• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2212-2218
• /
• 2012

The purpose of this study was to investigate the influence of different sitting postures on range of motion, strength and proprioceptive sense of neck. Fifteen healthy university students participated in the study. Depending on upright sitting position and slump sitting position, range of motion and joint position sense were measured by using Dualer IQ. Also, the maximum isometric strength and force sense were measured by using linear force. As a result, we found that the maximum angle of neck extension and the maximum isometric strength at flexion were significantly higher in upright posture than in slump posture. Also, the maximum angle of neck flexion and the maximum isometric strength at extension were higher in slump posture than in upright posture. According to the result, proper proprioception can have an beneficial effect on postural revision of neck and body by providing the information that cognize the position of head through and sustain upright posture.

• 한국체육학회지인문사회과학편
• /
• v.54 no.5
• /
• pp.829-840
• /
• 2015

The purpose of this study was to investigated into the kinematics and ground reaction force for gait on induced stereoacuity in normal subjects with normal sight. Eighteen subjects who passed the stereoacuity testing were participated in the experiment(age: 22.1±2.7 years, height: 176.8±4.4 cm, weight: 67.6±5.8 kg). The study method adopted 3D analysis with six cameras and ground reaction force with two force-plates. The results were as follows; In gait velocity, obstacle crossing gait was slower than flat gait. In angular displacement of hip joint, mostly obstacle crossing gait was more flexed than flat gait. In angular displacement of knee joint, obstacle crossing gait was more flexed than flat gait, and stereoacuity reduction gait in TO and FC2 were more flexed than normal vision gait. In angular displacement of ankle joint, obstacle crossing gait in FC2 was more flexed than flat gait. In trunk tilt, obstacle crossing gait in MSt, TO and MSw were more extended than flat gait. In GRF, there was no significant in Fx, obstacle crossing gait in right and left foot were bigger propulsion force than flat gait, obstacle crossing gait in right and left foot were bigger braking force than normal vision gait in Fy, and obstacle crossing gait in right and left foot were bigger than flat gait in peak F1 and peak F2 of Fz, and stereoacuity reduction gait in right foot was lower than normal vision gait in valley force of Fz.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.3
• /
• pp.68-75
• /
• 2004

Recently, need of the parallel manipulator requiring superior precision is increasing for medical application and precision manufacturing. In this study, we convert a given complex translation trajectory of the moving platform into a set of segments and hence a complex motion of the moving platform can be tractable and easily controled in a very limited workspace. In addition force exerted. to each link is minimized so that the minimized force can be transmitted to the end effector of the moving platform. An user friendly program is developed to design Gough-type 6DOF parallel manupulator based on the proposed method.

• Journal of Oral Medicine and Pain
• /
• v.31 no.4
• /
• pp.365-373
• /
• 2006

This study suggested correction of excessive mouth opening or maximum occlusal contact to analyse occlusal contact time, occlusal contact number and force through evaluation of occlusal pattern in policemen with temporomandibular disorders. The community of policemen influence on temporomandibular disorder's development and progress due to other condition of mouth opening and maximal occlusal contact. Repeated training or changes of usual life style may cause imbalance of stomatognathic system including the masticatory muscle, then develop or aggravate pain of temporomandibular joints and associated structures. This study uses T-scan II system(Tekscan Co., USA) for evaluation on occlusal pattern may influence temporomandibular disorders, and then the subjects take a sensor at 20 mm opening for maximal occlusal contact force. The policemen with temporomandibualr disorders get more long time on maximum contact timing, more short on end contact timing, and more force on end contact force than general society's. So they get closure of mouth with more short time and more force, then transfer remaining load to temporomandibular joint. There are no statistically significances between affected side and occlusal pattern of occlusal contact time and force. There are Left -right dental arch imbalances seems on Rt. dental arch if affected side is right and Lt. dental arch if affected side is left. In above results, It's worth due consideration that policemen with temporomandibular disorders get more smooth mandibualr movement and less force on maximal occlusal contact position.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.7 no.2
• /
• pp.75-83
• /
• 2008

과사용 증후군은 정상적인 조직에 최대하 부하(submaximal stress)가 지속되어 발생하는 것이다. 이와 같은 현상은 연부조직의 접합부(junction)에서 주로 일어나며 힘의 전달이 집중되는 곳, 조직의 역학적 성질이 변화되는 곳, 그리고 성장시 빨리 변화하는 성질이 있는 곳에 주로 생긴다. 근육의 불균형이 과사용 증후군의 가장 많은 원인이다. 과거의 부상 이후 부적절한 재활치료 및 각형성 또는 회전 부정정렬(angular and rotational malalignment) 등이 과사용 증후군의 원인이 될 수 있다. 스포츠 훈련 방법의 실수로도 과사용 증후군이 생길 수 있다. 전방 슬관절 동통시 감별해야 할 질환들은 jumper's knee, 슬개건염 혹은 대퇴 사두건염, Osgood-Schlatter 병, Sinding-Larsen-Johansson 병, 슬개골 연골 연화증, 슬개골 전(prepatellar) 혹은 슬개골 하(infrapatellar) 점액낭염, Hoffa's fat pad의 염증, 그리고 특발성 전방 슬관절 동통 증후군(idiopathic anterior knee pain syndrome)등이 있다. 후방 슬관절 통증의 원인 질환으로는 만성 슬와근 염좌, 슬괵건 점액낭염, 경골 골간단의 피로 골절 등이 포함되며 외측 슬관절 통증의 원인으로는 장경대 충돌 증후군(iliotibial band friction syndrome)등이 있을 수 있다. 이외 과사용 증후군과 관련된 슬관절 통증의 원인으로 다분 슬개골(multipartite patella), 내측 경골 스트레스 증후군(medial tibial stress syndrome), 박리성 골연골염, 반월상 연골의 퇴행성 변화 등이 있을 수 있다. 과사용 증후군의 진단 및 치료의 일반적인 접근법은 다섯가지 단계의 프로그램으로 요약될 수 있다. 첫째, 원인 요소를 확인하고, 둘째, 요소를 변경시키고, 셋째, 통증을 조절하고, 넷째, 능동적 재활을 시키고, 그리고 다섯째, 유지시키는 것이다.

• Journal of Oral Medicine and Pain
• /
• v.26 no.3
• /
• pp.301-308
• /
• 2001

지금까지 여러 가지 형태의 기기를 이용하여 보고된 사람의 교합력은 그 최대치가 매우 다양하다. 본 연구에서는, 교합력을 측정하기 위하여 새로운 측정기기를 개발하였다. 본 기기를 이용하여 전치부 교합력 측정 시에는 대칭적으로 최대한 물도록 하악을 유도하여 최대 교합력을 측정하였고, 구치부는 편측으로 물도록 하악을 유도하여 최대 교합력을 측정하였다. 교합 시 치아간 수직고경은 15.1mm 였다. 측정기기 내 strain gauge를 사용하여 전기저항의 변화를 힘으로 전환하였다. 마이크로 프로세서가 수치를 계산하면 액정화면에 수치가 표시된다. 실험실 내 기기교정 검사에서는 50kg과 100kg의 부하를 가하였다. 개발된 교합력 측정기기의 임상적 신뢰도를 시험하기 위해 건강한 치과대학 재학생 10명을 대상으로 최대 교합력을 측정 하였다. 이 새로운 측정기기로 측정된 교합력은 이전연구에서 기록되었던 것보다 더 높은 수치가 나왔다. 또한 제1대구치와 전치부에서 최대 교합력을 측정한 경우 실험자 내와 실험자 간에 통계적으로 유의한 신뢰성을 얻을 수 있었다. 본 기기는 안정적이고 조작성이 쉽다고 판명되었다. 그러므로, 본 기기는 더 큰 연구 집단의 선별검사에 매우 유용하게 사용할 수 있을 것이며, 또한 치주질환이 있는 치아나 임플란트, 악관절 장애를 가진 환자의 교합력 측정과 같이 특정된 경우의 교합력 측정에도 유용할 것이다.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.435-441
• /
• 2012

This study is intended to provide a basic clinical data useful for preventing shoulder injuries related to occupation and curing them, by measuring the shoulder muscle activity of normal adults in an arm posture type of a wide shoulder joint angle, according to several differences of hand grip force. In order to examine the shoulder muscle activity during hand grips at a variety of intensity, according to the arm posture type, MVCs of all subjects were measured, and %MVCs of anterior deltoid, supraspinatus, the upper trapezius and infraspinatus at 0 degree, 90 degrees and 160 degrees of shoulder angle were yielded according to the grip force in an arm posture type, changing the maximum grip force into 30%, 50% and 90%, randomly. When measuring the hand grip at 30%, 50% and 70% of the maximum grip force to compare %MVC of each group depending on the arm posture type, there were no significant differences of muscle activity at 0 degree of shoulder angle among anterior deltoid, supraspinatus, the upper trapezius and infraspinatus, but there were significant differences of it among them at 90 degrees and 160 degrees of should angle(p<.001). According to the results of post-hoc test, also, anterior deltoid had the highest muscle activity, whereas the upper trapezius had the lowest muscle activity.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.77-81
• /
• 2008

The goal of rotator cuff repairs is to achieve high initial fixation strength, minimize gap formation, maintain mechanical stability under cyclic loading and optimize the biology of the tendon-bone interface until the cuff heals biologically to the bone. Single row repairs are least successful in restoring the footprint of the rotator cuff and are most susceptible to gap formation. Double row repairs have an improved load to failure and minimal gap formation. Transosseous equivalent repairs (suture bridge technique) have the highest ultimate load and resistance to shear and rotational forces and the lowest gap formation. Even though the superior advantages of double row and transosseous equivalent repairs, those techniques take longer surgical time and are more expensive than single row repairs. Therefore single row repairs can be useful in bursal side partial thickness or small size full thickess rotator cuff tear.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.91-107
• /
• 2002

This research got the following conclusion as result that analyzed high clear action kinematically to 4 C girls' junior high school badminton players who are situated in Chungchong-bukdo. 1. Most of the subject didn't rotate their right shoulder and elbow joint at back swing and moved speedy to shuttle cock. And an cooperation action of joint decreases displaying only a good action on both subject`s specification joint part. 2. When the subject S1 and S2 swing slowly and largely the joint of shoulder and elbow and then the speed of right wrist and racket head is fast, the cooperation action of joint is better than other subject. 3. An angle change of right shoulder showed angle that all subjects are great being caused in softness of joint and angular velocity was exposed that load enough Impact force and increase the speed of racket head as angular velocity decreases rapidly in Impact except subject S3. 4. All subjects of right elbow angle change showed similar form and was exposed that subject S2 sees form of impact stage serious bends from back swing and do not use force effectively in angular velocity. 5. Angle of right wrist appeared that the speed of shuttle cock is decelerated because fast bends of wrist is not formed shortly after Impact because all subject do not accomplish big angle shortly after back swing. Angular velocity can assume that the subject S1 and S4 are using and move fast strong snap shot offering angular velocity value of Impact stage sound (-). 6. While size of Impact stage knee angle accomplishes angle that is big both subject, hip joint angles sees small angle and is playing swing that do on upper body and arm without using strong waist force that is composition action with knee and hip joint.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1301-1307
• /
• 2011

Electrosurgical knee wand (EKW) is a high-frequency thermocautery instrument and is often used for coagulation, ablation, excision, and extirpation of knee ligaments and tissues. In order to maximize the success rate, ease, and safety of knee surgery using EKW and radiofrequency ablation, it is necessary to ensure that the EKW selectively approaches the lesion with utmost accuracy and safety. The key feature of this instrument is its excellent maneuverability. Hence, the authors constructed a tensile spring model based on a shape memory alloy (SMA), which exhibits the shape memory effect. This model can be used in knee surgery as it is considered the most biocompatible femorotibial surgical actuator. The changes in external temperature with current and the thermoelectric characteristics of the SMA were investigated. The relationship between the restoring force and the typical stroke (TS) in response to the conditions in the SMA tensile spring design were evaluated. In conclusion, as the diameter of the SMA tensile spring decreased, the maximum temperature increased. The strain in the actuator caused a stable and proportional increase in the force and induced current for up to 15s, but this increase became very unstable after 30s. Moreover, the relationship between the current and the TS was more stable than that between the current and the restoring force.