• Nuclear industry
• /
• v.37 no.9
• /
• pp.58-90
• /
• 2017

'공포의 값비싼 대가(The High Cost of Fear)'는 공개된 자료 중 동료 평가를 마친 최신의 자료와 간단한 계산 방법을 통해 한국의 탈원전 정책이 가져올 경제적, 환경적 영향을 분석한 보고서이다. 우리는 탈원전 정책이 다음과 같은 영향을 미칠 것으로 예측한다. ${\cdot}$천연가스 구매에만 최소 매년 100억 달러의 비용이 들 것이다. 이는 한국 평균임금인 연소득 29,125달러를 받는 일자리 343,000개에 해당하는 금액이다. ${\cdot}$비용의 대부분은 연료 수입에 사용될 것이며, 한국의 무역 수지가 악화될 것이다. ${\cdot}$한국의 부족한 재생에너지 자원을 고려할 때, 상당한 양의 화석 연료를 추가로 사용하게 될 것이다. ${\cdot}$LNG 발전소가 석탄 발전소를 대체하지 못하고 원자력발전소를 대체하면서 대기 오염으로 인한 조기 사망자 수가 증가할 것이다. ${\cdot}$한국의 전도유망한 원전 수출 산업이 아예 붕괴되거나 큰 타격을 입을 것이다. ${\cdot}$평균적 미국 자동차의 연간 주행거리를 기준으로 150만대에서 270만대의 미국 자동차가 배출하는 배기가스의 양만큼 연간 탄소 배출이 증가할 것이고, 한국은 파리기후협정에서 약속한 탄소 배출 감축 목표를 달성할 수 없게 된다. 본 보고서는 현재 계획된 탈원전 정책의 역사적 사회적 배경을 분석하여 다음과 같은 결론을 도출하였다. ${\cdot}$'그린피스(Greenpeace)', '지구의 친구들(Friends for the Earth)' 등 막대한 자금 지원을 받는 해외 환경단체들은 탈원전 거짓 정보의 근원이며, 이들은 저렴하고 풍부한 에너지라는 개념을 반대한다. ${\cdot}$후쿠시마 원전 사고와 그 여파의 주된 원인은 일본 원자력산업계의 오만과 원자력에 대한 과장된 집단 공포이다. ${\cdot}$반핵 진영의 논리에는 산업계와 정부에 대한 불신과 원자력, 방사선에 대한 몰이해가 반영되어 있다. ${\cdot}$반핵 진영은 후쿠시마 사고를 2014년 한수원 납품 비리 사태의 심각성을 과장하는 데 사용하고 있다. 2014년의 비리 사태는 한국 원자력 규제기관의 독립성을 증명했으며, 2016년의 경주 지진은 2011년 후쿠시마에서 쓰나미와 노심 용융을 초래한 동일본 대지진의 1/350,000의 크기밖에 되지 않는다. 본 보고서는 한국과 타국가의 반핵 운동이 주는 교훈을 다음과 같이 정리하였다. ${\cdot}$어떠한 국가도 에너지 자원 최빈국인 프랑스나 한국 같은 국가조차도 탈원전 '전쟁'에서 자유롭지 않으며, 이는 전 세계적으로 원자력산업이 쇠퇴하는 원인이다. ${\cdot}$원자력산업계, 정부, IAEA 등은 한국과 세계 여러 국가에서- 문화적, 제도적, 재정적 원인으로 원자력산업의 보호와 확대라는 목표를 달성할 수 없다. ${\cdot}$원자력산업을 구하기 위해서는 새로운 비전과 새로운 제도, 그리고 새로운 리더십이 필요하다. ${\cdot}$원자력의 근원적이고 혁신적인 비전 원자력 인본주의(atomic humanism)에 대한 재조명이 필요하다. ${\cdot}$원자력을 지키고 대중과 소통하기 위해 과학 연구단체, 대학교, 사단법인, NGO 등의 새로운 기관들을 후원해야 한다. ${\cdot}$공포를 조장하는 반원전 세력에 맞서 공포를 극복해야 하고, 대중의 공포를 극복해왔던 다른 기술들의 사례에서 교훈을 얻어야 한다.

• Journal of the Korea Society for Simulation
• /
• v.26 no.2
• /
• pp.41-49
• /
• 2017

In the acquisition program, the conceptual design is the most important step toward specifying the military objectives, establishing requirements and determining future developmental directions, of a target system. However, if both the requirements and directions are incorrectly set due to the lack of development experiences and literature backgrounds in the target systems, such as future ground combat vehicles, it may become a major risk in the future design phases and the entire acquisition program. In order to correct these errors in the future phases, time, effort and cost are required. Therefore, it is necessary to reduce the errors that occur in the initial stages to effectively acquire the future ground combat vehicles. This paper describes the initial design method for verifying the requirements and the developmental directions and estimating the system performance at the conceptual design through the system-level physical modeling and simulation (M&S) and the target system performance analysis. The system-level physical M&S use cutting-edge design tools, model-based designs and geometric-based designs. The system performance estimation is driven from the results of the system-level physical M&S and the specialized system analysis software.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.163-180
• /
• 2020

In this study, to build a spatial information infrastructure, which is a component of a smart city, a 3D digital twin model in the downtown area was built based on the latest spatial information acquisition technology, the drone. Several analysis models were implemented by utilizing. While the data processing time and quality of the three types of drone photogrammetry software are different, the accuracy of the construction model is ± 0.04 in the N direction and ± 0.03m in the E direction. In the m and Z directions, ± 0.02m was found to be less than 0.1m, which is defined as the allowable range of surveying performance and inspection performance for the boundary point in the area where the registration of the boundary point registration is executed. 1: 500 to 1 of the aerial survey work regulation: The standard deviation, which is the error limit of the photographic reference point of the 600 scale, appeared within 0.14 cm, and it was found that the error limit of the large scale specified in the cadastral and aerial survey was satisfied. In addition, in order to increase the usability of smart city realization using a drone-based 3D urban digital twin model, the model built in this study was used to implement Prospect right analysis, landscape analysis, Right of light analysis, patrol route analysis, and fire suppression simulation training. Compared to the existing aerial photographic survey method, it was judged that the accuracy of the naked eye reading point is more accurate (about 10cm) than the existing aerial photographic survey, and it is possible to reduce the construction cost compared to the existing aerial photographic survey at a construction area of about 30㎢ or less.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.649-658
• /
• 2009

The recent emergence of the paradigm of new urban planning for building intelligent urban spaces, such as U-City and U-Eco City, of which the concept of ubiquitous technology is applied, requires high quality three-dimensional spatial information of the urban area. The aim of this study is to build a multi-dimensional spatio-visual information system that includes the solution for visualization, spatial information search, analysis, and evaluation by integrating various types of 3D-modeled spatial information concerning the large urban-size area based on the latest GIS application technology. The range of this study is the integration, visualization, and utilization of spatial information with the goal of building 3D virtual urban environment of high-quality and high-resolution by increasing the utilization of the systematic urban facilities in order to fully reflect the actual user's needs, using the aerial LiDAR data as the plan to overcome the limitations of the existing 3D urban modeling. By reproducing the virtual urban environment the most similar to the actual world through the mash-up of satellite images and aerial photos on the standard format of spatial information constituted of properties and signs, the system will be built with many analysis and utilization functions that support the view and sunlight analysis, various administrative tasks, as well as the decision making process of the city.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.28 no.4
• /
• pp.57-76
• /
• 2017

The purpose of this study is to investigate the determinants of the quality of Web-based legal information services and their significant influences on the user continuance intentions. Based on the main dimensions of the SERVQUAL, this study conceptualizes five dimensions of reliability, assurance, design, empathy, and responsiveness. It measures the level of expectation and satisfaction on the basis of these five dimensions. Regression analysis was conducted to extract and analyze the determinants of the service quality and the factors affecting continuous intention. The level of legal information service quality is superior in empathy, responsiveness, and design category, but it is relatively insufficient in reliability and assurance category. In the reliability category, the relevance of the search results was an issue. The problems related to the authority and information sources were recognized as important. Reliability implies that there is a relatively close relationship between empathy and responsiveness, and that it is necessary to improve the quality of contents such as empathy and responsiveness in order to increase reliability. In order to increase the ongoing use of legal information services in the future, it is more effective to make sure that assurance is top priority.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.2
• /
• pp.53-60
• /
• 2016

In this paper, we introduce the implementation and test results of a new method of correlated result storage to achieve the full performance of the Daejeon hardware correlator. Recently, the observation of 8 Gbps speed, which is the maximum observational standard of KVN(Korean VLBI Network), has been performed. The correlation processing using the Daejeon hardware correlator is also required. Therefore, a new correlation result storage introduction has become necessary. The maximum correlation result output speed of the Daejeon hardware correlator is 1.4 GB/sec per 25.6 ms integration time. The conventional correlation result storage system can not cope with the maximum correlation output speed of the Daejeon hardware correlator, and the output speed is limited to 1/4. That is, among the four input ports of the Daejeon hardware correlator, the three inputs are limited to correspond to the observation rate of 1 Gbps. This new storage system uses the Gluster file system among many of the latest technologies used in storage systems. In tests that meet the maximum output rate of 1.4 GB/sec for the Daejeon hardware correlator, 350 MB/sec for each of the four optical outputs, resulting in 1.4 GB/sec in total.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.923-932
• /
• 2007

This research examines current viewpoints on modesty and immodesty in dress from a cross-cultural perspective. The purposes of this study was to explore the concept of modesty and to find out sub-variables of modesty, and the similarities and differences of modesty between two cultures. This qualitative interview study of 58 female college students in America and 36 in Korea examines attitudes about modesty. The data collection was performed in America and Korea simultaneously in Feb. 2004. According to the results of this study, the concept of modesty had 4 sub-variables such as covering up, appropriateness, drawing attention from others, and conservativeness. Both American and Korean students mentioned that time and place are closely related with modesty and that modesty was related with gender. Also cultural differences were existed.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.451-456
• /
• 2015

This research examines the use of Cross Bearing in the Republic of Korea Navy. Specifically, this study focuses on the degrees of errors caused by the order of measuring targets and suggests a new method to determine Advice Course. It then reviews the appropriateness of the contents of Location Report that is regularly to the duty officer during a voyage in a narrow channel. Whenever a naval vessel passes through a narrow channel, many number of sailors are assigned to diverse positions in order to enhance navigational safety. Even though it is possible to easily recognize the location of a ship with helps of various kinds of navigational equipments using state-of-the-art technology, there are still several situations where sailors' efforts are indispensible for calculating the position of their ship : when the ship is damaged during an engagement with enemies and when the enemies interfere (GPS) signals. In addition, the particularity of naval vessels in which many number of crew members can be assigned to various positions supports for the suitability of the use of Cross Bearing in the Navy. This study will contribute to navigational safety of the ROK Navy and fostering junior naval officers' seamanship.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.64-72
• /
• 2013

The purpose of this study is to confirm the possibility of obtaining high grade coal from 57.39% of fixed carbon fine coal. Also, the mineralogical, physical/chemical and liberation characteristics are to be identified to decrease in ash amount, during the pre-processing of clean coal technology. In this study, batch flotation and CPT column flotation proper for the processing of fine particles were used with the variation in kinds and quantity of frother, collector and depressant. Also air flow rate and feeding rates were examined. As a result of batch flotation using 20% of pulp density DMU 101 collector(100 mL/ton), AF65 frother(300 mL/ton), sodium metaphosphate depressant (1 kg/ton), 67.57% of ash rejection and 70.90% of combustible recovery were obtained. The result of CPT column flotation was 85.59% of ash rejection and 88.97% of combustible recovery under the conditions of 5% of pulp density, DMU-101 collector (100 mL/ton), AF65 frother(10 L/ton), SMP depressant(1 kg/ton), wash water(100 mL/min.) and air flow rate(1,200 mL/min.).

• Journal of Life Science
• /
• v.26 no.7
• /
• pp.855-867
• /
• 2016

The horse is relatively earlier domesticated animal species. Domesticated horses have been selected for their ability of racing, robustness, and disease-resistance. As a result, the thoroughbred horse genome has been condensed many genotypes related to exercise ability. In recent years, with the advent of NGS technologies, many studies were concentrated on finding superior genetic species in the horse genome in terms of genomics. Consequently, GWAS (Genome-wide Association study) is applied to horse genome, then genetic marker is revealed for superior racing ability. In addition, RNA-Seq is utilized as a method for analyze of whole transcript profiling in specific samples. By using this approach, specific gene expression patterns and transcript sequences can be revealed in various samples such as each individual, before and after exercise state, and each tissue. DNA methylation, a strong factor that regulate gene expression without the change of DNA sequence, have got a lot of attention. In horse genome, exercise- or individual-specific DNA methylation patterns were detected, and could be useful to develop selective marker of superior horses. MicroRNAs inhibit gene expression, and transposable elements accounted for half of the mammalian genome. These two elements are the crucial factors in functional genomics, and could be applied to the selection of superior horses. As the functional genomics and epigenomics advance, then these technologies introduced in this paper were applied to select superior horses. In this paper, the studies for selection of superior horses through genetic technologies, and development possibilities of these studies were discussed.