• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.42-45
• /
• 2012

As a basic research for the development of Korean lunar lander, propulsion system development for ground test is in progress. Design target is 220 N in ground thrust at 130 g/s flow rate, 200 psi chamber pressure. For the performance improvement, two type injector and catalyst bed was designed. For ground test, thrust measurement system using LM guide was developed and test was performed. The result shows 214.1 N thrust in atmosphere condition at 126.6 g/s flow rate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.110-116
• /
• 2012

To analyze flow characteristics and performance of the side jet thruster with 4 shutters and rectangular nozzles, a 3-D simulation has been implemented. Numerical calculations for three rotation anlgles of the shutter, have been conducted. Internal recirculation in a chamber and asymmetric flow structure in a nozzle were observed. In addition, the more shutter rotated, the more asymmetries of flow increased, and this phenomena resulted in thrust bias. The degrees of thrust bias and thrust performance with the rotation angles of the shutter were predicted and comparisons with theoretical thrust were made.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.6
• /
• pp.30-37
• /
• 2013

A ground hot-firing test was conducted to take out the optimal design configurations for the catalyst bed of liquid-monopropellant hydrazine thruster which could be used for primary engine or attitude control thruster of space vehicles. Performance characteristics with the variation of thrust-chamber length are investigated in terms of thrust, specific impulse, chamber pressure, characteristic velocity, and hydrazine decomposition rate. Additionally, the correlations between propellant-supply pressure and performance parameters are given. As results, increase of catalyst-bed length leads to performance degradation in this test condition, and also decreases propellant consumption efficiency with the supply pressure variation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.151-154
• /
• 2007

The purpose of this study is to identify the basic concept of thruster design through the visualization firing test on a hydrazine thruster. We designed the visual catalyst bed on the basis of the 1lbf hydrazine thruster for a low earth orbit satellite and observed visually the internal catalyst bed reaction.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.97-105
• /
• 2002

The mission life of a satellite determines the amount of fuel required on-board, while the total mass requirement limits the fuel to be loaded. Hence, for the design of thruster control loop, not only the satellite pointing accuracy but the saving of fuel is to be considered. In this paper, a two-step fuzzy controller is proposed for the thruster control loop to save fuel consumption. This approach combines requirements for pointing control accuracy with minimum fuel consumption into a fuzzy controller design. To demonstrate this approach, we have designed a fuzzy controller for the Sun Pointing Mode of KOMPSAT-1. The performance of this fuzzy controller design is compared with that of PD controller used for KOMPSAT-1.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.1
• /
• pp.104-112
• /
• 2003

This paper introduces a thruster attitude control system for the KSR-III and addresses system configuration, design condition for several components and development systems. These systems were confirmed through environmental tests, compatibility tests with other sub-systems and are planned to launch by this year. After the launch test, it can be redesigned for optimal systems using post-analysis.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.45.3-46
• /
• 2009

홀 추력기는 비교적 간단한 구조와 작은 크기 및 높은 연료효율로 미래 소형위성의 핵심기술로 주목 받고 있다. 이 연구실에서는 2010년 발사예정인 과학기술위성 3호에 탑재할 소형위성용 저 전력 홀 추력기를 연구 개발하였다. 성능에 가장 큰 영향을 미치는 자기장 구조는 FEMM전산코드를 이용한 해석을 통해 설계되었으며, 제작된 프로토타입의 실험을 통해 자기장의 세기 및 모양, 양극전압 및 기체유량에 따른 성능 특성을 관찰하였다. 또한 Faraday Probe와 Retarding Potential Analyzer (RPA), 랑뮈어 탐침 등을 이용해 이온빔의 분사각도 및 전류밀도, 이온에너지 분포, 플라즈마 전위 등을 측정하고 관찰된 특성을 물리적으로 분석하였다. 이러한 최적화 과정을 통해 설계된 비행모델의 시험 결과 양극전력 200 W, 제논 연료유량 0.85 mg/s 을 통해 11.2 mN 추력, 1350 s 비추력, 37% 추력효율을 획득하여 개발목표를 상회하는 만족할만한 결과를 얻었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.9
• /
• pp.72-79
• /
• 2004

A method for thruster fault diagnosis for launch vehicle upper stage was developed. In order to protect the launch vehicle against the occurrence of faults, it is necessary to detect and identify the fault, as well as to reconfigure the controller of the vehicle. Considering the upper stage launch vehicle using reaction control system, an analytical method was adopted in order to detect the fault occurred in thruster. The fault detection scheme can be applied to the system regardless of the form of thruster fault occurred - leakage or lock-out. Results from processor-in-the-loop simulation are provided to demonstrate the validity of this fault detection and isolation scheme for the upper stage launch vehicle.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.139-142
• /
• 2011

A water-flow test for acceptance verification is carried out for a nonimpinging-type injector prior to the design-performance verification of hydrazine thruster under development. The injector used in the experiment is to be equipped on the hydrazine thruster producing 70 N of nominal thrust at an inlet pressure of 24.6 $kg_f/cm^2$. It is observed that there exist varying characteristics of atomization among the injector-nozzle orifices caused by a fabrication error which can be judged from a microscopic standpoint. On the other hand, all of the injector orifices are placed within the design criteria in an injection-angle performance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.167-174
• /
• 2011

Solid propulsion systems have simple structures compared to other propulsion systems and are suitable to long-term storage. However the systems generally have limits on control of thrust levels. In this paper we suggest control algorithms for combustion chamber pressure of variable thrust solid propulsion systems using special nozzles such as pintle valve. For this we use a simple pressure change model by considering only mass conservation within the combustion chamber, design a classical algorithm and also a nonlinear controller using feedback linearization technique. Derived thrust equation and designe a thrust control model. We design the proportion-integral controller for linearizing about operating point. We also demonstrate the performance of controller model through numerical simulations.