• Proceedings of the Korean Magnestics Society Conference
• /
• 2016.05a
• /
• pp.13-14
• /
• 2016

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.169-177
• /
• 2018

There is a lot of loss of life due to natural disasters. In particular, flood damage caused by heavy rainfall in urban areas causes serious damage. Therefore, in this study, we conducted a study on the optimal evacuation route for safe evacuation of urban areas. We set up a methodology by reviewing Flo-2D model and A* algorithm. A Flo-2D model was used to derive the hazardous area, and we selected the starting points with many people and suggested ways to select safe evacuation sites. And the route was derived from the starting point to the safe evacuation point by using the A * algorithm. This study could be used not only for evacuation route but also for road maintenance and evacuation facilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2321-2327
• /
• 2015

Three coagulants, alum sulfate(alum), poly aluminum chloride(PAC) and poly aluminum silicate chloride (PASC), were used to remove low to high turbidity and TOC in surface and ground blended water. Laboratory experiments and pilot plant experiments were carried out to evaluate the optimal coagulant and its dosage. To determine the optimized coagulant and its dosage, the turbidity, TOC and pH were measured. The experimental results showed the best removal performance using PASC. The optimal dosage of PASC between 3-20 NTU was found to be 15 mg/L in the jar test. In the pilot test, a 15 mg/L PASC dosage was applied and resulted in the efficient removal of turbidity and TOC between 3.6-27 NTU. The removal efficiency of PASC increased with increasing turbidity and TOC.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.400-404
• /
• 2008

댐 군 연계운영을 위한 기존의 많은 최적화 모형은 경제성에 기반을 둔 단일 목적 함수를 가정함으로써 현실과는 동떨어진 결과를 도출하곤 하였다. 따라서 보다 현실적인 최적화 모형이 되기 위해서는 실제 운영과정을 모사할 수 있도록 적절한 초기 가중치를 부여하여 모형을 구축하고, 상충되는 목적간의 절충안으로 파레토 프런티어(Pareto-frontier)를 제시할 수 있는 다중목적 의사결정 기법이 요구된다. 본 연구의 목적은 댐 군 연계 운영을 위한 최적화 모형으로 소개된 CoMOM(Coordinated Multi-reservoir Operating Model)의 다중목적함수에 적합한 초기 가중치를 도출할 수 있는 시스템을 제안하는 것이다. 본 연구에서는 최적화 모형에 적합한 가중치를 결정함에 있어 댐의 초기저수량과 미래의 예상 유입량과 같은 수문 조건을 감안할 필요가 있음에 주목하였다. 이것은 초기저수량과 미래에 예상되는 유입량이 작을 경우 가급적 저수에 중점을 두고, 그 반대일 경우는 발전방류에 주안점을 두는 것이 바람직하다는 사실에서 추정해 볼 수 있는 가정이다. 따라서 댐의 초기 저수량 조건과 유입량 시나리오의 다양한 수문 조건별로 가장 적합한 가중치를 찾아본 후, 수문 조건을 입력요소로, 최적 가중치를 출력요소로 갖는 신경망 모형을 활용해서 수문 조건에 적합한 가중치를 예측할 수 있는 절차를 제안한다. 이 과정에서 최적 가중치를 도출하는 것이 관건이 될 수 있는데, 이를 위해 전승목 (2008)등이 제안한 DEA기반 순위결정 절차를 활용해서 최선의 파레토 최적해와 이에 대응되는 가중치를 찾아 이를 신경망 모형의 출력요소 값으로 활용하였다. 본 연구에서 제안하는 신경망 모형은 임의의 수문 상황에 대해 이에 적합한 CoMOM의 초기 가중치를 결정해 줌으로써 CoMOM과 같은 최적화 모형의 가중치 선정에 따르는 어려움을 극복하는 데 도움이 될 수 있을 것으로 기대된다.

• Journal of Korea Water Resources Association
• /
• v.42 no.7
• /
• pp.559-569
• /
• 2009

Due to environmental, economical and the other limitations, it has been more difficult to construct new large hydraulic structure such as dam. For this reason, it has been tried to use small hydraulic structure such as washland as alternative of hydraulic facility. Because the flood control effect of small hydraulic structure are affected by runoff volume, hydrograph, storage capacity and weir crest elevation, and design frequency must be predetermined for the design of the hydraulic structure. Multiple washlands will be required to satisfy enough peak reduction effect so that considering washlands as a network, rather than individually, are critical to analysis of flood reduction effect. In this study, new index for determination of optimal location for washlands is presented and the existing model for this determination is modified by adopting the new index. Developed new model is applied to Ansung river basin for examination and the new model shows its' applicability as a decision making criteria for the determination of optimal location for washlands.

• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.775-784
• /
• 2022

In this study, to determine the optimal order of the full-logged I-D-F polynomial equation, which is mainly used to calculate the probable rainfall over a temporal rainfall duration, the probable rainfall was calculated and the regression coefficients of the full-logged I-D-F polynomial equation was estimated. The optimal variable of the polynomial equation for each station was selected using a stepwise selection method, and statistical significance tests were performed through ANOVA. Using these results, the statistically appropriately calculated rainfall intensity equation for each station was presented. As a result of analyzing the variable selection outputs of the full-logged I-D-F polynomial equation at 9 stations in Gyeongbuk, the 1^st to 3^rd order equations at 6 stations and the incomplete 3^rd order at 1 station were determined as the optimal equations. Since the 1^st order equation is similar to the Sherman type equation and the 2^nd order one is similar to the general type equation, it was presented as a unified form of rainfall intensity equation for convenience of use by increasing the number of independent variables. Therefore, it is judged that there is no statistical problem in considering only the 3^rd order polynomial regression equation for the full-logged I-D-F.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.607-611
• /
• 2007

최근 하천변화특성에 대한 조사와 연구 없이 무분별한 하천준설로 인하여 급격한 하천지형 및 환경변화에 따른 하도의 평형, 홍수범람, 하천환경의 변화 등 이수, 치수 및 하천환경에 많은 문제점이 야기되고 있다. 따라서 준설에 따른 하천의 인위적인 손상과 이와 연관된 각종 유역 및 하천의 지배인자와의 상호연관성에 대한 학술적 고찰을 통하여 인위적인 영향을 최소화하고 국내 하천환경에 맞는 하천관리모델과 준설기법개발의 필요성이 제기되고 있다. 이에 따라 본 연구는 $\ulcorner$하도준설에 따른 하천교란 실태 조사$\lrcorner$의 일환으로 기초조사 및 후보지 현장조사 등을 통한 연구대상구간 선정을 위한 계획으로서 기 수행된 골재자원 조사결과 및 하천조사 자료 등의 관련자료 활용을 통하여 최대한 효율적으로 조사를 수행하고 최상의 연구결과 획득과 관련분야의 기술력확보를 꾀할 수 있도록 하는 것이 목적이다. 우선, 연구대상구간 선정기준(안)을 마련하고 후보지에 대한 기초조사 및 현장조사를 마친 후, 선정기준에 따라 연구내용을 최대한 만족시키는 연구대상 구간을 8개 후보지역에 대하여 검토하였다. 하천준설을 수행해 나가며 그 전 중 후의 과정을 모니터링 하여 하상변동 및 생태 환경의 변화를 관찰하고 하천환경 및 물리적 영향을 최소화 할 수 있는 연구결과를 얻기 위한 과업대상구간의 선정에는 하도준설이라는 연구특성을 만족시킬 수 있는 특화된 선정기준에 따른 평가결과, 많은 후보지들 중 낙동강수계의 감천이 최적의 대상지로 선정되었다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.277-286
• /
• 2001

Among the ULSAB methods for the lightweight automobile body, Tailor Welded Blank(TWB) is adopted and the design process is developed for the existing component. Topology optimization conducted to find the distribution of the variable thickness. The number of parts and the welding lines are determined from it. In the detail design, size optimization is carried out to find the optimum thickness of each part and then, the final parting lines are tuned by shape optimization. A commercial optimization software GENESIS is utilized for the optimization processes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.123-130
• /
• 2006

The purpose of the paper is to make the three dimensional road simulation model based on the digital photogrammetry and GIS techniques in the middle of Halla mountain of Jeju island. To do this, we generate DEM (digital elevation model) and digital ortho image using GIS tools such as Arc View, Imagestation and MGE module. In GIS, the overlay map schemes combining of the hill shade, the land slope and aspect were applied. Based on the processes, we can build the best three dimensional road line along the hill side of the island. From the results, we also found that the derived DEM from digital ortho image and the GIS technique were very useful for choosing the best three dimensional road design before the real road construction works in Jeju island.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.48-53
• /
• 2013

Polynomial response surface model has been widely used as approximation model which replace physical or numerical experiments in various engineering fields. Generally, low-order model is used to reduce experimental points required to construct the response surfaces, but this approach has limit to represent the highly non-linear phenomena. In this paper, we developed the method to expand modeling capabilities of polynomial response surfaces by increasing order of polynomial and selecting optimum polynomial basis functions. Genetic algorithm is used to choose optimal polynomial basis functions. Developed method was applied to analytic functions with 1 or 2 variables and wind tunnel test data modeling. The results show that this method is applicable to building response surface models for highly non-linear phenomena.