 biostimulation effects가 우세하기 때문이라는 가설을 확인하고저 본 연구를 시행하였다. 백서 7마리를 레이저 조사군과 대조군으로 나누어 감염창상의 면적차이를 비교하여 다음고 같은 결론을 얻었다. 1. 저출력레이저 조사군에서 창상수축율이 현저히 높았다. 2. 부종의 빈도는 저출력레이저 조사시 뚜렷하게 감소하였다. 위의 사실로 보아 저출력레이저 조사시 감염창상의 치유촉진은 주위 정상조직의 biostimulation effect가 세균증식에 의한 조직의 손상보다 우세하기 때문이라는 가설을 확인할 수 있었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.104-112
• /
• 2019

The material properties of the 3D printing cement composite mortar were evaluated, and the performance range in which printing was possible was calculated using the void ratio in a fresh state as a single index. As a results of the tests, as the water-binder ratio (W/B) increased, the mortar flow value increased and the density and strength decreased. As the sand-binder ratio (SS/B) increased, the mortar flow value decreased. However, strength and density increased and decreased up to a certain SS/B. As admixture-binder ratio (Ad/B) increased, mortar flow value, density, and strength decreased. These trends make it difficult to mix-design to meet the target performances of 3D printing mortars, represented by extrudability and buildability. The value of mortar flow increased proportionally with the void ratio, while the density and strength apparently decreased as the void ratio increased. This indicates that void ratio can be utilized as a single index for controlling the material properties in the design of mortar mixtures. It was found that mortar mixture could be printed by a 3D printer when the void ratio was in the range from 0.6 to 0.7. This was verified by printing a mortar which has the void ratio of 0.634. The mortar was produced with the mixture design of W/B 35.0%, SS/B 60.0%, and Ad/B 0.1%. Further research applying diverse admixtures is needed to improve the quality of 3D printing output mortars.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.267-272
• /
• 2021

In this study, the output results of 3D printed exterior materials for application to buildings of various shapes are output tests using test specimens, in which 3D printing concrete is cast in a mold and accelerating agents are used to ensure stackability. The unit weight and strength characteristics of the body were analyzed. Compared to the unit weight of concrete placed in the mold, the unit weight of 3D printing concrete using accelerating agents tends to decrease by approximately 3.5% to 5.0%, and the compressive strength is the compressive strength of the concrete placed in the mold. In comparison, the compression strength of the output by 3D printing tended to decrease by approximately 36% to 46%. In the flexural strength, the compressive strength of the output through 3D printing decreased by approximately 36% to 46% compared to the compressive strength of concrete placed in the mold. The impact on the strength characteristics of 3D printed concrete using accelerating agents tended to decrease by approximately 2.0 to 5.8%. Therefore, 3D printing output accelerating agents can be used.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.8
• /
• pp.42-45
• /
• 2002

A low power SDRAM output buffer with reduced power line noise and feedthrough current is presented. In multi I/O SDRAM output buffer, feedthrough current as well as the corresponding power dissipation are reduced utilizing proposed undershoot protection circuits. Ground bounce is minimized by the pull down driver using intelligent feedback scheme. Ground bounce noise is reduced by 66.3% and instantaneous and average power are reduced by 27.5% and 11.4%, respectively.

• Plant Journal
• /
• v.14 no.1
• /
• pp.47-51
• /
• 2018

This study analyzed the effect of power output reduction in coal fired power generation on the change of system marginal price and green house gas emissions. Analytical method was used for electricity market forecasting system used in korea state owned companies. Operating conditions of the power system was based on the the 7th Basic Plan for Electricity Demand and Supply. This as a reference, I analyzed change of system marginal price and green house gas emission by reduced power output in coal fired power generation. The results, if the maximum output was declined as 29 [%] to overall coal-fired power plant, system marginal price is reduced 12 [%p] compared to before and decreasing greenhouse gas emissions were 9,966 [kton]. And if the low efficiency coal fired power plant that accounted for 30 [%] in overall coal-fired power plant stopped by year, system marginal price is reduced 14 [%p] compared to before and decreasing greenhouse gas emissions were 12,874 [kton].