• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.495-501
• /
• 2016

The measurement of icing conditions needs to be carried out accurately by the ice detector system of an aircraft. Ice detector systems should be installed in locations not affected by backwash, rotor downwash or moving doors or other equipment. Various analyses were carried out in order to find the proper locations sufficiently far from these interfering effects. In this study, the optimum position of the ice detector was assessed using computer simulation, with respect to different flight modes, flow velocities and the amount and distribution of liquid water around the sensor.

• Journal of Internet Computing and Services
• /
• v.6 no.5
• /
• pp.85-95
• /
• 2005

This study proposes a method of feature point extraction using scale-space filtering and a feature point tracking algorithm based on a texturedness similarity comparison, With well-defined operators one can select a scale parameter for feature point extraction; this affects the selection and localization of the feature points and also the performance of the tracking algorithm. This study suggests a feature extraction method using scale-space filtering, With a change in the camera's point of view or movement of an object in sequential images, the window of a feature point will have an affine transform. Traditionally, it is difficult to measure the similarity between correspondence points, and tracking errors often occur. This study also suggests a tracking algorithm that expands Shi-Tomasi-Kanade's tracking algorithm with texturedness similarity.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.132-137
• /
• 2009

This study has regard to classification by using multi-temporal SAR data. Multi-temporal JERS-1 SAR images are used for extract the land cover information and possibility. So far, land cover information extracted by high resolution aerial photo, satellite images, and field survey. This study developed on multi-temporal land cover status monitoring and coherence information mapping can be processing by L band SAR image. From July, 1997 to October, 1998 JERS SAR images (9 scenes) coherence values are analyzed and then extracted land cover information factors, so on. This technique which forms the basis of what is called SAR Interferometry or InSAR for short has also been employed in spaceborne systems. In such systems the separation of the antennas, called the baseline is obtained by utilizing a single antenna in a repeat pass.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.151-159
• /
• 2011

Due to the Korean government's renewable energy support policy such as the renewable energy utilization building certificate and enlarging the compulsory ratio of investment on the public building, the rooftop photovoltaic projects are expanding rapidly. It is very important for the rooftop photovoltaic projects to analyze the shading effect of the adjacent structures or own facilities. But, the photovoltaic arrangements are planned by the experience of the designers or simple graphic tools. The purpose of this study is to build the process model for optimizing of rooftop photovoltaic arrangement based on three-dimensional geo-spatial information.

• The KSFM Journal of Fluid Machinery
• /
• v.4 no.4 s.13
• /
• pp.22-27
• /
• 2001

The pump/motor selection program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements, and calculates specific speed based on flow rate, total head and rotational speed. Then the calculated specific speed is used to select pump types and speed prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program match very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.171-176
• /
• 2001

The Pump/Motor Selection Program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc.. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements and calculates specific speed based on flow rate, total head and na Then the calculated specific speed is used to select pump types and rpm Prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program matches very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.5
• /
• pp.83-91
• /
• 1997

A reactor vibration monitoring has been performed using neutron noise obtained from excore detectors for the safety operation, Traditionally, the spectral estimator based on Fourier analysis has been widely used in the noise analysis of the reactor system. If the bias is too severe, the resolution would not be adequate for a given application. One major motivation for the current interests in the parametric approach to spectral estimation is the apparent higher resolution achievable with these modern techniques. In considering an unbias, a consistency, an efficency, and a minimum lower bound of the statictic estimation, an AR model is appropriate for noise spectral estimation with sharp peaks but not deep valley. In order to select an appropriate model order, the lag value of autocorrleaton function is applied. Burg method to trace the vibration mode of RPV internal is the most sucuessful.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.123-129
• /
• 1995

본 논문은 차실내 음향 특성 개선 연구로 수행중이며 정상 상태 음향 응답 특성 시험을 통하여 차실내에서 운전자가 듣게되는 음장 특성을 알게 되었고, 라우드 스피커에 대한 음향 특성 시험으로 이러한 차실내 음장의 비평탄성은 라우드 스피커 자체의 문제가 아니라 차실 공간등이 요인에 의한 것이라는 것을 추론할 수 있었다. 배플 상태 및 차량에 장착된 상태하의 라우드 스피커에 대한 임피던스 시험 결과로 임피던스의 장착 부위의 후면 공간이 임피던스 특성 변화를 가져오게 하는 것을 알 수 있었다. 임피던스 시험 결과를 이용하여 라우드 스피커에 대한 모델 매개 변수를 규명할 수 있었고, 이를 이용한 라우드 스피커의 모델 개선이 가능하게 되었다. 또한, 시간 지연 분광법을 이용하여 차실내에서 음향 전파 과정 분석을 할 수 있었고, 이로 인해 운전자가 시간에 따라 다른 음향 응답 특성으로 듣게 되는 것을 알게 되어 향후 음질 개선 연구 수행에 이용될 수 있다. 이러한 방법으로 음이 진행함에 따라 부딪치는 반사면의 흡음 또는 반사 특성을 파악할 수도 있어서 흡음재의 선정 및 라우드 스피커의 장착 위치 및 각도를 선정하는데 이용될 수도 있다. 향후의 연구 방향은 어떠한 음향 패턴이 운전자가 좋은 음향이라고 느끼게 되는지를 규명하는 것, 즉 주관적 평가와 객관적 시험 데이터 사이의 연관성을 확립하는 것과 라우드 스피커 모델링 기법과 차실 공간의 음향 특성을 이용한 차실내 최적 음향 조건을 규명하는 것이 될 것이다.

• Communications for Statistical Applications and Methods
• /
• v.16 no.5
• /
• pp.763-779
• /
• 2009

Sample design is studied to estimate the number of records from singing rooms. The definition of survey population, stratification, sample size and allocation of sample are discussed with using the collected real data. The validity of sample design is testified by the log data collected from online singing room which is sampled with suggested design. Estimation of the number of hitting of off-line singing room is proposed and calculated from the log data collected from sampled off-line singing rooms. The difference of online and off-line singing rooms is analyzed and the method of distribution of singing room royalty is suggested.

• Culinary science and hospitality research
• /
• v.13 no.3
• /
• pp.12-19
• /
• 2007

본 연구의 목적은 한국의 전통음식 중의 하나인 비빔밥의 재료들의 색채 범위를 분석하여 메뉴북에 인쇄되어지는 재료별 색채범위를 제시하고자 하였다. 본 연구의 목적을 달성하기 위하여 다음과 같은 과정을 통해 진행하였다. 먼저 한국의 전통음식에 근거한 비빔밥 사진과 레시피를 확정하였으며, 요리 전문 사진가를 통해 메뉴북에 가장 보기 좋게 인쇄되어질 수 있는 촬영 기준을 선정하였고, 위의 환경에서 비빔밥 사진을 촬영하였다. 세부적으로 3회 정도의 사진 촬영을 한 후 가장 좋은 상태의 사진을 선정하여 이 때 각 재료들의 색채 값을 측정하였다. 색채 범위 측정을 위해서 Lab 값과 CMYK 값을 적용하였는데, Lab 값은 밝기, 붉은색, 황색을 측정하는 값으로 육안으로 표현되어지는 색이며, CMYK 값은 메뉴 북에 인쇄되어지는 색의 값을 의미한다. 본 연구의 결과, 육안으로 보여지는 색깔과 메뉴북에 인쇄되어지는 값이 다르게 보여진다는 결과를 보였다. 최적 상태 각 재료별 인쇄 값은 다음과 같다. 청포묵은 C23 M5 Y8 K0였고, 호박은 C75 M24 Y100 K9였으며, 고사리 C64 M55 Y76 K55였다. 콩나물은 C38 M24 Y55 K1였고, 당근은 C12 M75 Y87 K2였으며, 표고버섯은 C45 M37 Y78 K11였다, 시금치는 C82 M44 Y100 K48였으며, 도라지는 C25 M5 Y24 K0였고, 계란은 C26 M19 Y100 K0였으며, 마지막으로 쇠고기는 C66 M5 Y72 K0였다.