• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.1
• /
• pp.39-48
• /
• 2013

This paper develops a 2-D moving least squares(MLS) difference method for Stefan problem by extending the 1-D version of the conventional method. Unlike to 1-D interfacial modeling, the complex topology change in 2-D domain due to arbitrarily moving boundary is successfully modelled. The MLS derivative approximation that drives the kinetics of moving boundary is derived while the strong merit of MLS Difference Method that utilizes only nodal computation is effectively conserved. The governing equations are differentiated by an implicit scheme for achieving numerical stability and the moving boundary is updated by an explicit scheme for maximizing numerical efficiency. Numerical experiments prove that the MLS Difference Method shows very good accuracy and efficiency in solving complex 2-D Stefan problems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.219-226
• /
• 2007

In this paper, we report phase noise effects on SER(Symbol Error Rate) of MQAM(M-ary Quadrature Amplitude Modulation), DPSK(Differential Phase Shift Keying), OFDM(Orthogonal frequency Division Multiplex)-MQAM and OFDM-DPSK. SER of each modulation method has been quantified at the various offset frequencies of the local oscillator and compared with phase noise effects with the ideal cases, which have no phase noise, through the MATLAB simulation. And the ratio of modulation bandwidths to the SERs at the various frequency offsets for the above modulation methods have been analyzed for the system requirement of minimum phase noise characteristics.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.6
• /
• pp.440-447
• /
• 2013

In this paper, a higher harmonic control (HHC) methodology is applied to find the optimum input scenario for the vibratory hub loads reduction. A comprehensive aeroelastic analysis code, CAMRAD II, is used to model the HART (Higher-harmonic-control Aeroacoustic Rotor Test) II rotor, and parametric study is conducted for the best HHC inputs leading to a minimum vibration (MV) condition. The resulting outcomes are compared with the earlier HART II test results. It is indicated that the control input adopted in the MV condition showed less satisfactory results. The new MV condition obtained in the present investigation can achieve 45% lower vibration level than the baseline uncontrolled condition. The optimum HHC input results lead to 3/rev harmonic input having $0.8^{\circ}$ amplitude and $350^{\circ}$ phase angle. About 5% reduction in the required power is possible but accompanies with the increase of vibration level.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.149-155
• /
• 2006

A technique used to induce maximum oscillating voltage in the BJT Clapp VCO is presented. The technique finds the optimal feedback capacitance values resulting in the largest oscillating signal swing across the resonator at a given bias state and the VCO's center frequency. By doing so, the presented technique attains the lowest phase noise which the BJT Clapp VCO can have. An analysis of the measurement results of the fabricated oscillators has verified that the VCO with the optimal feedback capacitance values actually exhibits the lowest phase noise.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.591-598
• /
• 2021

The digital phase-locked loops(DPLL) is a circuit used for phase synchronization and has been generally used in various fields such as communication and circuit fields. State estimators are used to design digital phase-locked loops, and infinite impulse response state estimators such as the well-known Kalman filter have been used. In general, the performance of the infinite impulse response state estimator-based digital phase-locked loop is excellent, but a sudden performance degradation may occur in unexpected situations such as inaccuracy of initial value, model error, and disturbance. In this paper, we propose a minimum variance finite impulse response filter with optimal horizon for designing a new digital phase-locked loop. A numerical method is introduced to obtain the measured value interval length, which is an important parameter of the proposed finite impulse response filter, and to obtain a gain, the covariance matrix of the error is set as a cost function, and a linear matrix inequality is used to minimize it. In order to verify the superiority and robustness of the proposed digital phase-locked loop, a simulation was performed for comparison and analysis with the existing method in a situation where noise information was inaccurate.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.345-347
• /
• 2003

본 논문에서는 디지털 보호 계전기에 쓰이는 필터 중에서 최소 자승 알고리즘을 이용한 고성능 FIR 필터를 설계하였다. 기존의 DFT필터와 MATLAB 시뮬레이션을 이용하여 비교하였으며 FIR 필터의 VHDL모델 및 합성에 중점을 두었다. FIR 필터는 기본적으로 유한개의 임펄스 응답이 이루어지기 때문에 기타 다른 필터에 비하여 안정도가 높으며 선형적인 위상을 가지기 때문에 차단 주파수 대역의 왜곡현상을 없앨 수 있는 장점을 가지고 있다. 여러 가지 알고리즘으로 구현한 FIR 필터를 시뮬레이션 한 결과 최소 자승 알고리즘이 가장 우수한 결과를 나타내었다. 기본적으로 디지털 보호 계전기에서 디지털 필터의 기능은 사고 전압, 전류로부터 60Hz의 기본파 추출 CT, PT 왜곡 및 DC offset을 제거하는데 있다. 본 논문에서는 이러한 기능을 가지면서 샘플링 주파수와 차수를 같게 하여 FIR 필터와 DFT 필터의 주파수 응답과 연 산 속도를 비교 하였다. 본 논문에서 설계된 최소 자승 알고리즘을 이용한 FIR 필터는 같은 조건의 DFT필터에 비해 1고조파와 2고조파의 차이가 10db 이상 더 우수 하였으며 연산 속도 또한 2배 이상 좋은 결과를 보였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.1
• /
• pp.11-16
• /
• 2020

The rotational stability of an interlocking caisson breakwater was studied. Using the analytical solution for the linear wave incident to the infinite breakwater, the phase difference effect of wave pressures in the direction of the breakwater baseline is considered, and Goda's wave pressure formula in the design code is adopted to consider the nonlinearity of the design wave. The rotational safety factor of the breakwater was defined as the ratio of the rotational frictional resistance moment due to caisson's own weight and the acting rotational moment due to the horizontal and vertical wave forces. An analytical solution for the rotational center point location and the minimum safety factor is presented. Stability assessment formula were proposed to be applicable to all design wave conditions used in current port and harbor structure design such as regular waves, irregular waves and multi-directional irregular waves.

• Communications of the Korean Mathematical Society
• /
• v.16 no.1
• /
• pp.1-24
• /
• 2001

어떤 유향그래프 D의 경쟁그래프란 D와 같은 꼭지점들의 집합을 갖고 두 개의 꼭지점 x와 y가 변으로 연결되어있는 것과 동치인 조건이 D에서 어떤 꼭지점 z에 대하여 유향변(x,z)와 (y,z)가 존재하는 것인 그래프로 정의된다. 어떤 그래프 G의 경쟁수란 G에 첨가하여 생기는 그래프가 유향 회로가 없는 유향그래프의 경쟁그래프가 되도록 하는 고립된 꼭지점의 최소수로 정의된다. 갱쟁그래프의 개념은 생태학적 위상공간의 최소차원을 결정하는 수단으로 1968에 Cohen에 의하여 도입되었다. 경쟁그래프와 그것의 변형들은 잡음이 많은 통신로 상에서의 교신, 라디오 송신기에 주파수 부어하기, 복잡한 경제 체계와 에너지 체계에 응용된다. 이 논문에서는 경쟁 그래프와 그 변형들, 경쟁수와 그 변형들에 대하여 소개하며 그것들에 대한 중요한 결과들을 개관하고 미해결 문제들을 제시하고자 한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.22-28
• /
• 2008

It proposes the novel design conditions to maximize the power coupling of active directional couplers with mismatched access guides. To verify the validity and accuracy of the conditions proposed, a new coupling efficiency is defined and it depends on the reflection coefficients occurred at the discontinuous input/output interfaces. The numerical results reveal that the phase-matched condition and the minimum-gap condition for those couplers are no longer suitable to optimize the design parameters and a new criterion is needed.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.120-126
• /
• 2006

A grating-assisted fiber coupler(GAFC), which consists of a thin-film waveguide with grating and circular optical fiber, is proposed and the optimized power coupling is evaluated by using a technique amenable to rigorous longitudinal modal transmission-line theory(L-MTLT). In addition, novel criteria to couple an optical signal incident through the grating waveguide to a single-mode optical fiber are proposed. The numerical result reveals that the optimized power coupling occurs at minimum-gap condition between rigorous modes rather than for the conventional phase-matching condition.