• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.102-115
• /
• 2014

The stamped earth method is a typical ancient engineering technique which consists of in-filling wooden frame with layers of stamped earth or sand. This method has been universally used to construct earthen walls and buildings, etc. The purpose of this article is to understand the construction method and principles of the stamped earthen wall through analysis of various construction techniques of Pungnaptoseong Fortress(Earthen Fortification in Pungnap-dong). First of all, the ground was leveled and the foundations for the construction of the earthen wall were laid. The underground foundation of the earthen walls was usually constructed by digging into the ground and then in-filling this space with layers of mud clay. Occasionally wooden posts or paving stones which may have been used to reinforce the soft ground were driven in. The method of adding layers of stamped earth at an oblique angle to either side of a central wall is the most characteristic feature of Pungnaptoseong Fortress. Even though the traces of fixing posts, boards, and the hardening of earth - all signatures of the stamped earth technique - have not been identified, evidence of a wooden frame has been found. It has also been observed that this section was constructed by including layers of mud clay and organic remains such as leaves and twigs in order to strengthen the adhesiveness of the structures. The outer part of the central wall was constructed by the anti-slope stamped earth technique to protect central wall. In addition a final layer of paved stones was added to the upper part of the wall. These stone layers and the stone wall were constructed in order to prevent the loss of the earthen wall and to discharge and drain water. Meanwhile, the technique of cementing with fire was used to control damp and remove water in stamped earth. It can not be said at present that the stamped earth method has been confirmed as the typical construction method of Korean ancient earthen walls. If we make a comparative study of the evidence of the stamped earth technique at Pungnaptoseong Fortress with other archeological sites, progress will be made in the investigation of the construction method and principles of stamped earthen wall.

• The Journal of Engineering Research
• /
• v.6 no.1
• /
• pp.83-96
• /
• 2004

A soil mailed wall is adapted as road widening measure and is constructed under a miniature abutment built on steel pipe piles. The soil nailed wall called for removal of the existing embankment slope to permanently retain the fill behind the abutment. The soil nailed wall is fully instrumented and is monitored. A 3D finite element analysis is used to study further the behavior of the soil nailed wall. The complete sequence of construction is simulated. The numerical model is calibrated against the instrumented nailed wall. Then a parametric study is conducted. The results provide valuable information related to the effect of the excavation and nailing on the following: axial load and bending moment in the piles, load in the nails, and wall deflections.

• Journal of Korea Water Resources Association
• /
• v.34 no.6
• /
• pp.597-604
• /
• 2001

The objective of the paper was to estimate the changes in acreages of tidal flats after the seawall construction at the Asan Bay and the Chunsu Bay from topographic maps, hydrographic charts, and Landsat TM images. The tidal floats from topographic maps published in one year differ significantly from that in the other, which appears to be attributed to the tide levels at the time of photographing. The hydrographic charts showed that tidal flats increase at rates of 22.3 ha/yr at the Asan Bay and 56.6 ha/yr at the Chunsu Bay after the dike construction. Applying the ISODATA method of unsupervised classifications for the Landsat TM images, the tidal flats were identified, and the resulting acreages for each image estimated. The resulting tidal flats increased at the rates of 21.3 ha/yr at the Asan Bay and 47.3 ha/yr at the Chunsu Bay during twelve years after the dike construction. It was found that the rates of the annual increases from the two data are very close and the differences result from the coastal lines at the charts and the TM images.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.162-166
• /
• 2011

하천제방은 가장 치수효과가 높은 홍수방어시설로서 홍수 시 유수를 원활하게 소통시키고 제내지를 보호하기 위해 하천을 따라 축조한 시설이다. 누수에 의한 제방파괴는 제내지 제체에 드러난 포화표면이 결정적인 요인이 되므로 침윤선을 낮추어 제체하부에 위치하도록 해야 하며 누수가 발생한 제방에 대해서는 적절한 보강기법을 적용해야 한다. 본 연구에서는 하천제방 축조 또는 보강 시 누수에 의한 파괴를 방지하기 위한 방법으로 미국 공병단과 일본 국토기술연구센터에서 사용하는 기법 중 하나인 배수공을 두어 침윤선을 조절하는 방법을 적용하였다. 구체적으로 공병단과 일본 국토기술연구센터에서 제시하는 배수공을 가지는 경우의 제방 실험 및 수치 모형 보정 결과를 비교하였다. 침투 수치 모의는 SEEP/W 프로그램으로 검토하였다. 실험에 적용한 제방의 규격은 제방폭 2.6 m, 둑마루폭 0.4 m, 사면경사 1:2, 제방 높이 0.55 m, 수위 0.5 m이다. 배수공이 없는 제방은 사면에서 누수가 발생하였으며, 배수공 바닥폭이 0.4 m인 공병단과 일본 국토기술연구센터에서 제시하는 배수공을 설치하였을 때는 누수가 발생하지 않았다. 같은 배수공 바닥폭을 가지는 공병단과 일본 국토기술연구센터식 배수공을 설치한 제방의 실험을 비교한 결과, 일본국토기술연구센터식 배수공을 설치한 제방의 침윤선이 공병단식 배수공을 설치한 제방보다 낮았다. 즉, 일본 국토기술연구센터식 사각형 배수공이 다소 안정한 것으로 분석되었다.

• Journal of architectural history
• /
• v.33 no.3
• /
• pp.7-17
• /
• 2024

Bunhwangsa Stone Brick Pagoda, constructed in 634, is Korea's oldest stone pagoda. As a prototype of the Silla Stone Pagoda, the pagoda was constructed using flagstones. Since it was constructed with flagstones, it has been known to be a pagoda that replicates the brick pagoda until now. The latest research suggests that it copies the India Stupa or the Stacked Stone Pagoda more than the Brick Pagoda. However, the Bunhwangsa stone brick pagoda has a significant difference in terms of construction technique and shape compared to Brick Pagodas, India Stupas, and Stacked Stone Pagodas. Therefore, it is worth paying attention to the stone building technique used in Silla. Through this study, I would like to clarify that the Bunhwangsa stone brick pagoda is a stone pagoda that creatively reflects the existing Silla stone building techniques such as stone fortresses and stone chamber tombs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1249-1253
• /
• 2007

제방은 제내지에 거주하는 인간의 재산과 삶을 방어하고, 홍수를 제어하는 가장 기본적인 수공구조물이다. 제방파괴 원인은 월류, 활동, 침식, 그리고 침투 등으로 분류되어 질 수 있다. 특히 간극수압에 의해 발생하는 침투는 제방 내부침식(internal erosion) 및 파이핑(piping) 등을 야기함으로서 제방파괴를 유도한다. 침투에 의한 제방파괴는 월류나 침식에 의한 제방파괴 유형보다 상대적으로 적으나, 다른 제방파괴 원인을 더욱 활성화 시키는 인자로 작용한다. 도시하천의 경우 높은 치수안전도를 적용하여 제방을 축조함에 따라 월류에 의한 붕괴보다 강우와 하천수의 복합요인에 의한 침투파괴가 중요한 문제로 대두되고 있다. 본 연구에서는 침투와 활동에 대한 안전성을 확보할 수 있는 침투보강기법인 단면확대기법에 대한 적용성 및 유의사항을 수치모의를 통해 검토하였다. 제방 비탈면 경사를 1:2 확대할 경우, 침투유속이 70 %정도 감소되는 것을 확인하였다. 그러나 단면확대기법은 홍수시 통수능과 제내지의 부지 확보 문제 등을 고려하여 적용하여야 하며, 도시하천에서 단면확대기법을 적용하는 데는 일정부분 한계를 가질 것으로 판단된다.

• Journal of architectural history
• /
• v.18 no.5
• /
• pp.59-80
• /
• 2009

The purpose of this study is to investigate the history, space structures, blueprint, and techniques of the construction of Nam-hea city walls. Nam-hea city walls were relocated in 1439 from Whagumhun-Sansung(火金峴山城) to the present site, nearby Nam-hea Um.(南海邑) The city walls were rebuilt after they were demolished during Japanese invasion on Korea in 1592 and their reconstruction was also done in 1757. At present, the city walls only partially remained due to the urbanization of the areas around them. A plane form of the City wall is a square, and the circumference os approximately 1.3km. According to the literature, the circumference of the castle walls is 2,876尺, the height is 13尺, and the width is 13尺 4寸. Hang-Kyo(鄕校). SaGikDan(社稷壇), YoeDan(厲壇), SunSo(船所) which is a harbor, as well as government and public offices such as Kaek-Sa(客舍) and Dong-Hun(東軒) existed inside the castle walls. Inside the castle walls were one well, five springs, one ditch, and one pond, and in the castle walls, four castle gates, three curved castle walls, and 590 battlements existed. The main government offices inside castle walls were composed of Kaek-Sa, Dong-Hun, and Han-Chung(鄕廳) their arrangements were as follows. Kaek-Sa was situated toward North. Dong-Hun was situated in the center of the west castle walls. The main roads were constructed to connect the North and South castle gate, and subsidiary roads were constructed to connect the East and West castle gate. The measurement used in the blueprint for castle wall was Pobaek-scale(布帛尺:1尺=46.66cm), and one side of it was 700尺. South and North gate were constructed in the center of South and North castle wall, and curved castle walls was situated there. One bastion was in the west of curved castle walls and two bastions were in the east of curved castle walls. The east gate was located in the five eighths of in the east castle wall. Two bastions were situated in the north, on bastion in the south, one bastion in the south, and four bastions in the west castle wall. The castle walls were constructed in the following order: construction of castle field, construction of castle foundation, construction of castle wall, and cover the castle foundation. The techniques used in the construction of the castle walls include timber pile(friction pile), replacement method by excavation.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.105-135
• /
• 2007

Since now, the study of wooden pagodas in ancient Korea have been proceeded to the site plan, the devices and the goods of sarari containers and the reconstruction. They are based on the result of archaeological excavations and the historical material documents. But the study of the foundations of wooden pagodas have been unsatisfactory. In this paper, the investigations of the wooden pagodas in the Three Kingdoms are proceeded. Through this action, we have checked the method of the foundations, the type and installation of Simchoseok(central base stone) and the erection of Simju(central base pillar). In the result of this study, three types were in the method of the foundations-the construction of the upper on the surface of the earth, the construction of the upper and lower on the surface of the earth. And we know the types of the installation of Simchoseok were the underground-type central base stone and the ground-type central base stoned. The factors of the central base pillars were changed with the rising of central base stones from the lower on the surface of the earth to the surface of the foundation. This change was needed to construct the larger wooden pagodas than the ones of the past. In especially, the large wooden pagodas with the ground-type central base stoned were appeared in the king of Baekje, Muwang(A.D. 600~640). We assume that the method of the construction of larger wooden pagodas like that was forwarded to Silla and Japan.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.86-109
• /
• 2009

Mireuksa Temple was founded during the reign of King Mu of Baekje(AD 600-641). The circumstance of the construction of this temple is documented in "Memorabilia of the Three Kingdoms (Samgukyusa)". The pagoda named stone pagoda at Mireuksaji temple stands outside the main sanctuary of the western area. The south and west sides of the stone pagoda have completely collapsed, leaving only the eastern facade of six of its levels intact. Through the recent discovery of sarira reliquary we can see that the erection of this pagoda was in 639. So owing to accumulation of excavation results about Baekje temple site and vigorous academic exchange, it is possible that architecture of western pagoda at Mireuksaji temple can be understood in connection with the architectural development of wooden pagoda from 6th to early 7th century in East Asia. So this study is on the consideration of building of this pagoda putting first structure of upper part and cross-shaped space in 1st floor. It was considered that the material characteristics as stone could be applied to the temple pagoda architecture of large scale. The results are as follows. First, it had been built in recognition that the outer and inner part of pagoda should be separated. As it is the expression of structural system in temple pagoda architecture of large scale at that time. In pagoda there was a self-erected structure and the members of outer part of it were constructed additionally. Second, in Mireuksaji stone pagoda there is central column with stones. With inner part of pagoda it can be regarded as mixed structural system that constitutes central contral column and inner structural part. And it could be a kind of middle step to more developed structure of whole as wooden pagodas in Japan. Third, as the sarira reliquary was in central column on the first floor, the cross-shaped space could be made. The formation of this space was so on the natural meaning of sarira that the concept as memorial service of graves could be apllied to the pagoda. The style of tomb in Baekje was expressed to the space of 1st floor in pagoda where Sarira had been mstalled. That was not only effective presentation of symbolic space but also easier method in the use of same material.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.57-68
• /
• 2013

Large-scale coastal construction projects, such as land reclamation and dykes, were constructed from the late twentieth century in Yoobu-Do region. Land reclamation combined with the dynamics of tidal currents may have accelerated local sedimentation and erosion resulting in rapid reformation of coastal topography. This study presents the results of the topography changes around Yoobu-Do by large-scale coastal constructions using time-series waterline extraction technique of Landsat TM/ETM+ data acquired from 1998 to 2012. Furthermore, the Freeman-Durden decomposition was applied to fully polarimetric RADARSAT-2 SAR data in order to analyze the scattering mechanisms of the deposited surface. According to the case study, the deposition areas were over 4.5 $km^2$ and distributed in the east, northeast, and west of Yoobu-Do. In the eastern deposition area, it was found that the scattering mechanism was difference from other deposition areas possibly indicating that different types of soil were deposited.