• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.359-369
• /
• 2021

In underwater communications, to compensate performance degradation induced from rapidly changing channel transfer characteristic, multi-band communication method which allocate the same data to different frequency bands is used. However, the multi-band configuration may have worse performance than the single-band one because performance degradation in a particular band affects the output from the entire bands. This problem can be solved through a receiving end that analyzes error rates of each band, sets threshold values and allocates lower weights to inferior bands. Therefore, this paper proposed a weighting algorithm based on estimated Bit Error Rate (BER) which analyzes reliability of received data based on the performance difference between demodulated and decoded data. Employing turbo codes with coding rate of 1/3, we evaluate the performance of the proposed weighted multi-band transmission model in real underwater environments based on optimal simulation parameters. Through the sea trial experiment, we confirmed error performance was improved by applying the proposed weighting algorithm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.226-233
• /
• 2012

In this paper, we propose a 'linear approximation method' which is an accelerated BER (Bit Error Rate) test method for high speed interfaces, based on an analytical BER model. Both the conventional 'Q-factor estimation method' and 'linear approximation method' can predict a timing margin for $10^{-13}$ BER with an error of about 0.03UI. This linear approximation method is implemented on a hardware as an accelerated Built-In Self Test (BIST) with an internal BERT (BET Tester). While a direct measurement of a timing margin in a 3Gbps interface takes about 5.6 hours with $10^{-13}$ BER requirement and 95% confidence level, the accelerated BIST estimates a timing margin within 0.6 second without a considerable loss of accuracy. The test results show that the error between the estimated timing margin and the timing margin from an actual measurement using the internal BERT is less than 0.045UI.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.4
• /
• pp.410-418
• /
• 2022

Channel reliability estimation for iterative codes such as turbo codes is very important factor in time varying underwater acoustic channel, an incorrect estimation of channel reliability induced performance degradation. Therefore, this paper presents an optimal channel reliability estimation method for turbo coded FSK signal with rate of 1/3. The estimated BER algorithm is a method that can estimate the reliability of received data by comparing received data and decoded data, and we determine optimal channel reliability by using the method. In order to analyze the performance, the experiment was conducted on a lake in Munkyeong city by moving in the range of 300 m to 500 m. At the result of applying presented method to failed decoding packets, we confirm all packets are decoded successfully.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1031-1037
• /
• 2011

Pilot symbol assisted modulation (PSAM) can be used for the channel estimation in orthogonal frequency division multiplexing (OFDM) transmission systems. However, imperfect channel estimates in PSAM systems degrade the bit error rate (BER) performance. I derive the BER of PSAM OFDM systems over time dispersive fading channels. The BER performance of OFDM systems with SFBC antenna diversity are analyzed, where data is transmitted over time and frequency selective Rayleigh fading channel. The performance of this PSAM SFBC OFDM systems, gauged by the average bit error rate, is analyzed considering the channel estimation error.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.2
• /
• pp.56-60
• /
• 2006

Based on the fact that audio signals in the time domain have the generalized Gaussian distribution. an optimal parameter estimation of the ML (maximum likelihood) test based audio watermark decoder. which leads to the minimal bit error rate, is Proposed. Its superiority of performance over the existing estimation and the conventional correlation based decoder is demonstrated experimentally.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.41-47
• /
• 2005

In this paper, the performances of various channel estimation schemes for DVB-H system are investigated. The linear interpolation, the second order interpolation, the cubic spline interpolation, and the time-domain interpolation, which are used in frequency domain, are chosen as the channel estimation schemes. We derived the performances of Mean Square Error (MSE), Bit Error Rate (BER), and the complexity of calculation in Rayleigh and Rician fading channel through computer simulations. From the simulation results, the cubic spline interpolation shows the best performance under high $E_b/N_0$ environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.5
• /
• pp.983-987
• /
• 2004

Pilot symbol assisted modulation (PSAM) can be used for the channel estimation. However, imperfect channel estimates degrade the bit error rate (BER) performance. I derive the exact BER of 16-level quadrature amplitude modulated (16-QAM) orthogonal frequency division multiplexing (OFDM) systems with PSAM in time dispersive Rayleigh fading channels. In real system, there is 2.5 dB penalty in $\overline{\gamma_b}$for the same BER relative to ideal system with perfect channel estimation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.9
• /
• pp.47-54
• /
• 2004

The previous works for WLAN system based on OFDM is mainly individual study for independent frequency offset or symbol synchronization. In this paper, the performance of IEEE 802.11a WLAN(Wireless Local Area Network) system in the realistic indoor multipath channel models is analyzed with frequency offset compensation and channel estimation methods. For the performance analysis of the WLAN system indoor Rayleigh multipath channels are adopted, and the BER(Bit Error Rate) of WLAN system is calculated with y2 code-rate 16-QAM based on standard specification. From the simulation results, the difference of required Eb/No for BER of 10-3 is 1-2dB between the channel estimation and frequency offset compensation, and perfect channel estimation and no frequency offset.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.243-245
• /
• 2014

본 논문에서는 OFDM(Orthogonal Frequency Division Multiplexing)시스템에서 OFDM 심벌 타이밍 옵셋에 따른 4096QAM 의 uncoded-BER(Bit Error Rate) 및 성상도를 측정하였다. uncoded-BER 은 수신기의 FEC(Forward Error Correction) 복호기 이전에서 측정된 BER 을 의미한다. 측정을 위해, OFDM 을 사용하는 DVB-C2(Digital Video Broadcasting for Cable Systems 2) 송수신기를 FPGA(Field Programmable Gate Array)를 이용하여 구현하였으며, OFDM 심벌의 CP(Cyclic Prefix)를 이용하여 OFDM 심벌 동기를 수행하였다. 일반적으로, OFDM 심벌 동기는 OFDM 심벌에서 CP 가 반복된다는 특성을 이용한 상관기를 사용한다. 또한, ISI(Inter Symbol Interference) 및 ICI(Inter Channel Interference)를 최소화하기 위해, 채널의 최대 지연시간을 고려하여 CP 내에서 OFDM 심벌 동기가 획득된다. 이럴 경우 수신기에서는 각 부반송파에 할당된 QAM 심벌들의 위상 회전이 발생하지만, 등화기에서 이러한 위상 회전이 보상된다. 부반송파에 할당된 파일롯 심벌들을 이용하여 채널 추정 및 보상을 하는 등화기에서, 파일롯 심볼들도 OFDM 심벌 타이밍 옵셋에 의해 위상회전이 발생하기 때문에 채널 추정 값에 영향을 미친다. 따라서, 본 논문에서는 4096QAM 과 ZF-LE(Zero Forcing Linear Equalizer)를 사용한 경우, OFDM 심벌 타이밍 옵셋에 따른 uncoded-BER 및 성상도의 측정 결과를 제시하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1612-1620
• /
• 2003

This papers describes a nonlinear transfer function modelling of designed GaAs FET power amplifier by measured and simulated values of designed PA amplifier for multi­carrier transmission system, With the results of PA nonlinearity characteristic, we can estimates AM­AM and AM­PM of designed PA. According to the estimated nonlinear characteristics, we can analysis the ACPR of PA for spectral regrowth, the error vector measurement(EVM) of constallation signals and bit error rate of QPSK and 64­QAM. The suggested nonlinear modelling results are used to get an accurate estimate of digital characteristics between PA amplifier and wireless multi­carrier transmission system using OFDM.