• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1495-1502
• /
• 1991

본 연구에서는 동일 작업 공간내에서 두대의 로봇이 각각의 토크의 제한 조건 과 충돌 회피 조건을 만족하면서 근사 최소 시간에 지정된 경로를 주행하기 위한 궤적 계획법을 제안하고자 한다. 이때, 동작 우선도에 의하여 한 대의 로봇은 주 로봇, 다른 한 대의 로봇은 종 로봇으로 지정되는데 주 로봇은 입력 토크의 제한조건을 만족 하며 주어진 경로를 최소 시간에 움직이도록 궤적 계획을 하였으며, 종 로봇은 주 로 봇과의 충돌을 피하고 입력 토크의 제한 조건을 만족하며 주어진 경로를 근사 최소 시 간에 움직이도록 하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.6
• /
• pp.122-127
• /
• 1996

The achievement of the optimal condition for the task of an industrial articulated robot used in many fields is an important problem to improve productivity. In this paper, a minimum-time trajectory for an articulated robot along the specified path is studied and simulated with a proper example. A general dynamic model of manipulator is represented as a function of path distance. Using this model, the velocity is produced as fast as possible at each point along the path. This minimum-time trajectory planning module together with the existing collision-free path planning modules is utilized to design the optimal path planning of robot in cases where obstacles present.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.46-55
• /
• 2006

In general, 3-dimensional point-mass equation has been widely used for the trajectory optimization of the fixed-wing aircraft and reentry vehicle. But it should be modified and represent target vehicle's own characteristics. For a lighter-than-air vehicle such as an airship, there exists different and peculiar flight characteristics compared with the aircraft. The first part of this paper is to derive the dynamic equation of motion for the mid-altitude unmanned airship and the second part is to obtain the optimal trajectories under the minimal time flight given constraints. The trajectory optimization problem is converted into the nonlinear programming problem using Sequential Quadratic Programming approach. Finally numerical solutions are presented in the last part of the paper.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.826-829
• /
• 1995

In this paper, the problem of minimum-time trajectory planning of a robot manipulator with an arbitrary path is dealt. As for a straight path, the trajectory planning can be done without difficulty since the path is easily parameterized by its length. However, this is not the case for a non-straight path. In this paper, by noting that the others' joint angles and velocities are determined if one joint's angle and velocity are known, we reduce the problem of trajectory planning on a non-straight path to one in the 2-dimensional space of one joint's angle and velocity. Then, by applying the dynamic programming, we achieve the minimum-time trajectory planning. A simulation is done for verifying this.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2370-2378
• /
• 2015

This paper proposes an algorithm using Lagrange interpolation method to realize trajectory planning for torque minimization of robot manipulators. For the algorithm, position constraints of robot manipulators should be given and the stability of robot manipulators should be satisfied. In order to avoid Runge's phenomenon, we set up time interpolation points using Chebyshev interpolation points. After that, we found suitable angle which corresponds to the points and then we got trajectories of joint's angle, velocity, acceleration using Lagrange interpolation method. We selected performance index for torque consumption optimization of robot manipulator. The method went through repetitive computation process to have minimum value of the performance index by calculated trajectory. Through the process, we could get optimized trajectory to minimize torque and performance index and guarantee safety of the motion for manipulator performance.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.445-449
• /
• 1989

Achievement of a straight line motion in the Cartesian space has a matter of great importance. Minimization of task execution time with linear interpolation in the joint space, accomplishing of a approximation of straight line motion in the Cartesian coordinate is considered as the prespecified task. Such determination yields minimum time joint-trajectory subject to input torque constraints. The applications of these results for joint-trajectory planning of a two-link manipulator with revolute joints are demonstrated by computer simulations.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.26.3-27
• /
• 2009

한 기의 영상레이더 위성을 이용하여 동일한 촬영지역에 대해 적절한 기선벡터(Baseline)을 유지하는 두 장(scene)의 영상을 획득하여 그 지역의 정밀 표고차를 추출하는 레이더 간섭계(Interferometry) 임무를 수행하기 위해서는 반복지상궤적을 유지하도록 위성의 궤도를 주기적으로 조정해 주어야 한다. 이 연구에서는 반복지상궤적 유지 정밀도를 극대화시키기 위하여 최적의 기준궤도를 생성하고 이를 유지하기 위한 속도증분 및 궤도 조정 일정을 산출할 수 있는 궤도최적화 S/W 를 개발하였다. 이 연구의 최적 궤도 설계 문제는 다음과 같다. "시작시간 $T_0$에서 초기 접촉궤도 상태벡터 (ECEF 위치 및 속도벡터) $x_0$이고, 지상궤적반복주기 p 이후의 시간 $T_0+p$에서도 초기 접촉궤도 상태벡터와 동일한$x_0$가 되도록 궤도를 유지하려고 할 때, 여명 궤도(dawn-dusk and sun-synchronous orbit)에서 운영되는 위성의 연료소모(또는 속도증분)를 최소화시키는 가상의 궤도조정(maneuver) 횟수, 시기, 크기를 찾아라." 이 연구에서는 궤도최적화 문제를 풀기 위하여 GRACE 중력모델(GGM02C)이 적용된 수치적 방법의 위성궤도예측 알고리즘을 시스템 설계에 적용하였고, 매개변수 최적화 방법 중 구속조건이 있는 비선형 최적화 기법의 하나인 연속 2차 계획법(sequential quadratic programming)을 사용하여 해를 구하였다. 개발된 궤도최적화 S/W의 성능을 분석하기 위하여 고도 550km의 여명궤도를 돌며 지상궤적반복주기가 28일인 영상레이더 위성에 대해 적용하였다. 해석 결과를 통해, 비록 시스템의 비선형이 큼에도 불구하고 최소의 속도증분으로 정밀한 반복지상궤적이 유지됨을 알 수 있었다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.12
• /
• pp.995-1006
• /
• 1989

If robots have the ability to track the parts on a moving conveyor belt, the efficiency of the manipulation tasks will be increased. This paper presents a motion planning algorithm for conveyor tracking. Tracking trajectory of a robot manipulator is determined by belt speed, initial part position, and initial robot position. Torque limit, maximum velocity, maximum acceleration and maximum jerk are also taken into account. To obtain the tracking solution, the problem is converted to the linear quadratic tracking problem. We describe the manipulator dynamics as second order state equation using parametric functions. Constraints on torques and smoothness are converted to those on input and state variables. The solution of the state equation which minimizes the performance index is obtained by dynamic programming method. Numerical examples are then presented to demonstrate the utility of the motion planning method developed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.9
• /
• pp.845-853
• /
• 2012

We propose time-optimal cornering motion trajectory planning and control algorithms for differential wheeled mobile robot with motor actuating voltage constraint, under piecewise constant control input condition. For time-optimal cornering trajectory generation, 1) we considered mobile robot's dynamics including actuator motors, 2) divided the cornering trajectory into one liner section, followed by two cornering section with angular acceleration and deceleration, and finally one liner section, and 3) formulated an efficient trajectory generation algorithm satisfying the bang-bang control principle. Also we proposed an efficient trajectory control algorithm and implemented with an X-bot to prove the performance.