• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.1
• /
• pp.77-96
• /
• 1989

In diesel engines, it is inevitable that the torsional vibration is produced by the fluctuation of engine torque. Therefore, if the occurence of torsional vibration is confirmed in the design stage or the torsional vibration is observed on the bed of test run, it is necessary to establish some preventive measures to avoid dangerous conditions. Major preventive measures are as follows : 1. Changing the natural frequency of shaft system. 2. Repressing the vibration amplitude by the damping energy. 3. Counterbalancing the exciting torque by the resistant torque. 4. Counterbalacing the harmonic component of exciting energy. In above methos, the damper is the last measure to be used for controlling the torsional vibration. In this thesis, the design of viscous damper that absorbs the exciting energy is investigated and a number of problems associated with the design of viscous damper are treated and a computer pregram for the process of damper design is developed. A viscous damper for a high speed diesel engine is designed and its effect is simulated by the author's computer program.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1031-1036
• /
• 2007

Torsional vibration analysis is necessary at design stage to ensure the reliability of a system particularly when the driven machine is a reciprocating compressor. This paper contains the results of torsional vibration analysis and fatigue strength evaluation for 540 kW compressor driving motor. Torsional vibration analysis showed that the $2^{nd}$ torsional mode of the entire shaft system has the possibility of resonance with the $14^{th}$ order excitation of compressor and twin line frequency of motor at operating speed. Therefore, the analyses were required to ensure the structural reliability of the motor. The fatigue strength was evaluated for the shaft and inner fans using the results of forced vibration analysis. It is concluded that the motor has sufficient fatigue strength under normal operating condition.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.60.1-60.1
• /
• 2011

본 연구에서는 풍력 터빈 블레이드의 다분야 통합 최적 설계를 위하여, 진동하는 비정상 공력하중에 의한 작동 수명을 고려한 최적화 과정을 수행하였다. 최적화 대상으로는 NREL의 1.5MW 급 풍력터빈을 baseline 으로 하였고, NREL의 FAST 프로그램을 이용하여 발전기의 정격 출력 및 블레이드에 작용하는 비정상 공력 하중 특성을 분석하였다. 최적화 수행 시 블레이드 형상의 효율적인 구현을 위해 형상모델링 함수를 이용하여 코드 길이와 트위스트 분포를 모델링하였다. 그리고 상용 MDO Framework 인 Piano를 이용하여 블레이드 루트부의 비정상 공력하중 조건을 완화시키는 최적화 설계를 수행하였다. 정격출력을 유지하면서도 Out of Plain 방향의 하중 조건을 개선하여 보다 긴 작동 수명을 기대할 수 있는 블레이드 형상을 설계하였다.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.1
• /
• pp.53-59
• /
• 1999

Input shaping technique has been used as a simple method of controlling vibration. With the conventional methods previously proposed by several authors, the frequency range that shows a good performance is restricted. When the designed frequency being different from the natural frequency of a system, the performance of control degrades remarkably. This paper introduced a new technique that uses digital IIR filter to control vibration. This technique has robustness for changing of parameter. In order to prove this we applied input shaping method to 2 axial overhead crane.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.105-111
• /
• 2003

The three-axis road simulator is the test equipment which can simulate the standardized road conditions for the durability evaluation of automotive components such as suspensions. The road load data are collected and acquired from a vehicle test, and then these data are used to simulate road load conditions by the road simulator which consists of hydraulic actuators, link mechanism and servo controller. The link mechanism must be designed in consideration of the dynamic effect and interference during three axes motions in order to generate accurate motions. In this paper, the structural and kinematic analysis of the link mechanism is performed, and these results can be used for developing the three-axis road simulator. The three-axis road simulator provides considerable savings in cost, development time, and testing risk during developing automotive components.

• 전기의세계
• /
• v.13 no.3
• /
• pp.28-37
• /
• 1964

It is the intention of this thesis to discriminate and investigate the cause of the shaft vibration of the vertical type hydroelectric power generator with respect to electrical, mechanical and hydraulic aspects, and to analyze the vibration which will occure by the each cause investigated above. In order to test the shaft vibration of No.1 generator in Hwachon, Korea new measurement method and measuring equipments were designed. In practice the shaft vibration of the generator was measured by above equipments and analyzed by the discriminative method. Detailed explanation for the designed measurement method and instruments is presented, and the results which I had tested three times for the generator No.1 in Hwachon power plant are added. As a appendix the mechanism and causes of the thrust bearing's wear and remarks for the runner are written.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.389-392
• /
• 1997

This paper presents the dynamic analysis and experiment for rotor systems supported by angular contact ball bearings subjected to axial displacement preload. A dynamic software, which has been developed by the authors for the analysis of rotor systems supported by angular contact ball bearings, is used to simulate a uniform shaft system supported by two angular contact ball bearings with the axial displacement preload varied. Experiments are also performed to validate the simulation. An experimental system is constructed which consists of a uniform shaft, two bearings and a device for adjusting the axial displacement preload. Through a series of simulation and experiment, the dynamic characteristics of rotor systems with angular contact ball bearings subject to axial displacement preload are investigated.

• Journal of Drive and Control
• /
• v.5 no.1
• /
• pp.11-16
• /
• 2008

자동차 부품은 주행 중 전후, 좌우, 상하방향의 병진 운동과 각 축에 대한 회전 운동 등 6자유도의 운동을 받는다. 이와 같은 운동에 따라 자동차에 탑재되는 운전석(cockpit), 의자(seat), 연료탱크, 라디에이터, FEM(front end module) 등의 부품 및 모듈 등은 6자유도 운동을 받으면서 각 부품의 기능을 수행하고 있다. 따라서 이들 부품을 짧은 시간 내에 개발하기 위해서는 가속내구시험평가가 필수적인데 이를 위해 유압식 6자유도 가진 테이블을 이용한 기술이 활용되고 있다. 본 해설에서는 자동차 부품 및 모듈의 내구성능 평가 과정과 함께 유압식 6자유도 가진 테이블을 보유하고 관련 부품의 진동내구성능을 평가하고 있는 군산대학교 자동차부품기술혁신센터(KATIC)의 시험 평가장비 및 사례를 기술하였다. 이와 같은 자동차 부품 내구성능평가 방법과 6자유도 가진 테이블을 이용한 시험은 향후 자동차부품 및 일반기계부품 개발업체에서 내구성능향상을 위하여 활용도가 더욱 증대될 것이다.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.4
• /
• pp.137-145
• /
• 1991

A universal joint is a connecting device of two hinges which can transmit torque from one shaft to another at fixed or at varying angles of intersection. It has been used properly not only as rotational but also as intermittent motion. For the particular kinematics condition of a universal joint, torsional and bending vibrations are produced excessively in an elastic driveline. In this paper only the torsional vibration behavior of a driveline with universal joints is analyzed numerically with the discrete model and a design method of the dynamic vibration damper is proposed, in order to reduce torsional vibrations especially in resonance region as a result of parametric variation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.555-563
• /
• 2001

Support dynamics are often important in rotordynamic analyses. It may well happen in real situation of machines such as centrifugal pumps or turbines operating on flexible structure. This paper presents the applications of the impedance coupling method and the improved rotor model for including the support effects on the interaction with the rotor. The impedance coupling techniques are based on the FRFs of each substructure. Its dynamic stiffness matrix can be assembled to generate the system matrix, which satisfy the constraint conditions in the connection coordinates. And, the improved rotor uses the simplified spring-mass models as support properties. The equivalent support models are directly incorporated into the finite element rotor model. To verify the suggested analytical procedures, the results are compared to those of the pump system.