• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.1024-1031
• /
• 2012

In the past, the part of development of that is used for the military aviation target or reconnaissance is being extended to the range of application not only reconnaissance but also civilian industry as the introduction of the newest IT technology and the technical evolution. The Civilian low-cost UAV that is expected growth at the market of UAV in the world is accelerated to the extended applicability in the fields. However, The UAV study is recently focused on the Link and The Data bus because the main decision of the civilian UAV system configuration is not suitable to determinate the factory of price. In this paper is analysed the UAV data bus through the simulation in same condition both the CAN Bus which used the automobile industry and the MIL-STD-1553B which is used the aviation industry. As a comparison result, we identified that the CAN Bus of conventional configuration is possible to transmit the data without the need for a separate coupler equipment against the MIL-STD-1553B data. Thus, we identified that the CAN bus is capable to apply as a low-cost UAV internal data bus to optimize configuration and weight than 1553B.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.4
• /
• pp.457-463
• /
• 2012

Current refrigerators are designed to have thin doors and walls to facilitate user convenience and increase inner storage space. However, the thin doors and walls gives rise to the problem of dew generation on the outer surface of a refrigerator due to a large critical temperature difference between the outer wall and the room air; So far, an electric heater is commonly used for making the dew to evaporate; in this case, the heater inevitably requires additional electrical power. We propose a new approach to reduce the dew generation in a refrigerator by redesigning the gasket and varying the thickness of the inner case of the refrigerator. The results of simulations performed in this study indicate that the surface temperature in the region where dew was generated was increased by approximately $0.39{\sim}3.07^{\circ}C$ without the use of a heater.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.6
• /
• pp.94-106
• /
• 2012

In recent years, the risks and uncertainties associated with mixed used development in urban regeneration projects which have actively been implemented at home and abroad have been on the rise due to the uncertainties of the initial business plan, difficulty of financing, increase in total cost and schedule delay. To cope with rapid social and economic changes and optimize benefits, a risk-based configuration management process that considers life cycle is required, along with accurate planning in the early stage of the business. In addition, it is necessary to prepare measures that can respond to the evaluation and measurement of the configuration factors in relation to the business process. However, the focus of previous studies on configuration management in the field of construction was mainly on humanities and the sociological aspects such as organization, leadership, ideology and similar concepts. There has been limited research on the process and measurement and evaluation methods for configuration factors required in decision-making on the risks and changes that can occur in the actual project implementation phase. Accordingly, in this study, we defined risk-based configuration factors and developed a process and MECA/3DAM/CII methodology to measure and evaluate these factors so as to carry out systematic configuration management of mixed used development in urban regeneration projects.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.6
• /
• pp.143-152
• /
• 2012

As the Public Procurement Service announced the compulsory of BIM adaption in every public construction from 2016, the importance of BIM is increasing. Besides, automatic code checking takes significance in terms of the quality control for BIM based design. In this study, rule-sets were defined for Act on the Promotion and Guarantee of Access for the Disabled, the Aged, and Pregnant Women to Facilities and Information. Three analytic steps were suggested to shortlist the objective clauses from the entire code; the frequency analysis using project reviews for architectural code compliance, the clause analysis on quantifiability, and the analysis for model checking possibilities. The shortlisted clauses were transformed into the machine readable rule-set definition. A case study was conducted to verify the adaptiveness and consistency of rule-set definitions. In future study, it is required the methodologies of selecting objective clauses to be specified and its indicators to be quantified. Also case studies should be performed to determine the pre-conditions in modeling and to check interoperability issues and other possible errors in models.

• Industry Promotion Research
• /
• v.5 no.4
• /
• pp.55-61
• /
• 2020

In conducting school violence counseling to solve school violence, this study studied the use of school violence counseling to solve school violence by forming a correct peer relationship. Through this study, we can see that peer relations are an important factor in preventing school violence in school violence counseling. The findings are as follows. First, school violence counseling should first protect and heal victims. The primary goal of school violence counseling should begin with consideration for the victims and be placed on the continuation of the victim's right peer relationship. That's how important peer relationships are. Second, not only victims of school violence counseling, but also perpetrators should be included in the list of counsels. In other words, there may be many cases where counseling is usually focused only on the victim. Therefore, the peer relationship can continue even after school violence, so customized counseling is needed not only for victims but also for perpetrators. Third, for school violence counseling, the recovery of peer relations and insight into life are important. Therefore, the focus should be on self-reflection and the restoration of relations between the parties, not on a disciplined or disciplined, controlled perspective. Fourth, we should recognize the importance of peer relations in school violence and activate the 'old counseling program'. Therefore, school violence counselors should optimize their programs by reflecting on-site needs so that they can act as emotional facilitators, problem solvers, and empathic cultural promoters in their roles. In conclusion, school violence counseling should basically be involved in peer relationships. School violence counseling should develop and implement programs focusing on the formation of proper peer relations in order to eradicate school violence.

• Membrane Journal
• /
• v.28 no.2
• /
• pp.83-89
• /
• 2018

Hydrophobic porous PVDF hollow fiber membranes for Membrane Distillation (MD) were fabricated by a combination of thermally induced phase separation (TIPS) and stretching. The purpose of this study is to investigate the shape and operating conditions of the module and the effect of piping size on parallel connection. In the optimization experiment of the vacuum membrane distillation module, the flux decreased as the packing density and length of the membrane in the module increased. When the module was connected vertically, it was confirmed that the nearest to the inlet of the vacuum port was the highest flux. In selecting the size of the header pipe of the module, it was confirmed that the maximum flux is shown when the inner diameter area of the hollow fiber membrane and the inner diameter area of the header pipe are the same. Also, it is necessary to find the optimal linear velocity because the higher the linear velocity in the module, the higher the flux, but the pressure acting on the module also increases proportionally.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.253-254
• /
• 2014

지구온난화 문제는 한국가의 문제가 아니라 인류의 문제로 대두되어 많은 이에대한 많은 연구가 이루어 지고 있다. 지구온난화의 주 대상물질인 화석연료로부터 연소시 발생하는 이산화탄소를 감축하기위한 많은 규제와 노력이 요구된다. CCS(Carbon Capture & Storage)란 화석연료로 부터 연소시 대기 중으로 배출되는 온실가스($CO_2$)를 포집하여 재생 또는 지중, 해양에 저장하는 기술로서 국가녹색성장 핵심기술중의 하나로 분류되며, $CO_2$ 회수방안, 저장, 처리관련 연구를 비롯하여 국내외 적으로 활발한 연구가 이루어 지고 있다. 또한 순산소 연소기술을 통한 $CO_2$ 회수, 처리기술은 연료의 산화제를 공기대신 순도 95% 이상의 고농도 산소를 이용하여 순산소연소를 하며, 이때 발생하는 배가스의 대부분은 $CO_2$와 수증기로 구성되어 있다. 발생된 배가스의 약 70~80%를 다시 연소실로 재순환시켜 연소기의 열적 특성에 적절한 연소가 가능하도록 최적화함과 동시에 배가스의 $CO_2$ 농도를 80% 이상으로 농축시켜 회수를 용이하게 하며, 동시에 공해물질은 NOx 발생량을 10ppM 이하로 줄일 수 있는 기술이다. 천연가스를 생산하는 LNG기지에서 연소에 의한 이산화탄소를 발생시키는 기기로는 수중연소식기화기(SMV ; Submerged Combustion Vaporizer)를 들 수 있다. SMV는 버너를 이용하여 $-162^{\circ}C$ LNG를 $10^{\circ}C$의 LN로 기화시키는 설비로서 특히 동절기에 작동시키며 $CO_2$를 배출시키는 연소기다. 본 연구에서는 수중연소식 SMV에 순산소 연소방식을 적용하여 천연가스와 산소를 연소시키므로서 발생되는 $CO_2$를 LNG냉열을 이용 액체화 시켜 회수하는 연구를 수행하고 있다. 내용중에 수중연 소식 SMV에 대한 순산소 연소기를 개발하는 연구를 수행하였으며, 실제 SMV의 1/10크기, 열량기준 1/900로 모형을 제작하여 실험하였다. 연소기 노즐 은 직경 0.6mm, 배가스가 수조내에서 48개의 노즐을 제작하였다. 실험결과 일정량 이상의 $CO_2$ EGR율이 일정 값 이상이 되면 화염의 길이가 공기/NG 화염 길이와 큰 차이가 없었으며 $CO_2$ EGR율이 100%이상에서는 $CO_2$ EGR율 증가에 따른 화염길이 변화는 크게 나타나지 않았다. CO 배출 농도는 공기/NG 연소의 경우보다 높게 나타났으며, ${\lambda}$가 1.4보다 높은 조건에서는 측정되지 않았다. NOx의 배출 농도는 약 1~8ppm으로 나타났다.

• KSBB Journal
• /
• v.21 no.5
• /
• pp.353-359
• /
• 2006

The purpose of this study is to search the optimal solubilization technology which could be applied to sewage sludge, and is to find the characteristics of biological hydrogen production when the sludge treated by optimal method was used as a sole substrate. As a result of the test, treatment technology mixed with alkali and ultrasonic treatment was very powerful tool for treating sewage sludge with high solubilization, and its ratio and elution rate of organic material was 0.9 and 0.076 $min^{-1}$, respectively. When the sludge treated by above optimal technology was used, 4.4 ml $H_2/g$ VSS of hydrogen was produced. Finally, When the sludge treated by above optimal technology was used, 13.4 ml $H_2/g$ VSS of hydrogen was produced under optimum pH.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.122-134
• /
• 1998

In this review, we describe the electrochemical properties of spinel-type lithium manganese oxides $(Li_xMn_2O_4)$ and their failure modes encountered in 4 V lithium rechargable cells. The long-term cyclability (reversibility) of spinel electrodes is determined partly by the purity, size and distribution of spinel particles, and also by the microstructure of electrode plates. A proper selection of electrolytes is another important task in cyclability enhancements. In the spinel preparation, impurity formation and cation mixing should be minimized. The carbon content in composite cathodes should also be minimized to the extent where the cell polarization does not bring about adverse effects on cell performances. The binder content should be optimized on the basis of dispersion of component materials and mechanical strength of the plates. Cathodic capacity losses arising from solvent oxidation and spinel dissolution can be mitigated by using electrolytes composed of carbonates and/or fluorine-containing lithium salts. The carbon additives may be selected after a trade-off between the cell polarization in composite cathodes and the solvent oxidation on carbon surface.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.232-237
• /
• 2000

Theses studies were made on the mevinolin production from Penicillium citrinum Thom (KCTC 6990) Culture conditions pH temperature carbon sources nitrogen sources mineral sources surfactants and glucose concentration were optimized. The results of glucose concentration and maximum mevinolin production according to incubating time in the flask nearly disappeared after 5 days and appeared after 7 days respectively. temperature and pH conditions of maximum mevinolin production were $24^{\circ}C$ and 3.7 pH respectively. The results of maximum mevinolin production according to the kind of nutrients were as follows. Glucose of carbon sources were 3.5 mg/L. Peptone of nitrogen sources were 3.5 mg/L TEX>$K_2HP0_4$ of mineral sources was 3.8 mg/L Tween 20 of surfactants were 4.5 mg/L Maximum mevinolin productioni of glucose con-centration was 4.0mg/L of glucose 100 g/L In the batch culture Maximum mevinolin concentration was 10.3 mg/L after 8 days. maximum mevinolin specific production rate 0.016 mg/g-hr. These results need to be studied more than ever about temperature pH 야ㅕㅡ and treatment of by-product oil in the batch culture and must do the fad batch from now to increase mevinolin productivity.