• The Journal of the Acoustical Society of Korea
• /
• v.32 no.3
• /
• pp.199-207
• /
• 2013

In this paper, a $64{\times}8$ channel 1.75D ultrasonic transducer made of piezoelectric single crystals was designed, fabricated, and evaluated. First, a structure of the transducer was selected to be suitable for wiring on a planar array, and components were fabricated to correspond to the structure. Detailed structure of the transducer was designed through finite element analyses. As main performance factors, the crosstalk between neighboring elements was reduced through the control of kerf width and material, and desired frequency bandwidth of the transducer was achieved by designing the optimal thicknesses of the piezoelectric single crystal and matching layers. An experimental prototype of the transducer was fabricated following the design, and its performance was measured. Then the experimental results were compared with those of the finite element analysis, which led to the evaluation of the transducer developed in this work.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.1
• /
• pp.26-33
• /
• 2001

Thrust vector control system is control device which is mounted exit of the nozzle to generate pitch, yaw and roll directional force by deflecting flow direction of the supersonic jet from the nozzle. By obtaining control force, jetvane which is exposed in jet flow is working thermal and aerodynamic load. Axial thrust loss and side thrust is affected by shock patterns and interactions between jetvanes according to jetvane geometry and turning angle. In this study, we designed 6 types of jetvane to evaluate pitch, yaw and roll characteristics of ietvane in supersonic flow, and perform the cold flow test in range of turning angles of jetvanes between $0^{\cire}$ and $25^{\cire}$ by $5^{\cire}$ respectively. Also, calculation is going side by side to analyse flow interaction. Results show that there is no interactions between jetvanes upto turning angle 20$^{\circ}$, chord and lead length ratio is very important parameter to aerodynamic performance and maximum thrust loss is appeard to 17% of axial thrust in roll directional control.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.34-42
• /
• 2005

This paper presents the optimum initial design containing the first and third order properties of the three-group zoom system using lens modules, and the real lens design of the system. The optimum initial design with focal length range of 4.3 mm to 8.6 mm is derived by assigning appropriate first and third order quantities to each module along with the specific constraints required for the system. An initial real lens selected for each group has been designed to match its focal length and the first orders into those of the each lens modules, and then combined to establish an actual zoom system by adjusting the air space between the groups at all zoom positions. The combination of the separately designed groups results in a system which satisfies the first order properties of the zoom system composed of the original lens modules. As a result, by residual aberration correction, we could obtain a zoom system useful in compact digital zoom cameras and mobile phone cameras employing the rear focus method.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.2
• /
• pp.83-88
• /
• 2013

The aqueous two phase system has biocompatibility, because it is physically separated into an immiscible liquid multi-layer induced by incompatibility among hydrophilic components dissolved in the water phase. we have applied this principle to aqueous multi-layer liquid cosmetics and select two representative systems. What it was experimentally obtained was the phase diagrams including a binodal curve, a critical point, tie lines of concentration and tie curves of phase separating volume ratio and phase separating time. From the phase diagrams, we were able to observe existence of the optimum condition to prepare the aqueous multi-layer cosmetics for the systems.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.203-213
• /
• 2011

Time-lapse seismic surveys make repeated seismic surveys at different stages of oil production of a hydrocarbon reservoir to monitor changes in reservoir like fluid saturation. Since the repeatable surface seismic measurements can identify fluid types and map fluid saturations, oil and gas companies can make much more informed decision during not only production but also drilling and development. If time-lapse seismic surveys compare 3D seismic surveys, the time-lapse surveys are widely called as 4D seismic. A meaningful time-lapse interpretation is based on the repeatability of seismic surveys, which mainly depends on improved positioning and reduced noise (if surveys were designed properly through a feasibility study). The time-lapse interpretation can help oil and gas companies to maximize oil and gas recovery. This paper discusses about time-lapse seismic surveys mainly focused on feasibility, repeatability, data processing and interpretation.

• Journal of the Korea Society for Simulation
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2014

A cloud computing is one of a parallel and distributed computing. The cloud computing provides some service for user with virtual resources. However, a user's service request does not show a time pattern. As a result, each resource also shows a different availability at the same time. This difference affects a quality of service (QoS) and a resource selection for users. Therefore, we propose the resource availability-based multi auction model for cloud service reservation and resource brokering system. The proposed system is to select the proper resource provider based on the users' request. The proposal adopts the multi phase of the auction to transact resources. The system evaluates the available factor of each resource on the auction phase, and finally reserves the service on the adaptive queue. The proposed model shows the better performance than other existing method.

• Journal of the Korea Society for Simulation
• /
• v.26 no.2
• /
• pp.31-39
• /
• 2017

This paper analyses the effectiveness of Kill Chain (KC) and Korea Air and Missile Defense (KAMD), also known as the K2 systems, using monte carlo simulation. It is assumed that the K2 systems are consisted with unitary KC and multi-layered (upper-tier and lower-tier) KAMD. And each system has two or three arbitrary weapon systems and its combination makes 12 scenarios. Measures of effectiveness (MOE) of the K2 systems were defined as ratio of eliminated ballistic missiles from total threats. And total cost was calculated by number of weapon launched and its unit cost. MOE and total cost of the K2 systems were estimated using monte carlo simulation with a thousand iteration for each scenario. Cost-effectiveness analysis was performed and the best candidate was selected using fixed effectiveness approach. As a result, the performances of KC are prime factor that affects both effectiveness and total cost of the K2 systems. It is also, acquired proper level of lower-tier KAMD to achieve desired defense effectiveness. For future work, it needs to be performed cost-effectiveness analysis based on practical specification and life cycle cost of weapon systems.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.95-104
• /
• 1999

Use of the ultra thick plate is being continuously increased in large off-shore structures, ships, bridges and skyscraper construction, due to increasingly large-sized steel structures and it seems that this trend will be maintained. But, occurrence of the lamella tearing has been reported in ultra thick plate used for construction. It is reportedly caused by impurities such S(sulfur), P(phosphorus) and others accumulated in the ultra thick plate's centerline in the thickness direction with strip shape or by restraint residual stress caused by the welding. In the ultra thick plate made by continuous casting method, occurrence of lamination is difficult to avoid because of the properties of production procedure. Therefore, with a view to reducing the lamella properties, this report tries tearing in the steel structure in the view of welding strength rather than metallic properties, this report tries to seek the optimum groove and welding procedure by using the computer simulation based on FEM(Finite Element Method).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1154-1158
• /
• 2010

최근 전 세계적으로 GIS (Geographic Information Science) 및 RS (Remote Sensing) 데이터 등 디지털정보의 구축이 급속도로 진행되고 있고, 이들의 발달로 유역에 대한 정확하고 상세한 각종 수문매개변수 수집이 가능하여 유역을 부분유역으로 분할한 기존의 집중형 수문모형보다 유역내의 공간적인 유량변동을 보다 상세하게 고려할 수 있는 격자기반의 분포형 수문모형의 활용도가 높아지고 있다. 유역의 수문특성 및 지형특성을 동일한 매개변수로 적용하기 때문에 유역의 공간적인 수문 및 지형특성을 표현하기 어려운 집중형 모형과 달리 강우-유출해석에 있어서 분포형 모형은 실제 복잡한 유역에서의 유출과정 또는 물질의 수문순환과정을 잘 이해할 수 있고, 어떤 유역의 토지이용형태의 변화가 초래하는 영향과 효과를 사전에 예측할 수 있으며, 신뢰성 있는 과거의 수문자료가 없거나 부족한 유역에서의 유출 계산이 용이하다. 따라서 본 연구에서는 Fortran 90을 개발언어로 사용하여 GIS Data와 위성영상을 활용해 유출량을 모의하는 분포형 물수지 유출 모형을 개발하여 금강 상류유역인 용담댐 유역($930km^2$)을 대항으로 2000~2008년의 일 유출량을 모의하였다. 모형은 크게 3개의 모듈(유출량, 증발산량, 토양수분) 형태로 구성되었으며, 유출량은 강우 전 토양의 저류능을 추적하여 산정하였다. 모형의 결과는 셀별 값을 가지는 분포형으로 출력되며, 유역의 평균 수문자료가 Text file로 출력된다. 민감도 분석을 통하여 최적의 유출 관련 매개 변수를 선정하고 하류의 댐 유입량 자료를 바탕으로 모형의 보정(2001-2004) 및 검증(2005-2008)을 실시하였다. 유출량에 대한 Nash-Sutcliffe 모형효율은 0.78~0.93로 모의치가 실측치의 경향을 잘 표현하는 것으로 나타났다. 유출량 분포도는 강우량을 매우 잘 반영하였으며, 같은 강우조건하에서 토양의 배수조건에 따라 유출이 확연히 다르게 표현되었다.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.211-216
• /
• 2003

Absorption characteristics of hot air-. vacuum-, and freeze-dried ginger powder were investigated. Monolayer moisture content as determined by GAB equation was $0.257{\sim}0.540\;H_2O/g$, showing higher significance than BET equation. Absorption enthalpy was calculated based on different drying methods and water activities. Absorption energy decreased with increasing water activity but was not affected by drying method. Isotherm curves showed a typical sigmoid form. Among models applied for predicting equilibrium moisture content, Caurie model was the best fit model for ginger powder, showing the lowest prediction deviation of $1.2{\sim}5.4%$, followed by Henderson then Bradley models. The prediction model equations for the moisture content were established by in(time), water activity, and temperature.