• Journal of Climate Change Research
• /
• v.2 no.2
• /
• pp.115-131
• /
• 2011

Out of all the possible actions that can be taken to respond to greenhouse gas reduction, including development of greenhouse gas reduction technology, infrastructure, actions to improve energy saving and efficiency, and offset with carbon emission reductions (CERs), this study shall focus on the investment on CERs. This study will take a look at risks involved with investing in CERs such as UN registration refusal risk and CERs price fluctuation, and will design risk management model which shall be verified. The goal of this paper is to provide optimized CERs investment strategies for different types of investors, such as general trading companies seeking for investment opportunities and financial companies with plans for green products development and investment by preparation for carbon market. It is expected that the global competitiveness of domestic financial companies shall be improved by taking actions on carbon market instead of previous passive response to climate change and that Korea, the number two Carbon Emissions supplier and number one derivatives market in terms of volume, shall be able to lead the worldwide carbon market.

• Journal of Climate Change Research
• /
• v.2 no.3
• /
• pp.175-189
• /
• 2011

In this research, we describe the methodology and the quantification about GHG reduction effects, expected by optimization of operation mode according to establishing additional heat storage system of Bundang Combined Cycle Power Plant. As an intermediate form of General Combined Cycle Power Plant and Heat supply only district heating plant, Bundang Combined Cycle Power Plant(and Ilsan, Anyang, Bucheon) is possible to satisfy demand for the electrical load and thermal load capacity at the same time through changes to the operation mode itself. Therefore, through the operating transition of high-efficiency mode that the condenser cooling water is recovered and supplied to district heat and cooling, establishing additional heat storage system have flexible supply ability at the power and heat market. In this research, We calculated using the operating performance for the last three years(2008~2010) and efficiency of each mode-specific values. As a result, GHG reduction effects were calculated as $97.95kg_{-}CO_2/Gcal$ per heat energy 1 Gcal supplied at the heat storage system and we expected emmision reduction effect about $13,500Ton_{-}CO_2/yr$.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1006-1011
• /
• 2018

This paper proposes a three level buck converter utilizing multi-bit flying capacitor voltage control. The conventional three-level buck converter can not control the flying capacitor voltage, so that the operation is unstable or the circuit for controlling the flying capacitor voltage can not be applied to the PWM mode. Also when the load current is increased, an error occurs in the inductor voltage. The proposed structure can control the flying capacitor voltage in PWM mode by using differential difference amplifier and common mode feedback circuit. In addition, this paper proposes a 3bit flying capacitor voltage control circuit to optimize the operation of the three level buck converter depending on the load current, and a triangular wave generation circuit using the schmitt trigger circuit. The proposed 3-level buck converter is designed in $0.18{\mu}m$ CMOS process and has an input voltage range of 2.7V~3.6V and an output voltage range of 0.7V~2.4V. The operating frequency is 2MHz, the load current range is 30mA to 500mA, and the output voltage ripple is measured up to 32.5mV. The measurement results show a maximum power conversion efficiency of 85% at a load current of 130 mA.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.468-475
• /
• 2019

An end-line flame arrester allows free venting in combination with flame protection for vertical vent applications. End-line flame arresters are employed in various fields, especially in shipping. In flame arresters, springs are essential parts because the spring load and the spring's elasticity determine the hood opening moment. In addition, the spring has to work under a high-temperature condition because of the burning gas flame. Therefore, it is necessary to analyze the mechanical load and elasticity of the spring when the flame starts to appear. Based on simulations of the working process of a specific end-line flame arrester, a thermal and structural analysis of the spring is performed. A three-dimensional model of a burned spring is built using computational fluid dynamics (CFD) simulation. Results of the CFD analysis are input into a finite element method simulation to analyze the spring structure. The research team focused on three cases of spring loads: 43, 93, and 56 kg, correspondingly, at 150 mm of spring deflection. Consequently, the spring load was reduced by 10 kg after 5 min under a $1,000^{\circ}C$ heat condition. The simulation results can be used to predict and estimate the spring's load and elasticity at the burning time variation. Moreover, the obtained outcome can provide the industry with references to optimize the design of the spring as well as that of the flame arrester.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.343-348
• /
• 2019

In this paper, a dual-band antenna is proposed for the autonomous vehicle as well as omni-directional. The proposed antenna operates in the 4G/LTE band (1,710~2,170MHz) and 5G/NR band (3,400~3,700MHz). In order to obtain the dual-band operation, the planar monopole antenna is proposed as the novel structure with single port of the 50ohm. To give the properties of dual-band, an additional antenna element with slit was added to the planar monopole antenna, and then a structural adjustment parameter was optimized for achieving the target performance in bands. The planar monopole antenna in the LTE band acts as the coupled feed for the added parasitic radiator in the 5G NR band. The proposed antenna has $38.5{\times}36.0{\times}1.0[mm^3]$ on a ground with diameter of 96mm. From the fabrication and measurement results, the impedance bandwidth (VSWR<2) of the proposed antenna covers 1,480~2,260MHz (LTE band: 1,710~2,170MHz) and 3,310~3,930MHz (5G NR band: 3,400~3,700MHz). The proposed planar monopole antenna also obtained the measured gain and radiation pattern of omni-directional radiation pattern in the anechoic chamber.

• Composites Research
• /
• v.31 no.6
• /
• pp.421-428
• /
• 2018

In order to optimize the prepreg compression molding (PCM) process, the forming simulation is required to cope with any problems that may be raised during the process. For the improvement of simulation accuracy, the input data of material property should be measured accurately. However, most studies assume that the compressive properties of the prepreg are identical to the tensile properties without quantifying them separately. Therefore, in this study, the in - plane compressive properties of the prepreg are presented to improve the accuracy of the forming simulation. As a result, the compressive modulus of the fibers was measured to be about $10^{-2}$ times lower than the tensile modulus. Also we designed a square-cup mold with a tilting angle of $110^{\circ}$ to simulate the prepreg formability during the high temperature compression mold process. Shear angles were measured at each corner, which were compared with the simulation results. It was observed that the simulation results using the accurate compressive properties of the prepreg showed a similar trend with the experimental results. It was confirmed that the measured data of the in-plane compression property improved the accuracy of the forming simulation results.

• Journal of Industrial Convergence
• /
• v.16 no.1
• /
• pp.21-26
• /
• 2018

The Seaborne Trade Volume accounts for 97% of the total. This means that the port operation management system can improve port efficiency, reducing operating costs, and the manager who manages all operations at the port needs to check and respond quickly when delays of work and equipment support is needed. Based on the real-time location information confirmation of yard automation equipment used the existing system GPS, the real-time location information confirmation system is a GPS system of the tablet, rather than a port operation system that monitors location information for the entered information, depending on the completion of the task or the start of the task. Network configurations also reduce container processing delays by using commercial LTE services that do not have shading due to containers in the yard also reduce container processing delays. Trough introduction of smart devices using Android or IOS and container processing scheduling utilizing artificial intelligence, we will build a minimum delay system with Smart Device usage of container processing applications and optimization of container processing schedule. The adoption of smart devices and the minimization of container processing delays utilizing artificial intelligence are expected to improve the quality of port services by confirming the processing containers in real time to consumers who are container information demanders.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.15 no.5
• /
• pp.64-74
• /
• 2019

Although a non-rigid registration has high demands in clinical practice, it has a high computational complexity and it is very difficult for ensuring the accuracy and robustness of registration. This study proposes a method of applying a non-rigid registration to 3D magnetic resonance images of brain in an unsupervised learning environment by using a deep-learning network. A feature vector between two images is produced through the network by receiving both images from two different patients as inputs and it transforms the target image to match the source image by creating a displacement vector field. The network is designed based on a U-Net shape so that feature vectors that consider all global and local differences between two images can be constructed when performing the registration. As a regularization term is added to a loss function, a transformation result similar to that of a real brain movement can be obtained after the application of trilinear interpolation. This method enables a non-rigid registration with a single-pass deformation by only receiving two arbitrary images as inputs through an unsupervised learning. Therefore, it can perform faster than other non-learning-based registration methods that require iterative optimization processes. Our experiment was performed with 3D magnetic resonance images of 50 human brains, and the measurement result of the dice similarity coefficient confirmed an approximately 16% similarity improvement by using our method after the registration. It also showed a similar performance compared with the non-learning-based method, with about 10,000 times speed increase. The proposed method can be used for non-rigid registration of various kinds of medical image data.

• Korean Journal of Food Science and Technology
• /
• v.53 no.2
• /
• pp.174-180
• /
• 2021

The optimal recipe for manufacturing composite honey-based herbal pills mainly comprising Rubus coreanus powder (RCP), black mulberry powder (BMP), and vitamin C was investigated. Honey-based herbal pills were prepared by mixing these powders, binding them with honey, and then forming a round shape. The experiment was designed based on the D-optimal mixture design, which included 12 experimental points with one replicate for three independent variables as follows: RCP (10~35%), BMP (10~35%), and vitamin C (5~10%). In addition, the dependent variables (total phenolic and flavonoid content and antioxidant activity) were measured and used to optimize the manufacturing conditions. The results showed that high amounts of RCP were correlated with high total flavonoid content, whereas the addition of high amounts of vitamin C resulted in higher antioxidant activity. In conclusion, an optimized formulation for the honey-based herbal pill was found to contain 35% RCP, 10% BMP, and 10% vitamin C.

• Journal of Nutrition and Health
• /
• v.54 no.1
• /
• pp.116-128
• /
• 2021

Purpose: The extraction conditions for bioactive components from peanut shells, which is a byproduct of peanut processing, were optimized to enhance the total phenolic content (TPC, Y1), total flavonoid content (TFC, Y2), and 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity (RSA, Y3). In addition, this study evaluated the anti-obesity effect of peanut shell extract. Methods: Optimization of ultrasonic-assisted extraction (UAE) was performed using a response surface methodology. The independent variables applied for extraction were time (X1: 5.0-55.0), temperature (X2: 26.0-94.0), and ethanol concentration (X3: 0.0%-99.5%). Quadratic regression models were derived based on the results of 17 experimental sets, and an analysis of the variance was performed to verify its accuracy and precision of the regression equations. Results: When evaluating the effects of independent variables on responses using statistically-based optimization, the independent variable with the most significant effect on the TPC, TFC, and RSA was the ethanol concentration (p = 0.0008). The optimal extraction conditions to satisfy all three responses were 35.8 minutes, 82.7℃, and 96.0% ethanol. Under these conditions, the inhibitory activities of α-glucosidase and pancreatic lipase by the extract were 86.4% and 78.5%, respectively. Conclusion: In this study, UAE showed superior extraction efficiency compared to conventional hot-water extraction in the extraction of polyphenols and bioactive materials. In addition, α-glucosidase and pancreatic lipase inhibitory effects were identified, suggesting that peanut shells can be used as effective antioxidants and anti-obesity agents in functional foods and medicines.