• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.305-306
• /
• 2001

수온은 개체들의 활성도와 분포를 제한하는 직접적인 요인이며, 에너지 수지에 포함되는 섭이 활동, 대사작용과 성장들을 포함한 대부분의 생리학적 과정들에 영향을 미친다(Fry, 1971). 적온 범위에 대한 변통은 종간 뿐만 아니라 종내에서도 크다. 그러므로 특정한 조건하에 생태적으로나 상업적으로 가치가 있는 종들에 대한 성장 실험(Scope for growth)은 필요하며, SFG는 넓은 범위의 환경상태에 대해서 민감하고, 정량적이며 통합적인 스트레스에 대한 반응을 제공한다. (중략)

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.407-409
• /
• 2001

상용주파 자계와 인체의 건강에 대해서 과학적인 해명 목적으로 Specific Pathegen Free Room을 제작하였다. 환경 실험실의 설치조건 중 자계 노출장 치간의 Stray Field의 영향이 중요하므로 SPF Room을 배치하는 데 있어 각 자계노출장치의 Stray Field로 인한 노출장치의 자계 균일도를 예측 계산하고 그 결과를 바탕으로 최적 배치를 구하였으며 실제 자계 균일도를 측정한 결과 목표한 바와 같이 2%이내임을 확인하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.445-452
• /
• 2002

토목 및 건축구조물에 대한 합리적이고 정확한 설계, 시공은 물론 구조물 시공후의 안전 점검, 보수ㆍ보강 등을 위한 계측은 구조물의 사용성을 항상 최적의 상태로 유지하고 구조물의 공용수명을 연장시키는데 있어 매우 중요하다. 일반적으로 사용단계의 구조물은 시간이 경과함에 따라 초기의 설계, 시공상 오류에 의한 초기결함, 반복하중 그리고 취약한 환경 등 외부 조건에 노출될 경우에는 구조물 본연의 성능을 점차 상실하게 되어 심지어는 인명과 재산권을 위협하는 대형 붕괴사고를 일으키기도 한다. (중략)

• Journal of the KSME
• /
• v.32 no.7
• /
• pp.620-631
• /
• 1992

자동차 중량의 경량화를 위한 몸체의 알루미늄화 추세는 최근 지구환경 보호측면에서도 필수적 이라 볼 수 있으며, 현재 사용하고 있는 강판과 비교하여 제조단가를 낮추고 강판의 스탬핑 성형 및 용접 . 조립라인에서 동등하게 고속 . 대량 생산이 가능한 생산기술을 구축하는 것이 알루미 늄에 의한 경량화를 꾀하기 위해 필요하다. 알루미늄판재의 스탬핑 성형성 확보를 위해서는 냉 연강판 수준의 기계적 성질의 확보, 금형 가공변수에 대한 최적 가공조건 확립과 알루미늄에 적합한 신 가공기술의 개발 등이 금후의 과제이다

• Journal of Soil and Groundwater Environment
• /
• v.12 no.3
• /
• pp.29-35
• /
• 2007

Titanium was oxidized with oxygen plasma and calcinated with rapid thermal annealing for degradation of humic acid dissolved in water. Titania photocatalytic plate was produced by titanium surface oxidized with oxygen plasma by Plasma Enhanced Chemical Vapor Deposition (PECVD). RF-power and deposition condition is controlled under 100 W, 150 W, 300 W and 500 W. Treatment time was controlled by 5 min and 10 min. The film properties were evaluated by the X-ray Photoelectron Spectroscopy (XPS) and X-Ray Diffraction (XRD). From the experimental results, we found the optimal condition of titania film which exhibited good performance. Moreover photocatalytic capacity was about twice better than thermal spray titania film, and also as good as titania powder.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.380-385
• /
• 2008

To perform the navigation functions more efficiently, the navigation menu structure should be provided easy to understand to the driver in the vehicle environment that is restricted by driving workload, According to these conditions, to design better navigation interface, it is important to study on the navigation menu structure that is depend on the screen size and the information width and depth. Therefore, in this study we provided the different menu structures of 7-inch touchscreen LCD and 4-inch touchscreen LCD to the driver respectively in the driving simulator. Then, we compared the preference of each menu structures with the different touchscreen LCD.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.6
• /
• pp.45-52
• /
• 2009

Naphthalene-degrading bacteria Pseudomonas aeruginosa CZ6 isolated from contaminated soil can adhere to crystal naphthalene and produce extracellular polymeric substance. LB, YM and MSM medium were used as culture mediums to investigate the formation of biofilm. Biofilm was developed the most in LB medium by Pseudomonas aeruginosa CZ6. In the culture, strain CZ6 growth was rarely affected by naphthalene concentration. Optimal culture condition was $30^{\circ}C$ and pH 7 at 0.10% substrate and 150 rpm shaking. The effect of culture medium on naphthalene degradation in the two soil slurry system was evaluated. The initial degradation rate of naphthalene was highest in the MSM medium of soil slurry. However, the sorbed naphthalene was rapidly degraded at the LB medium when naphthalene availability in liquid was limited. The results of this study suggest that biofilm formation and extracellular polymeric substance production increased bioavailability of soil sorbed naphthalene.

• The Korean Journal of Mycology
• /
• v.46 no.3
• /
• pp.271-280
• /
• 2018

The ectomycorrhizal basidiomycete Tricholoma is one of mushroom groups that cannot be cultivated artificially. To use this mushroom as applicable resource for food production, it is necessary to obtain information about their mycelial growth properties in various environmental conditions. This study investigated the mycelial growth of four domestic isolates of Tricholoma species (T. bakamatsutake, T. fulvocastaneum, T. matsutake, T. terreum) at different physical and chemical conditions. The optimal physical conditions for their mycelia growth were found to be a temperature range of $20{\sim}25^{\circ}C$ and a pH range of 4.0~7.0 in dark condition. The growth of T. matsutake was retarded at high temperature ($30^{\circ}C$). Tests to determine the chemical factors that affected mycelial growth showed that the four Tricholoma spp. grew 1% saline. T. matsutake grew in up to 2% saline. In the presence of various heavy metals (50 ppm) and pesticides (suppliers' recommended concentration), mycelial growth was inhibited the most by cadmium and emamectin benzoate, respectively. However, all the four Tricholoma spp. grew with $Cu^+$. The growth of T. matsutake was not inhibited by abamectin, acetamiprid, and thiacloprid. Extracellular enzyme activities of amylase and ${\beta}$-glucosidase were detected only in T. bakamatsutake and T. fulvocastaneum. The results of the present study allowed us to determine suitable or harmful environmental conditions for the mycelial cultivation of the Tricholoma spp.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.14-24
• /
• 2006

To develop small-scale sewage treatment apparatus for detached house of agricultural village, a small-scale sewage treatment apparatus by natural purification method that consisted of aerobic and anaerobic bed was constructed. To reduce the area of a sewage treatment apparatus, four different fitter media were used and each filter medium was coarse sand, broken stone, steel slag, and mixed fitter media (coarse sand : broken stone : steel slag = 1:1:1). The efficiency of sewage treatment according to the depth of aerobic and anaerobic bed and the volume ratio of aerobic to anaerobic bed were investigated in small-scale sewage treatment apparatus. The removal rate of pollutants according to the depth of aerobic and anaerobic bed in small-scale sewage treatment apparatus was high in the order of 50 cm < 70 cm < 90 cm. The removal rate of pollutants according to the ratio of aerobic to anaerobic bed in small-scale sewage treatment apparatus was high in the order of 1:1 < 1:2 $\fallingdotseq$ 1:3. Under the optimum conditions, removal rate of BOD, COD, SS, T-N and T-P were $98{\sim}99,\;95{\sim}97,\;99,\;65{\sim}66\;and\;96{\sim}99%$ respectively, in small-scale sewage treatment apparatus.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.552-560
• /
• 2013

In this paper, an optimization algorithm for the block assembly accuracy control assessment is proposed with consideration for the current block assembly process and accuracy control procedure used in the shipbuilding site. The objective function of the proposed algorithm consists of root mean square error of the distances between design and measured data of the other control points with respect to a specific point of the whole control points. The control points are divided into two groups: points on the control line and the other points. The grouped data are used as criteria for determining the combination of 6 degrees of freedom in the registration process when constituting constraints and calculating objective function. The optimization algorithm is developed by using combination of the sampling method and the point to point relation based modified ICP algorithm which has an allowable error check procedure that makes sure that error between design and measured point is under allowable error. According to the results from the application of the proposed algorithm with the design and measured data of two blocks data which are verified and validated by an expert in the shipbuilding site, it implies that the choice of whole control points as target points for the accuracy calculation shows better results than that of the control points on the control line as target points for the accuracy of the calculation and the best optimized result can be acquired from the accuracy calculation with a fixed point on the control line as the reference point of the registration.