• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.327-333
• /
• 2014

The Convention on the international regulations for preventing collisions at sea, 1972(COLREGs) defines the collision avoidance principles and various navigation rules for the prevention of collision at sea. In particular, the initial responses to avoid risk of collision are mainly decided by navigation officer's experience and subjective judgement. However, collision accidents could be effectively prevented if the minimum criteria of quantitative initial response are suggested to the junior officers and the cadets who have insufficient sea experience and navigation competency. This study reviewed the COLREGs terms related to the initial response and the existing papers concerned with risk assessment model. A questionnaire survey is also carried out for safe passing distance, degrees of alternating course and initial response distance to avoid collision in accordance with various encounter situations. Base on these results, we propose the proper minimum safe passing distance between the vessels, the initial response distance and required turning angles for alternation in each encounter situations. The suggested criteria of initial response will contribute to the prevention of collision at sea as well as the improvement of gradual navigation technology.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.2
• /
• pp.81-88
• /
• 2015

This study assessed the behavior of rock pillar in tunnel diverging area by using a three dimensional numerical analysis. Based on parameters affecting the behavior of rock pillar, this study evaluated different safety factors according to pillar width, depth and rock conditions. It turned out that as the rock pillar width increases, the change curve of safety factors in accordance with depth and rock conditions shows more of the nonlinear behavior. By the assessment of the minimum safety factor, a safety factor chart on the behavior of rock pillar in tunnel diverging area was suggested.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.2
• /
• pp.1-9
• /
• 1986

The marathon course on road surfaces varies frequently in alignment horizontally and /or vertically. This fact compelled use to use a calibrated bicycle method for the course measurement, and to be required statistical approaches for data processing. This paper deals with the computation of the Seoul Olympic Marathon course lengths measured on May 18, 1986. The concept of safety factor against short course is analyzed for certification, and statistical methods are presented to compute an appropriate safety factor. The results of computation show that the best (lowest) actual measurement provides about 99.95% confidence that the combined lengths of all intervals will not be found short upon an equally accurate remeasurement.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.475-478
• /
• 2009

안개가 교통사고를 유발시키는 원인을 살펴보면 운전자의 시거와 밀접한 관련이 있다. 짙은 안개가 발생하게 되면 돌발상황이 발생하였을 때 도로를 주행하던 차량이 안전하게 정지하기 위해서 필요한 최소 정지거리가 증가하게 되나 안개로 인한 시정이 나빠지게 되어서 사고발생확률이 높은 것이다. 또한 안전한 시거가 확보되지 않기 때문에 단독사고 발생 후 뒤따르던 차량이 전방을 확인하지 못한 상황에서 연쇄 충돌하게 되어 사고가 대형화된다. 이에 본 연구에서는 IT기술인 RFID와 USN을 이용하여 안개로 인한 시정거리에 따라 도로에 있는 과속카메라가 도로주행 한계속도를 자기 스스로 판단하여 자동조절하게 만들고 변경된 한계속도를 그 도로를 이용하는 차량운전자 휴대폰에 문자로 전송해주고 도로전광판에서도 정확하게 주행속도정보를 볼 수 있게 한다. 그리하여 도로주행 한계속도를 어기는 차량에는 범칙금을 부과하게 만든다. 본 연구를 통해 안개에 대한 교통사고의 위험을 줄이고 사회적 경제적으로 이익이 되도록 하기위해 기상상태 변화에 따른 USN 기반의 도로주행 한계속도 지능적 조정 관리시스템을 제안하고자 한다.

• Korean Journal of Remote Sensing
• /
• v.34 no.3
• /
• pp.535-543
• /
• 2018

Recently, level meters have been associated with the safety and maintenance of industrial sites and require a wide measurement range. Generally, to ensure the measurement range of the level meter, the measurement environment is improved to reduce the noise or to compensate the distortion of the signal through signal processing. The noise of FMCW (Frequency Modulated Continuous Wave) radar level meter or the distortion of the signal affects the near region characteristics of the level gauge, resulting in a reduction of the minimum detection distance. In this paper, an equalizer filter considering characteristics of window function and bit spectrum is applied to remove the noise in the near region of the level meter to improve the minimum detection distance performance and to improve the measurement reliability in the vicinity of the level meter, which is relatively difficult to detect, we want to improve the detection range.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.363-365
• /
• 2015

우리나라 연안에서 육지와 섬 사이를 연결하는 해상교량은 계속해서 건설하고 있는 추세이며 해상교량이 선박의 안전한 운항에 새로운 위험요소로 대두되고 있다. 반면에 내항여객선 선장 및 항해사는 무중 레이더만 믿고 항해하여야 하나, 레이더가 해상교량의 주경간 항로와 해상교량 건너편 상황을 탐지하기 어렵다는 레이더의 한계를 인식하지 못하고, 경험과 관행에 의해 무리하게 선박을 운항하고 있다고 판단된다. 이 글은 목포지방해양안전심판원의 관할해역에서 발생한 여객선 비금농협카페리호가 신안1교의 교각과 접촉한 사건의 개요와 원인을 살펴보고, 레이더에 의해 해상교량의 주경간 항로를 식별할 수 있는 대책마련의 필요성, 선박의 해상교량 통항을 위한 최소 가시거리 인식 필요성, 해상교량 주변에 피항지 지정 및 관리, 내항여객선의 VHF청취능력 개선, VTS센터와 한국해운조합 운항관리실의 업무협력 강화, 연안 여객선의 안전문화 정착 필요성, GPS Plotter 과신 주의 등의 교훈 및 개선사항을 제시하고 있다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.183-196
• /
• 2022

Public transportation accessibility has been evaluated through minimum level of service for public transportation. However it is evaluated based operators rather than users. This study analyzed the users' accessibility(first-mile, last-mile) to public transportation using altteul transport card data. As a result of user's accessibility of public transportation, rural areas was lower than that in the urban areas. This study calssified type 1 and 2 based average approach time, and average approach time of Type 1 and 2 were more than average approach time of total area. We propsed an efficient introduction of autonomous public transportation on-demand service using delphi survey. As a result of delphi survey, experts agreed on 9 items regarding function, service item, route operation, approach distance, route mileage, punctuality.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.141-146
• /
• 2019

Economic analysis predicts that the drone market will grow, and the growth of the toy and hobby drone market is expected to gradually expand. Drone expectations are rising due to the net economic function of drone market growth, but accidents due to improper management and operations are also increasing. The difference in toy drone performance is incomparably small compared to industrial drone performance, but the ordinary buyer can not know whether the difference can cause an accident during use. The toy drones used in this study were obtained from KC and CE certification, and 20 kinds of drones were used. The flight time ranged from a minimum of 3 minutes to a maximum of 12 minutes, and the control distance ranged from a minimum of 20m to a maximum of 380m. Therefore, it is necessary to secure product safety through sampling inspection of the radio wave output of toy drones, and it is also necessary to mount an algorithm that automatically lowers the altitude or hover when exceeding the limit flight distance. For future research, we will build data to establish toy drone safety standards through a altitude testing and impact testing of toy drone.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.61-69
• /
• 2008

To examine the compression properties of structural members, the compression and bearing tests were conducted in parallel- and perpendicular-to-grain loading using domestic Japanese larch (Larix kaempferi (Lamb.) Carriere). Compression (bearing) properties with the length of a specimen and the contact length of the bearing plate were investigated, and deformations at each specimen length from the point of bearing force were measured to evaluate the effective end distance tabulated in the present practice (Korean Building Code). Compression (bearing) properties varied with the size of the bearing plate, and the end distance for dowel-type fastener taken into consideration of the specimen's deformation, for the safe design, should be applied with over 7 D.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.65-72
• /
• 2011

When an expressway intersects another expressway, a unique connector needs to be designed between the two consecutive exit ramps. In such a case, it is important to design a connector such that there is enough distance for drivers to find their way safely. A current design manual in Korea prescribes the minimum length of the connector as 240 m. In this research, we have suggested a method for calculating the minimum length of a connector in order to check the feasibility of the currently prescribed length. For this purpose, we have attempted to determine the total perception-reaction time and lane-changing time required by a driver. For determining the driver's perception-reaction time, we have used the driver's decision time in addition to the conventional 2.5 s of perception-reaction time for stopping sight distances. We have considered both the design speed and the average travel speed for the calculation of the length. To evaluate the accuracy of the new method, we have chosen four sites on expressways for which relatively high accident rates were recorded. As a result, we could verify that the current limit (240 m) was sufficient for drivers to be able to change lanes in the given specific geometry. However, the prescribed limit should be revised in case the drivers' decision time is considered to be their perception-reaction time. All new approaches for calculating the ideal length of a connector have been carried out by taking into account the design speed as well as the average travel speed. Owing to the characteristics of the specific geometry for two consecutive exit ramps and the large difference between the design speed and the average travel speed in the objective areas, it is more realistic to use the proposed method by keeping the decision time equal to a driver's perception-reaction time, in order to determine the ideal distance that should be maintained between two consecutive exit ramps.