• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.245-248
• /
• 2006

풍력터빈 풍동시험의 경우 모델 축소에 의한 레이놀즈 수 감소가 ?V력터빈 성능에 미치는 영향이 적절히 고려되어야 한다. 본 연구를 통해 수치해석과 축소모델 풍동시험을 통해 모델 축소효과를 파악하여 이를 적절히 보상하는 기법을 개발하고자 한다. 이를 위해 풍력터빈 형상 및 실물모델 시험데이터가 공개되어 있는 NREL Phase VI 모델을 표준모델로 선정하여 수치해석 및 풍동시험을 수행하였다. 풍동시험은 KARI LSWT에서 2006. 10에 수행되었으며, 블레이드 끝단 속도를 실물 모델과 일치시켰으며 시험부 유속은 $0{\sim}25m/s$, 블레이드 설치각은 3도 조건을 기준조건으로 사용하였다. 축소모델 시험결과 최대토크는 약 10% 정도 감소현상을 보이고 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.128-134
• /
• 2007

Combustion performance and characteristics of high-pressure subscale liquid rocket combustors were studied experimentally. Four different models of combustor were considered in this paper. The high-pressure subscale combustor is composed of the mixing head, the water cooling cylinder and the nozzle. One model of the combustors employed regenerative cooling combustor in that the kerosene used for the chamber cooling is burned. This combustor was damaged due to a high frequency combustion instability occurred during a firing test. The results of the firing tests, comparison of performance, and characteristics of static and dynamic pressures of the combustors are described.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1055-1060
• /
• 2020

This study is a study on the analysis and measurement of the radar cross-sectional area of a miniature aircraft. Radar cross-sectional area for miniature aircraft in advance were analyzed using an electromagnetic analysis tool, and an actual miniature aircraft was manufactured and measured in an anechoic chamber. When measuring, the old model was used as reference data for RCS(radar cross section) characteristics and applied to the test result data of the actual reduced model. The measurement method improved the accuracy of the measurement by applying time gating to remove the influence on the components scattered inside the anechoic chamber. The RCS test results of the reduced model showed relatively high RCS characteristics in the microwave band, as the previous analysis results. In the future, we plan to utilize the method of RCS analysis and measurement for the target of the radar in the VHF(Very High Frequency)/UHF(Ultra High Frequency) band with a relatively large wavelength.

• Journal of the KSME
• /
• v.56 no.9
• /
• pp.44-48
• /
• 2016

실제 크기의 로켓엔진은 수많은 예산이 소요되기 때문에 새롭게 설계된 엔진에 대하여 비행모델의 제작 및 실험연구는 예산과 위험성 때문에 매우 제한적으로 시행된다. 따라서 비행모델의 설계를 확정하기 위한 개발단계에서는 실제 크기의 로켓엔진의 특성을 나타낼 수 있는 소형 액체로켓을 제작하여 시험평가를 수행하게 된다. 이 글에서는 이러한 축소형 연소기 관련 연구동향을 알아보고자 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.69-72
• /
• 2011

Hot-firing tests were performed on the third sub-scale gas generator for development of a 75 ton-class liquid rocket engine. This paper deals with the analysis results of low-frequency combustion instabilities that were encountered during combustion tests of the gas generator. The low-frequency pressure fluctuations seem to be related to chamber pressure and pressure drops through oxidizer/fuel injectors.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.5-5
• /
• 1999

3단형 과학로켓(KSR-III)의 기본형 및 응용형에 공통으로 사용되는 주엔진은 액체산소를 산화제로, 케로신을 연료로 사용하는 액체추진기관이다. 엔진 기본설계를 통하여 로켓 임무 요구사항에 부합되도록 엔진 각 부분의 기본제원을 설정하였고, 엔진의 형상을 결정하였다. 설계된 엔진의 성능검증 작업은 분사시험용 엔진, 축소형 엔진, 엔지니어링 모델 및 비행시험모델의 설계/제작/시험을 통하여 순차적으로 수행할 계획이다. 본 연구는 3단형 과학로켓 엔진의 기본설계 및 성능검증 계획에 관한 것이다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1599-1606
• /
• 2011

It is possible to study the load characteristics of full-scale hingeless rotor with the changing of physical smallscaled configurations such as rectangular and paddle blades, and metal and composite hubs. In this study, a static test, and a ground and wind-tunnel test were carried out using small-scale rotor models. The static test was carried out to confirm structural stiffness, characteristics of inertia, natural frequency, and damping ratio of rotors, and the ground and wind-tunnel test was carried out to confirm the stability and aerodynamic characteristics under hovering and forward flight conditions. According to the test results, the vertical load in the case of a combination of a small composite hub with paddle blades was higher than that in the case of a metal hub with paddle blades at same condition. Further, it was confirmed that the restraint of the combination of composite hub can be more flexible than the metal hub for the motion of paddle blades.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.199-202
• /
• 2005

Separation motion of 1:2 downscaled nose fairing is simulated. In comparison with the experimental results, results of analyses on the separation simulation are verified and the characteristics of nose fairing separation are analyzed. The results shows about 5% analysis error.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.225-227
• /
• 2011

The geometrically sub-scaled wall-injection test model was employed to visualize interactions of internal flow of a solid rocket motor equipped fin/slot grain and submerged nozzle. Symmetric vortex and circumferential flow patterns were visualized.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.594-596
• /
• 2010

Hot-firing tests were performed on a sub-scale gas generator for development of a 75 ton-class liquid rocket engine. This paper deals with the analysis results of low-frequency combustion instability that encountered during combustion tests of the gas generator.