• Bulletin of the Korean Space Science Society
• /
• 2006.10a
• /
• pp.162-162
• /
• 2006

• Journal of Korea Ship Safrty Technology Authority
• /
• v.15
• /
• pp.17-30
• /
• 2004

중, 소형 선박의 추진시스템은 주 동력원인 4행정 디젤엔진, 프로펠러의 추진 효율을 증대시키기 위한 감속장치, 진동 및 충격토크를 절연시키는 탄성커플링, 동력을 전후방향의 추력으로 전환하는 추진기로 구성되어 있다.<중략>

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.162-170
• /
• 2005

In KSLV-I, actuation system for thrust vector control of kick motor was configured as electro-hydraulic servo actuation system and consisted of actuators, hydraulic power supply system, hydraulic power distribution system and control system. In case of hydraulic power supply system, we use EMDP(Electric Motor Driven Pump) to supply hydraulic power. Generally, we use brushed DC motor for EMDP but it is not easy to operate EMDP using brushed DC motor at a high altitude. Hence, we are developing EMDP using brushless DC motor to use at a high altitude. In this study, we will explain control system for BLDC motor to drive hydraulic pump.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.12
• /
• pp.1095-1102
• /
• 2016

This paper presents the results of the design, fabrication and tether test for a gross weight 20 kg tilt-duct VTOL aerial robot. The tilt-duct vehicle, a tri-ducts air-vehicle, which composed of two main tilt ducts for thrust and an aft-fan for pitch attitude control, has been developed as an aerial platform. The research on the air vehicle has been focused on the hover characteristics and controllability to improve the thrust and stability. The tether test for measuring various performance of vehicle and evaluating controllability have been carried out to figure out effects of modified main-prop linkage, actuator, duct configuration and control surfaces.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.12
• /
• pp.48-53
• /
• 2005

In this paper, we present our recent progress in the LIPCA (Lightweight Piezo-Composite Actuator) application for actuation of a flapping wing device. The flapping device uses linkage system that can amplify the actuation displacement of LIPCA. The feathering mechanism is also designed and implemented such that the wing can rotate during flapping. The natural flapping-frequency of the device was about 9 Hz, where the maximum flapping angle was achieved. The flapping test under 4 Hz to 15 Hz flapping frequency was performed to investigate the flapping performance by measuring the produced lift and thrust. Maximum lift and thrust were produced when the flapping device was actuated at about the natural flapping-frequency.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.97-102
• /
• 2004

Propulsion System provides the required velocity change impulse for orbit transfer from parking orbit to mission orbit and three-axis vehicle attitude control impulse. KOMPSAT-2 propulsion system(PS) is an all-welded, monopropellant hydrazine system. The PS consists of the subassemblies and components such as Thrusters, Propellant Tank, Pressure Transducer, Propellant Filter, Latching Isolation Valves, Fill/Drain Valves, interconnecting propellant line assembly, and thermal hardwares for operation-environment control of the PS. This paper summarizes a development process of the liquid propulsion system from the design engineering up to the test and evaluation.

• Aerospace Industry
• /
• s.108
• /
• pp.66-67
• /
• 2010

수직이착륙, 영어로는 VTOL(Vertical Take-Off and Landing)이라 불리는 기술은 공기역학을 거부한 첨단 항공우주기술이다. 일반적으로 고정익 항공기는 날개에서 발생하는 양력으로 하늘을 날지만 VTOL 항공기는 순수한 엔진 추력만으로 수직으로 이착륙하거나 단거리에서 이륙할 수 있다. 다만 높은 기술적 완성도를 요구하는 만큼 현재까지 실전 배치된 군용기 중 이 기술이 적용된 군용기는 해리어(Harrier)와 V-22 오스프리(Osprey), Yak-38 정도가 고작이다. 수직이착륙 기술에 대해 소개한다.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.95-102
• /
• 2005

This paper introduces the LAE(Liquid Apogee Engine) and station acquisition fuel budget estimation method for the COMS(Communication, Ocean and Meteorological Satellite) of Korea which is planned to be launched in 2008. And the estimation results are also presented. A statistical approach, more specifically, the Monte-Carlo method was employed to have the estimation include the effect of the launch vehicle GTO injection accuracies. A case study was conducted for several potential launch vehicles to compare the fuel requirements.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.11a
• /
• pp.209-212
• /
• 1996

접촉발화성 액체추진제를 사용하는 소형 추진기관의 성능을 확인하기 위해 핵심 부품의 상온 성능 시험 및 추진기관 조립품의 연소성능시험을 실시하여 추력 400 파운드급의 로켓엔진의 설계성능을 확인하였다. 로켓엔진의 성능측정은 요소분사기의 미립화, 혼합성능의 측정을 위한 상온수류시험과 추진기관 조립체의 지상연소시험으로 실시하였으며, 연소성능은 산화제로 질산을 연료로는 아민계 혼합물로 구성된 접촉발화형 이원 액체추진제를 사용하여 가압방식에 의해 연소실에 분사하는 방법으로 수행하였다. 성능시험결과는 설계성능 및 이상성능과 비교함으로서 이들의 상관관계를 파악하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.16-17
• /
• 2002

재생냉각은 엔진 경량화 및 높은 추력을 발생시킬 수 있으며 엔진이 장시간 작동할 경우에도 추력의 변화가 일어나지 않는 우수성으로 인해, 액체로켓엔진에서 보편적으로 사용되고 있는 냉각방식이며, 고성능 액체로켓엔진 개발에 있어서 핵심기술이다. 일반적으로 재생냉각 방식은 연소기 내벽에 형성된 냉각유로에 연료 또는 산화제를 흘려보내 고온고압의 연소실내에 온도 경계층을 생성시키면서 벽면온도를 적정온도 이내로 유지하는 것이 목적이며, 또한 냉각유로에서의 압력강하가 추진제 공급 시스템의 공급 압력의 한계값을 넘어서지 않도록 하며, 냉각후의 연료 또는 산화제의 열역학적 상태가 엔진 작동 조건에 적합하도록 제어하여야 한다.