• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.348-351
• /
• 2001

'Saenara' released by National Horticultural Research Institute in 1997 is a mid-season apple cultivar with attractive red skin, high quality and high productivity. This cultivar originated from the cross between 'Spur EarliBlaze' and 'Spur Golden Delicious' at Suwon in 1981. It was first selected in 1992 and named 'Wonkyo Ga-08'. The regional adaptability test was carried out for 5 years from 1993 to 1997 at 7 different sites. 'Saenara' is medium in tree vigor and has a spreading tree form. It bears abundant flower buds on many spurs. It blossoms a day earlier than 'Spur Golden Delicious', 3 days later than 'Spur EarliBlaze'. Harvesting time of 'Saenara' is September 10, 140 days after full bloom at Suwon. Fruit shape is conical and skin color is bright red. Fruit weighs about 300 g and has $14.6^{\circ}Brix$ soluble solids content. It is susceptible to alternaria leaf spot (Alternaria mali Roberts).

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.3
• /
• pp.217-227
• /
• 2002

Geostatistical methods were used for the groundwater flow analysis on the ${\bigcirc}{\bigcirc}$ tunnel area. Linear regression analysis shows that the topographic elevation and ground water level of this area have very high correlation. Groundwater-level contour maps produced by ordinary kriging and cokriging have little differences in mountain areas. But, comparing two maps on the basis of an elevation contour map, a groundwater-level contour map using cokring is more accurate. Analyzing the groundwater flow on two groundwater-level contour maps, the groundwater of study area flows from the north-west mountain areas to near valleys, and from the peak of the mountain to outside areas. In the design steps, the groundwater-level distribution is reasonably considered in the tunnel construction area by cokriging approach. And, geostatistics will provide quantitative information in the unknown groundwatrer-level area.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.3
• /
• pp.261-275
• /
• 2012

This paper presents numerical analysis of the mud cake infiltration behaviour which is influenced tunnel face stability during excavation by slurry shield TBM. This analysis method can make useful data to select proper shield TBM type and to set up the construction plan. But effective analysis did not proposed until now. In this paper, we carried out numerical analysis using by $PFC^{2D}$ fluid coupling simulation which is suitable for sandy soil modelling. As a analysis result, we checked that the slurry infiltration behaviour varied with soil permeability and slurry characteristic(specific weight, viscosity etc). This analysis method is helpful safety excavation through anticipating the proper slurry viscosity at the design stage and verifying the slurry quality at initial excavation stage.

• Environmental and Resource Economics Review
• /
• v.16 no.4
• /
• pp.803-832
• /
• 2007

Electricity and heat load profiles by use types on an hourly basis at the least are essential for assessing economic viability of new cogeneration and CES projects and for optimally operating existing cogeneration and CES facilities. We adopt a multilevel model to specify heat load profiles so as to utilize in a flexible manner the panel nature of our data on weather and heating/cooling use. Converting the multilevel model to the linear mixed-effects model, we estimate the model by panel FGLS. The estimated load profile model for each distinct use type accounts for the effects of temperature, humidity, each hour over the year, each day of the week, each type of legal holidays, and heating/cooling area on energy use. To save space, we feature in detail the heating profile of the household.

• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.47-51
• /
• 2013

In this study, we carried out an experimental shield TBM excavation model test using a down-scale device in soft clay, to understand tunnel-face stability properties in relation to changes in slurry pressure. We performed five tests according to tunnel depth (0.5D, 0.75D, 1.0D, 1.25D, 1.5D), and compared theoretical tunnel-face pressure with model test results. The range in theoretical tunnel-face slurry pressure ($P_{min}{\leq}P_{slurry\;pressure}{\leq}P_{max}$), which is determined by earth pressure and water level, was very similar to the model test result. This result was due to the more isotropic condition of the soft clay ground, than of rocky ground.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.3
• /
• pp.197-204
• /
• 2006

A large sectional tunnelling method using Shield TBM is expected to be popular as domestic demand of long tunnel gets growing. Although a shield tunnelling method has been recognized as prominent method in consideration of stability and applicability in shallow and poor ground, the cases of accident and constructional trouble have been often happened due to unexpected poor ground condition, or selection and use of improper shield machine. Especially, troubling cases at tunnel face are frequently occurred, so supporting pressure control of tunnel face would be the main issue for securing safer and more efficient tunnel excavation using Shield TBM. In this point, we carried out the numerical feed-back analysis to compare the ground deformation pattern with theoretical result at tunnel face.

• Geophysics and Geophysical Exploration
• /
• v.6 no.2
• /
• pp.64-70
• /
• 2003

A new approach of estimating the coefficient of permeability (COP) from resistivity has been developed, which can provide another good application tool of geophysical methods to geo-technical field. Borehole electrical logging and Lugeon test results in Yangsan area showed that resistivity is inversely proportional to the COP. For granite and andesite in Yansan area, the relation between the resistivity ($\rho$) and the COP (k) revealed that, $log(k){\approx}-0.85621\;log({\rho})+0.0031$. Derived relation is applied to AMT data acquired from a survey line along the tunnel. Two-dimensional resistivity distribution from AMT data was converted to two-dimensional COP section. The final COP section can be used as good input data for groundwater modeling.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.2
• /
• pp.101-111
• /
• 2004

In order to guarantee the stability of a tunnel and its optimum design, it is very important to obtain enough ground investigation data. In realty, however, it is not the case due to the limitation of measuring spatially distributed data and economical reasons. Especially, there are regions where drilling is impossible due to civil appeal and mountainous topology, and it is also difficult to estimate rock mass classes quantitatively with only geophysical exploration data. In this study, therefore, 3 dimensional multiple indicator kriging (3D-MI kriging), which can incorporate geophysical exploration data and drill core data off a tunnel center line, is proposed to cope with such problems. To this end, two dimensional mutiple indicator kriging, which is one of the geostatistical techniques, is extended for three dimensional analysis. Also, the proposed 3D-MI kriging was applied to determine the rock mass classes by RMR system for the design of a Kyungbu express rail way tunnel.

• Korean Journal of Community Nutrition
• /
• v.21 no.2
• /
• pp.131-139
• /
• 2016

Objectives: The present study was conducted to investigate associations between eating style and food intake of 45 female college students during Chuseok holidays. Methods: A ten-day food record was obtained and divided into two parts. The first five days (September 20-24, 2015) were considered as a 'Normal Day (ND 1-5)' and the subsequent five days (September 25-29) as 'Holiday (HD6-10)'. The middle three days (September 26-28) of the holidays were considered as the 'Peak Holiday (PD7- 9)'. Eating behaviors were measured using the Dutch Eating Behavior Questionnaire (DEBQ) and anthropometry was assessed in all study participants. Participants were grouped by cluster analysis according to the mean energy intake of the first three days of the Holiday. Results: Participants had a low-normal range of BMI and they were carefully restricting their food intake at Normal Day. Even the food intake did not exceed 2000 kcal per day during the Peak Holiday. External eating was the most prevalent type of eating behavior, followed by restrained eating and emotional eating. Normal energy and fat intake were correlated with the external eating subscale of the DEBQ. Restrained eating was associated with the weight, BMI, fat mass, waist, and hip girth of the subjects. Compared to the Normal Day, they overate during the Holiday with different eating styles including 'restraint', 'disinhibition', and 'fluctuation'. Therefore, neither eating behaviors nor anthropometry was associated with food intake during the Holiday. Although eating behaviors and anthropometric measures were not different among eating style clusters, the food intakes of disinhibition cluster were higher than those of restraint cluster during all the study periods. Conclusions: Subjects can be classified with the restraint, disinhibition, and fluctuation clusters. However, eating behaviors and anthropometry were not different among three clusters.

• KSBB Journal
• /
• v.8 no.4
• /
• pp.341-350
• /
• 1993

As an effort to develop an alternative transportation fuel, the production of methanol from methane gas was studied using the resting cells of an obligatory methanotroph, Methylosinus trichosporium OB3b. The reaction was carried out in high concentration phosphate buffer solutions with the flask-grown cells containing the exclusively cytoplasmic methane monooxygenase (sMMO) activity. The methanol accumulation rate was observed to be 79nmo1/mg·min during the initial 4.5hr. Phosphate-dependent inhibition was found for both sMMO and methanol dehydrogenase (MDH) activities, and the inhibition constants were 185mM and 42mM, respectively. The inhibition mode was noncompetitive. Methanol was found to be very inhibitory to the sMMO activity and the inhibition constant (noncompetitive) was 21mM when propylene was used as substrate. The sMO activity in the resting cells was declined very fast and the rate became very high during the methanol production. These results indicate that the use of M. trichosporium OB3b as a biocatalyst for the methanol production is heavily dependent on the stable maintenance of the whole-cell SMO activity as well as the effective alleviation of product inhibition.