• Korean Journal of Optics and Photonics
• /
• v.27 no.2
• /
• pp.61-66
• /
• 2016

We used transmission deflectometry to measure the three-dimensional shapes of optical components, and we used the Hilbert transform to retrieve the phases from measured deformed fringe images. Deflectometry is useful for measuring large-scale samples, and specular samples. We have retrieved the phases from deformed fringe images and Hilbert-transformed images, and have used the least-squares method to find the height information. We have verified that phase retrieval using Hilbert transform is useful by computer simulation and experiment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.5
• /
• pp.61-67
• /
• 2001

Magnetic flux saturation dependent on phase of initial input power to high voltage transformer used in Micro wave oven. To limit inrush current high voltage transformer the relay contact should be ˝ON˝ when the lowest point of input voltage phase. The improved circuit is form compensating interrupt signal Micom input so the relay contact can be ˝ON˝ when the inrush current is lower. Test results are presented that improved circuit satisfies the limit 50[A] of requirement for input voltage variation mode. And the result verified by statistical method.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.267-276
• /
• 1997

We set up a four-wave holographic interferometer using a symmetric dual-beam illumination which is to measure in-plane and out-of-plane displacement simultaneously. In order to acquire the displacement phase map we applied the phase-shifting method and removed the noise of the phase map with least-squares fitting. In this approach the access to information relative to both the difference and sum of phases existing in the two arms of four-wave holographic interferometer was allowed. As a result, in-plane and out-of-plane displacement was measured to the accuracy of λ/40 and λ/100, respectively at λ=632.8nm

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.149-154
• /
• 2001

This study discusses a non-contact optical technique, electronic speckle pattern interferometry(ESPI), that is well suited for a deformation measurement of structure. Phase shifting method and unwrapping method have used to make deformation quantitative widely. In this paper, a previous numerical formula for phase shifting method is reconstructed in addition to least square fitting method to improve sensitivity and phase unwrapping based on vertical-horizontal scanning method is applied to analyze in-plane and out-of-plane deformation quantitatively.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.354-359
• /
• 2007

A new level set based topology optimization employing inner-front creation algorithm is presented. In the conventional level set based topology optimization, the optimum topology strongly depends on the initial level set distribution due to the incapability of inner-front creation during optimization process. In the present work, an inner-front creation algorithm is proposed, in which the sizes, positions, and number of new inner-fronts during the optimization process can be globally and consistently identified. To update the level set function during the optimization process, the least-squares finite element method is employed. As demonstrative examples for the flexibility and usefulness of the proposed method, the level set based topology optimization considering lightweight design of 3D shell structure is carried out.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.105-114
• /
• 1997

The phase retrieval problem is concerned with the reconstruction of a signal or its fourier transform phase form the fourier transform magnitude of the signal. This problem does not have a unique solution, in general. If, however, the desired signal is minimum-phase, then it can be decided uniquely. This paper shows that we can make a minimum-phase signal by adding a delta function having a large value at the origin of an arbitrary one-dimensional signal, and a two-dimensional signal can be uniquely specified from its fourier transform magnitude if it is added by a delta function having a large value at the origin, and finally we can solve a two-dimensional phase retrieval problem by decomposing it into several ine-dimensional phase retrieval problems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12B
• /
• pp.2052-2059
• /
• 2000

Digital IF(Intermediate Frequency) 처리단과 같은 고속과 저전력을 요구하는 필터에서 덧셈기만을 사용하여 CSD(Canonical Signed Digit)형의 필터계수들을 구현하는 구조가 널리 연구되고 있다. 본 논문에서는 선형위상 FIR(Finite Impulse Response) 필터의 CSD형 필터계수들을 최소의 덧셈으로 구현할 수 있는 아키텍처를 제안한다. 1과 -1로 이루어진 필터계수 표에서 공통패턴을 공유함으로서 덧셈의 수를 줄이는 방법이 이미 연구되었다. 본 논문은 비트 shift, 비트 add, 비트 반전을 통하여 인공의 공통패턴을 만들어서 이미 존재하는 공통패턴에 합류시킴으로서 덧셈의 수를 더욱 줄일 수 있는 방법을 제안한다. CDMA 이동통신 단말기의 IF단에 사용되는 사양의 디지털 필터를 73탭의 CSD형 계수로 구현하여 9.2%의 덧셈 감소의 효과가 있음을 보였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.235-238
• /
• 2001

Deformation phase can be obtained by using Least-Square Fitting. In extraction of phase values, Least-Square Fitting is superior to usual method like as 2, 3, 4-Bucket Algorithm. That can extract almost noise-free phase and retain 2$\pi$discontinuities. But more fringe in phase map, 2$\pi$ discontinuities is destroyed when that is filtered and reconstruction of deformation is not reliable. So, we adapted Least-Square Fitting using an isotropic window in dense fringe. using Sine-Cosine filter give us perfect 2$\pi$discontinuities information. We showed the process and result of extraction of phase map and filtering in this paper.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.20-26
• /
• 2002

Deformation phase can be obtained by using Least-Square fitting. In extraction of phase values, Least-Square Fitting is superior to usual method such as 2, 3, 4-Bucket Algorithm. That can extract almost noise-free phase and retain 2 $\pi$ discontinuities. But more fringes in phase map, 2 $\pi$ discontinuities are destroyed when that are filtered and reconstruction of deformation is not reliable. So, we adapted Least-Square fitting using an isotropic window in dense fringe. Using Sine/cosine filter give us perfect 2 $\pi$ discontinuities information. We showed the process and result of extraction of phase map and filtering in this paper.

• Korean Journal of Optics and Photonics
• /
• v.8 no.5
• /
• pp.362-365
• /
• 1997

This paper presents a new optical phase stabilization technique for interferometric such as Mach-Zehnder interferometers or Homodyne detectors. The proposed technique can lock such interferometric systems in their maximum/minimum optical outputs without using a dither signal. The phase control scheme is a modified steepest decent algorithm, and is analyzed in terms of a delta modulation approach. It is also applicable to low-repetition rate pulsed interferometric systems in which conventionally used dithering method is difficult to be applied.