• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.435-436
• /
• 2007

In general, Single gap transflective FFS display has an in-cell retarder (ICR) between reflective electrode and liquid crystal (LC) layer. Therefore, Operating voltage is highly increased due to this thick dielectric material. But, we also knew the phenomenon that the increasing rate of Vop is different whether the 1st common electrode was composed of plate type or slit type. In this paper, the common electrode in transmissive part was composed of slit type which had less steepness effect of the V op and in reflective part was composed of plate type. The rubbing angle of reflective part can be adjusted properly to match the voltage dependent transmittance and reflectance.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.484-486
• /
• 2004

본 논문에서는 직접조작 방법을 이용하여 대화형 유전자 알고리즘(IGA)의 진화성능을 향상시키고 세대를 반복하면서 다양한 해를 얻을 수 있음을 NK-Landscape를 이용해 분석한다. 또한 NK모델을 이용하여 직접조작의 진화과정을 분석하기 위한 IGA 인터페이스를 생성한다. IGA를 이용한 진화는 특성상 적온 수의 개체와 세대수로 제한되기 때문에 지역해에 빠질 수 있는 문제점이 있다. 이러한 IGA 의 제약사창을 극복하는 방법으로 직접조작을 이용할 수 있으며 이 방법은 사용자가 원하는 개체를 생성할 수 있도록 진화과정에서 유전자를 직접 변경한다. IGA 에서 진화성능의 향상과 다양한 해외 생성을 분석하기 위하여 진화연산자인 교차, 돌연변이와 직접조작 방법의 성능을 비교 분석한다. Kauffman이 제안한 NK-Landscape로 진화과정에서 해공간이 얼마나 "ruggedness" 한지와 다양한 진화연산자에서 어떤 성능을 갖는지 분석할 수 있다 실험을 통해 3D 꽃 디자인 문제에서 NK-landscape기반 IGA인터페이스를 이용하여 IGA 해공간을 분석하고 교차, 돌연변이와 직접조작 방법의 성능을 비교함으로써 직접조작 방법으로 더 빠른 시간에 다양한 최적해를 찾을 수 있음을 알 수 있었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.04a
• /
• pp.633-638
• /
• 2000

인터넷 VPN은 통신비용 절감과 접속 영역의 확장 및 신뢰적인 데이터 통신이 가능하도록 하는 기술이지만 최근 들어 인터넷 사용자의 급성장과 상업화로 인한 멀티미디어 서비스와 실시간성을 요구하는 인터넷 응용서비스를 지원하기 위한 QoS는 만족스럽지 못하다. 인터넷 QoS를 위해 IETF에 제출된 통합서비스는 확장성이 부족한 단점이 있다. 차등서비스 구조는 통합서비스 구조에 비해 확장성이 훨씬 좋아 QoS를 제공하기 위한, 인터넷 백본망에서 구현 가능한 방법으로 떠오르고 있다. MPLS는 라벨에 따라 패킷을 포워딩하는 혁신적인 기술로 확장성이 좋다. 특히 MPLS는 터널링 프로토콜로 사용 가능하고 패킷 캡슐화 기능등을 가지고 있어 VPN을 구성하기에 적합하다. MPLS 인터넷 VPN에서 QoS를 보장하기 위해서는 QoS가 지원되도록 디자인된 라우터나 IP 스위치와 트래픽 엔지니어링 알고리즘등을 사용해야만 최적으로 보장된다.

• Smart Media Journal
• /
• v.12 no.7
• /
• pp.68-75
• /
• 2023

In this study, I would like to conduct a study on the design of chat UX between fandom and idol. The 1:多 form of message exposure method between idols and fandom was studied and the optimal exposure form and speed were tested. Based on the results of the experiment, 30 sentences were selected per second among various options, and based on this, the results were applied to the actual Universe platform to facilitate communication between idols and fans.

• Science of Emotion and Sensibility
• /
• v.20 no.1
• /
• pp.3-16
• /
• 2017

With the development and proliferation of three-dimensional(3D) printers, consumers in modern society can now print products of what they want three-dimensionally at home. However, consumers themselves would have to produce digital design maps that are compatible with 3D printers and to set up the optimum printing quality and temperature, as well as to pay for maintenance and repair of 3D printers and to respond to any possible lawsuits related to intellectual property right about designs in order to make possible consumer-tailored manufacturing through 3D printing. However, in reality, since it is very difficult for consumers to respond to these issues, it is necessary to develop services that perform 3D printing on behalf of consumers in the desired direction. Motivated by this objective, this study investigated user experiences on Shapeways(www.shapeways.com), which is a global online 3D printing product and sales companies, from many viewpoints in order to obtain insight into 3D printing services and modes which were preferred by consumers. The study result showed that quantitative evaluations on usability, search process, price adequacy, re-visit intention, diversity of design, and satisfaction of design was scored low overall. Furthermore, this study acquired insight about consumer-tailored 3D printing services through constructive suggestions on multi-language support, openness of manufacturing process, simultaneous operation of online and offline sites, design-oriented consumer-tailored manufacturing service, services that ensure delivery safety and product durability, and surface finishing services. This study is expected to provide a wide range of opinions not only on 3D printing service platform development but also on related industry and research.

• Journal of Service Research and Studies
• /
• v.8 no.4
• /
• pp.13-29
• /
• 2018

The final goal of this study was to develop an optimal service scenario to ensure that building occupants can be effectively evacuated from the building within the golden time without extra assistance in preparing and evacuating for fires. In addition, the research was carried out by dividing the current services into fire evacuation and preparedness phases by applying the Double Diamond process in order to find a way to better familiar them as a lifestyle and to always be prepared for fires. For the building occupants and managers, a total of 14 ideas were first suggested, including not only the services of how to evacuate from a fire, but also the life-style service functions associated with fire implementation technology in daily life. The 14 proposed ideas were conducted by the Service quality evaluation and Analytical Hierarchy Process(AHP) from the perspective of the service recipient, and those were finally prioritized from the service provider's perspective, taking into account the cost and practicality of the service provider. The results of this study show that differences in the importance of fire phases considered by stakeholders and the perception of fire generally vary considerably.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.129-138
• /
• 2006

It is expected that the typical lifestyle of the future will be transformed into an opulent and comfortable existence as the quality of life improves due to the increase in household income and reduction in working hours. In the meantime, as the standard of living becomes increasingly more comfortable and plentiful, the toll on physical health becomes magnified as a result of obesity and insufficient exercise caused by super nutrition and change in labor conditions (from physical labor to mental labor). This has instigated a deep awareness in fitness on the part of many people, forcing them to recognize the significance of daily exercise and physical activity. The high annual growth rate in the fitness and athletic apparatus market, which is more than 20%, is attributed to this phenomenon. The Elliptical Cross Trainer(ECT), which has drawn wide attention recently, is a non-impact athletic apparatus that not only promotes exercise of the upper body parts in such sports as skiing but also the exercise of lower parts of the body on a treadmill. It is a type of cross training athletic gear that has been developed for aerobic exercise throughout the entire body. It has already formed a market as big as that of the treadmill in Europe, America, etc. Recently, its demand is growing sharply in the Korean markets as well as those in Northeast Asian countries, Despite such demand increase and expansion, since most of the expensive ECTs are exclusively supplied by suppliers in only a few advanced countries, localization of the ECT is urgently required in order to enhance competitiveness of Korean manufacturers and to expand the market. This paper introduces the process and results of a design-engineering cooperative study that was peformed for the development of the ECT.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.8
• /
• pp.1-10
• /
• 2012

This paper proposes design space exploration methodology of many-core processors including multimedia specific instructions to support high-performance and low power ultrasound imaging for portable devices. To explore the impact of multimedia instructions, we compare programs using multimedia instructions and baseline programs with a same many-core processor in terms of execution time, energy efficiency, and area efficiency. Experimental results using a $256{\times}256$ ultrasound image indicate that programs using multimedia instructions achieve 3.16 times of execution time, 8.13 times of energy efficiency, and 3.16 times of area efficiency over the baseline programs, respectively. Likewise, programs using multimedia instructions outperform the baseline programs using a $240{\times}320$ image (2.16 times of execution time, 4.04 times of energy efficiency, 2.16 times of area efficiency) as well as using a $240{\times}400$ image (2.25 times of execution time, 4.34 times of energy efficiency, 2.25 times of area efficiency). In addition, we explore optimal PE architecture of many-core processors including multimedia instructions by varying the number of PEs and memory size.

• Journal of Engineering Education Research
• /
• v.11 no.1
• /
• pp.64-75
• /
• 2008

A new product development and product realization process (PRP) is a circulating and feedback process by generating ideas through creative problem solving process. The early stages of PRP correspond to conceptual design and product development, in which a large portion of product life cycle cost can be saved. The optimal design method for this stage is a robust design suggested by Taguchi. Quality must be 'engineered in' since it can not be 'inspected out.' A robust design is an engineering methodology to improve the quality of a product by minimizing the efforts of variations without eliminating the causes. The objective of this study is to propose a scheme and a case study of robust design for exploring design parameters, and introduce a creative problem solving process. Major research subjects include a creative problem solving process, robust design procedure and their implementation. For the experiment of Taguchi method, a toy catapult is adopted. For the creativity development, a short project is assigned to devise a similar tool with the toy catapult. A reference model is suggested to compare and evaluate their ideas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.343-354
• /
• 2012

In this paper, various spiral zeroth-order resonators are proposed for wireless power transmission. Since a zerothorder resonance(ZOR) mode of meta-material transmission lines has the characteristic of an infinite wavelength, its frequency is independent of physical length. Also, to obtain high transmission efficiencies high-Q resonators and strong coupling coefficient between coupled resonators are required. Therefore, the resonators consist of spiral inductor and lumped capacitor to use the ZOR mode and they are optimized via parametric study and circuit analysis for a high-Q resonator design. The optimized resonators are simulated and compared with a conventional spiral resonator and one of them was fabricated and measured. The fabricated one has a dimension of $20cm{\times}20cm{\times}8cm$($0.009{\lambda}_0{\times}0.009_{\lambda}_0{\times}0.004{\lambda}_0$) and the transmission efficiency of 80 % is measured at 13.56 MHz at transmitted distance of 40 cm.