• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.2
• /
• pp.159-163
• /
• 2006

In order to tune the speed controller in the linear servo applications an accurate information of a mover mass including a load mass is always required. This paper suggests the mass estimation method of a permanent magnet linear synchronous motor(PMLSM) 4y using the parameter estimation method of Least-Squares algorithm. First, the deterministic autoregressive moving average(DARMA) model of the mechanical dynamic system is derived. Then the application of the Least-Squares algorithm shows that the mass can be accurately estimated both in the simulation results and in the experimental results.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.507-511
• /
• 2011

본 논문에서는 위치기반서비스의 핵심기능을 담당하는 측위기술 중 흔히 사용되고 있는 삼각측량법과 최소자승법을 보정한 방법을 이용하여 객체의 위치를 결정하는 알고리즘의 산포를 감소시키는 방안을 연구하였다. 두 측위 방법에서 사용되는 거리값은 모두 동일한 보정과 필터링 과정을 적용하였으며, 프로그램 구현 후 실내에서 테스트를 실시하였다. 프로그램은 LabView 2010으로 구현하였고, 각각의 알고리즘을 모듈화하여 필터링 적용 전후 및 개선효과를 비교하기 쉽도록 구성하였다. 일반적인 환경에서 실험한 결과 삼각측량이 최소자승법보다 더 좋은 정확도를 보여주었고, 필터링 과정을 거칠수록 정확도가 향상되는 것을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.1
• /
• pp.9-16
• /
• 2014

The localization compensation algorithm for moving objects using the least-squares method is suggested and the performance of the algorithm is analyzed in this paper. The suggested compensation algorithm measures the distance values of the mobile object moving as a constant speed by the TMVS (TWR Minimum Value Selection) method, estimates the location of the mobile node by the trilateration scheme based on the values, and the estimated location is compensated using the least-squares method. By experiments, it is confirmed that the localization performance of the suggested compensation algorithm is largely improved to 58.84% and 40.28% compared with the conventional trilateration method in the scenario 1 and 2, respectively.

• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.245-250
• /
• 1998

A new computational algorithm is presented for the peak point detection of white light interferograms. Assuming the visibility function of white light interferograms as a quadratic polynomial, the peak point is searched so as to minimize the error sum between the measured intensity data and the analytical intensity. As compared with other existing algorithms, this new algorithm requires less computation since the peak point is simply determined with a single step matrix multiplication. In addition, a good robustness is obtained against external random disturbances on measured intensities since the algorithm is based upon least squares principles.

• Korean Journal of Remote Sensing
• /
• v.13 no.2
• /
• pp.121-132
• /
• 1997

This paper describes the development of a stereo matching algorithm for extracting Digital Elevation Model(DEM) from satellite images. This matching algorithm is based on a non-linear least squares correlation estimation but has improved matching speed. The algorithm consists of three steps: matching execution, matching control and matching optimization. Each is described. The performance of the presented algorithm is quantitatively analyzed with experiments on matching probability, matching speed and matching convergence radius.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.3
• /
• pp.49-56
• /
• 2012

Performance analysis on RAIM, which is one of the techniques for monitoring integrity to ensure the reliability of GPS, was conducted in this study. RAIM is such a method which allows its user to monitor integrity in the stand-alone mode. Among the existing RAIM procedures, the representative methods including the RCM (Range Comparison Method), LSRM (Least Square Residual Method), Parity approach and WRAIM (Weighted RAIM) were evaluated, and their performance was analyzed. To validate the performance of the implemented algorithms, fault detection was tried on the clock malfunctioning event of PRN 23 occurred on January 1st, 2004. As a result, it was identified that the LSRM and the WRAIM detected all the faults happened in the event. In the case of RCM, all the states of fault were detected except for the error which occurred as a false alarm at one epoch. Furthermore, simulated biases were added for each satellite to analyze the sensitivity of each algorithm. Consequently, when biases of the 9-13 meters range were simulated for the RCM and LSRM algorithm, all the malfunctions were detected. For the WRAIM method, it could detect range biases greater than 15 meters.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.100-101
• /
• 2019

본 논문은 유도전동기 고정자 자속 기준 벡터제어에서, 슬립 관계식과 순환 최소자승법을 이용하여 회전자 저항 및 고정자 과도 인덕턴스를 동시에 추정하는 알고리즘을 제안한다. 모의실험을 수행하여, 추정 회전자 저항과 고정자 과도 인덕턴스가 제안된 방법에 의해 각각 실제 값에 수렴함을 보인다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2235_2236
• /
• 2009

본 논문에서는 초음파 센서를 이용하여 3차원 마우스 시스템을 설계하였다. 마우스에 부착시킨 초음파 발신부와 모니터에 부착시킨 초음파 수신부를 이용하여 마우스와 모니터에 부착된 수신부사이의 거리를 측정한다. 측정한 거리는 무선네트워크를 이용하여 Host PC에 전송하고, Host PC는 측정거리와 위치 추정 알고리즘을 이용하여 마우스의 위치를 추정한다. 최소자승법을 이용하여 위치 추정 알고리즘의 모의실험을 수행하였으며, 모의실험 결과로부터 최소자승법을 3차원 마우스 시스템의 위치추정 알고리즘으로 활용할 수 있음을 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.4
• /
• pp.272-279
• /
• 2016

In this paper, the realization of a hearing aid adaptively cancelling feedback noise was considered. Conventional least mean square method in time domain was transformed into frequency domain in order to minimize computational burden. The adaptive filter algorithm was evaluated by Matlab (Matrix laboratory), and it was confirmed by CSR 8675 Bluetooth DSP IC (Digital Signal Processor Integrated Circuit) chip firmware realization. Some remote control features by a smart phone was added to the smart hearing aid for user interface easiness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2303-2309
• /
• 1997

This paper presents a convergence analysis of the stocastic gradient adaptive algorithm based on the least mean absolute third (LMAT) error criteriohn. Under the assumption that the signals involved are zero-mean, wide-sense sateionaryand gaussian, a set of nonlinear difference equations that characterizes the mean and mean-squared behavior of the algorithm is derived. Computer simulation resutls show fairly good agreements between the theoetical and empirical behaviors of the algorithm.