• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.129-135
• /
• 2000

Air-dynamic bearings are increasingly used in supporting small high-speed rotating bodies. This study investigates the effects of design parameters on the axial stiffness of spiral-grooved air bearings of various curvatures. Design parameters are fundamental clearance, groove depth, and bearing number. The pressure distribution at the clearance between the stator and rotor of the bearing is obtained by solving the Reynolds equation, and the supporting load and the axial linear stiffness are calculated from the pressure distribution. It is found that a larger curvature increases the axial linear stiffness more and that there exist an optimal groove depth for the linear stiffness of the air bearing. It is also found that the linear stiffness has a linear relationship with the bearing number.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.507-509
• /
• 2000

This study developed the window based power flow analysis software for distribution system. This system was developed by using Visual C++ 6.0 in Microsoft Windows 98 environment; therefore, it utilized many advantages of window based programming for providing user-friendly interface. The backward/forward sweep algorithm is implemented in this software for power flow analysis. Especially, this software includes the newly developed classes of complex function, matrix function, and power flow calculation procedure, so it has high flexibility for enhancement and modifications.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.147-149
• /
• 2000

This paper describes a power flow method for distribution systems, applying the method of symmetrical component to back/forward sweep method. The proposed algorithm is effective for unbalanced radial distribution system, with process of distributed resource(PQ & PV node), AVR(Auto Voltage Regulator), shunt capacitor. This proposed method compared conventional back/forward sweep method with the using three phase unbalanced distribution systems with 34 nodes.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.713-716
• /
• 2007

사용자의 지리적 위치에 기반한 서비스를 제공하는 위치 기반 서비스는 유비쿼터스 컴퓨팅의 중요한 응용이 되고 있으며, 이와 관련하여 다양한 연구들이 계속 진행 중이다. 기존의 연구들이 사용자의 위치 정보와 해당하는 서비스들의 단순 연결에 불과했다면, 본 논문에서는 사용자와 디바이스 간의 상호작용 정보를 기반으로 병합적 클러스터링 알고리즘을 이용하여 사용자의 위치에서 가장 적합한 지능적인 서비스를 제공하는 알고리즘을 제안한다.

• Korean Journal of Bronchoesophagology
• /
• v.17 no.2
• /
• pp.108-111
• /
• 2011

Epiglottic cysts cause stridor mimicking asthma and hinder intubation in surgery. A huge cyst can obstruct the airway, making laryngeal examinations impossible. Before surgery, complete visualization of the larynx is necessary for the successful excision of a cyst. If laryngeal examination fails, computed tomography (CT) scanning can provide detailed information. Virtual endoscopy based on CT data reconstruction can yield a detailed three-dimensional image of the larynx. Here, we report two cases of epiglottic cysts along with virtual endoscopic findings and surgical photographs.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1241-1244
• /
• 1996

This paper present a performance evaluation method for Timed Place Petri Nets modeled by Live-and-Bounded Circuits (LB-circuits) through a bottom-up approach. The method can handle the case for the nets having common resources(CR). The target system is divided into the sub-systems by disconnecting the common Transition-Transition-Path(TTP) or Place-Place-Path (PPP) between sub-systems. The common PPP pattern is classified into Parallel Common Resource (PCR) and Sequential Common Resource (SCR) in detail for handling common resources. We evaluate the performance of each divided sub-system, and calculate the sub-systems affect on the performance of the whole system. The facts are generalized as a theorem. The developed theorem are applied into the performance evaluation of an automated assembly system shown in an example. All the results are verified by simulation.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1440-1443
• /
• 1999

This paper proposes fault detection method using a neural network & fuzzy logic on distribution lines. Fault on distribution lines is simulated using EMTP. The pattern of high impedance fault on pebbles, ground and short-circuit fault were take as the learning model. In this paper proposed fault detection method is evaluated on various conditions. The average values after analyzing fault current by FFT of even odd harmonics and fundamental rms were used for the neural network input. Test results were verified the validity of the proposed method

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2597-2599
• /
• 2004

The high quality power is consisted with uniform frequence, no interruption and uniform voltage. In these components, the voltage of the distribution systems affects making economic distribution facility and improving power quality. This paper describes on the voltage apportion rates of the distribution systems in KEPCO.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.591-596
• /
• 1995

In order to investigate the reduction of NO emissions, natural gas was fueled for two-stage combustion apparatus. NO and CO emissions were described by five variables: total air ratio, primary air ratio, secondary air injection position, secondary air injection velocity, and swirl ratio. It was mainly observed that, as the primary air ratios of 0 and 0.4 NO emission decreased with increasing the secondary air injection position and secondary air injection velocity. The effect of weak swirl on NO emission was found to be insignificant.

• Journal of computational fluids engineering
• /
• v.2 no.1
• /
• pp.129-137
• /
• 1997

We consider long nonlinear waves in the two-layer flow of an inviscid and incompressible fluid bounded above by a free surface and below by a rigid boundary. The flow is forced by a bump on the bottom. The derivation of the forced KdV equation fails when the density ratio h and the depth ratio ρ yields a condition 1＋hρ=(2-h)((1-h)²＋4ρh)/sup 1/2/. To overcome this difficulty we derive a forced modified KdV equation by a refined asymptotic method. Numerical solutions are given and hydraulic fall solution of a two layer fluid is expressed analytically in the case that derivation of the forced KdV(FKdV) equaition fails.