• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.285-292
• /
• 2020

Because the inner environment of greenhouse has a direct impact on crop production, many studies have been performed to develop technologies for controlling the environment in the greenhouse. However, it is difficult to apply the technology developed to all greenhouses because those studies were conducted through empirical experiments in specific greenhouses. It takes a lot of time and cost to develop the models that can be applicable to all greenhouse in real situation. Therefore studies are underway to solve this problem using computer-based simulation techniques. In this study, a model was developed to predict the inner environment of glass greenhouse using CFD simulation method. The developed model was validated using primary and secondary heating experiment and daytime greenhouse inner temperature data. As a result of comparing the measured and predicted value, the mean temperature and uniformity were 2.62℃ and 2.92%p higher in the predicted value, respectively. R² was 0.9628, confirming that the measured and the predicted values showed similar tendency. In the future, the model needs to improve by applying the shape of the greenhouse and the position of the inner heat exchanger for efficient thermal energy management of the greenhouse.

• Korean journal of applied entomology
• /
• v.23 no.1 s.58
• /
• pp.49-55
• /
• 1984

This study was carried out to investigate the biological performance of the brownplanthopper, Nilaparvata lugens Stal, reared on rice plants at different growth stages; maximum tillering, booting, heading with and without panicles, and milking. The results obtained are as follows: The rice plants at the maximum tillering stage gave the best in the longevity, oviposition period, and the total number of oviposited eggs for the macropterous females, and the worst with the booting stage. For the brachypterous females, however, the best results were obtained from the rice of which their panicles had removed after heading. There was no significant difference in the hachability of eggs and the developmental period of the nymphs in the next generation, but the nymphal mortality was the highest with the milking stage and the lowest with the maximum tillering and heading stage without panicles. The longest life span was shown in males derived on the maximum tillering stage, and the shortest for milking(macropterous type) or booting (brachypterous type) stages. Coefficientes of variances in longevity and number of eggs for the adults emerged from heading stage without panicles were lower than those with panicles intact, and such trend was more obvious in brachypterous adults, especially for the females. The biological performances of the BPH have close relationship with the translocated organic material at the feeding site which showed considerable difference with the growth stages of the rice.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.6
• /
• pp.59-76
• /
• 2015

Recent wide spread of embedded devices and technology growth of broadband communication has led to rapid increase in the volume of created and managed data. As a result, data centers have to increase the storage capacity cost-effectively to store the created data. Data deduplication is one way to save the storage space by removing redundant data. This work propose IO extent based deduplication schemes called CORE-Dedup that exploits content-preserving access locality. We acquire IO traces from block device layer in virtual machine host, and compare the deduplication performance of chunking method between the fixed size and IO extent based. At multiple workload of 10 user's compile in virtual machine environment, the result shows that 4 KB fixed size chunking and IO extent based chunking use chunk index 14500 and 1700, respectively. The deduplication rate account for 60.4% and 57.6% on fixed size and IO extent chunking, respectively.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.225-236
• /
• 1996

Computer simulation methods for three area of textile design, wearing, and design were developed by using CAD system, and its results were applied to pattern design simulation. Textile design created by using the CAD system was applied to T-shirt schematization. Created wearing, printing, and knitting design respectively were applied to women clothing, children's wear, and men sweater. In this rearch, several equipped since various color working, materials, pattern development and swift intention decision of goods direction are possible on the moniter. Third, many goods order are rushed within short time because spot direction are possible on the moniter. Third, many goods order are rushed within short time because intention decision of buyer could be induced and embodied design almost reflection the buyer's will on the spot before production of goods and samples. Forth, time and expense were saved to get the information in terms of design information systematically and could be managed annually. Fifth, creative design development can be not only availed but saved the service expense of outside orders and the traffic expense.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1992.10a
• /
• pp.3-3
• /
• 1992

타이어 Curing공정은 공기압 타이어의 제조시 상당히 정교한 단계를 거쳐서 이루어지며, 이는 타이어 설계에 큰 영향을 줄 뿐만아니라, 타이어의 성능에도 관건이 있다. 본 연구에서는 유한요소법을 이용하여 타이어의 molding 공정을 분석하였다. 유한요소해석 프로그램인 MARC가 Cured 타이어 내부의 Curing Bladder 팽창과정해석에 이용되었다. 비압축성 요소로 Curing Bladder를 모형화하였으며, MARC의 접촉문제해석기법(contact option)을 이용하여 Cured 타이어 내부와 Curing Bladder 외부의 접촉부위를 Simulation하였다. 본 연구의 주요 관심내용으로서는 Curing Bladder의 형상변화에 따른 Curing Bladder의 팽창거동해석과, Cured타이어와 Curing Bladder의 접촉부위에서 얻을 수 있는 접촉압력의 비교.검토이다. 타이어 Curing시 타이어와 Bladder의 Contact과정을 해석하여, 아래와 같은 결과를 도출하였다. Bladder의 형상은 Cylinderical 형상 보다는 Toroidal 형태가 접촉압 분포의 균일성 및 크기 측면에 서 우수한 것으로 판단된다. Curing Bladder의 증심선 부위 보다 이에서 약간 떨어진 부위에서 최대 접촉압력이 발생되며, 이는 타이어 내면의 굴곡현상과 깊은 관련이 있윰 것으로 사료된다. 타이어 Bead부의 Carcass 자연평형현상이 유지된 제품을 얻기위해서는, Side-Bead구간의 접촉압력 증가가 필요하며, 이를 위하여는 Bladder 형상이 Cylinderical 보다는 Toroidal 형태가 유리하고, Bead부의 Gage Down, 전체직경의 증가 및 높이의 증가가 유리한 것으로 판단된다. 본 연구 결과를 이용하여, 타이어 Curing과정에서 발생되는 불량제품의 원인파악 및 타이어 설계자가 원하는 제품생산의 불가능한 원인을 파악하는데 도움을 줄 것이다.를 C의 structure와 pointer를 기반으로 하게끔 변경시키고 이에 따르는 제반 변경 사항을 수정 보완하여 프로그램의 분석을 용이하게 하며 기능의 변경 및 추가가 수월하게 하였고 메모리를 동적으로 관리할 수 있게 하였다. 또한 기존의 smpl에 디버깅용 함수 및 설비(facility) 제어용 함수를 추가하여 시뮬레이션 프로그램 작성을 용이하게 하였다. 예를 들면 who_server(), who_queue(), pop_Q(), push_Q(), pop_server(), push_server(), we(), wf(), printfct() 같은 함수들이다. 또한 동시에 발생되는 사건들의 순서를 조종하기 위해, 동시에 발생할 수 있는 각각의 사건에 우선순위를 두어 이 우선 순위에 의하여 사건 리스트(event list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.10 mm/hr 의 범위로서 이로 인한 강우손실량은 큰 의미가 없음을 알았다.재발이 나타난 3례의 환자를 제외한 9례 (75%)에서는 현재까지 재발소견을 보이지 않고 있다. 이러한 결과는 다른 보고자들과 유사한 결과를 보이고 있지만 아직까지 증례가 많지 않기 때문에 생존율을 얻

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.16-27
• /
• 2019

A burning test was conducted on the smoke and combustion gases generated from cypress wood treated with sodium silicate, 3-aminopropyltrimethoxysilane sol, 3-(2-aminoethylamino)propylmethyldimethoxysilane sol, and 3-(2-aminoethylamino) propyltrimethoxysilane sol. The silicone compound sol was applied to each of the cypress wood specimens three times with a brush. The smoke and combustion generation gas were analyzed using a cone calorimeter (ISO 5660-1) and the smoke was also evaluated by applying new smoke risk assessment method. The smoke performance index (SPI) of the cypress treated with silicone compound increased 1.66 to 8.42 times and the smoke growth index (SGI) was 11.8 to 88.2%, respectively. The smoke intensity (SI) is expected to be 1.0~50.5% lower than that of the base specimens, resulting in lower smoke and fire hazards. The third maximum carbon monoxide (CO_peak) concentration of the specimens treated with silicone compounds was 22.5~33.3% lower than that of the base specimens. On the other hand, it produced potentially fatal toxicity that was 1.48~1.72 times higher than the US Occupational Safety and Health Administration (OSHA) acceptance standard (PEL). Cypress wood itself produced a high carbon monoxide concentration, but the silicon compound played a role in reducing this level.

• Journal of Korea Water Resources Association
• /
• v.38 no.7 s.156
• /
• pp.565-574
• /
• 2005

It is used water quality data that was measured at Pyeongchanggang real time monitoring stations in Namhan river. These characteristics were analyzed with the water qualify of rainy and nonrainy periods. TOC (Total Organic Carbon) data of rainy periods has correlation with discharge and shows high values of mean, maximum, and standard deviation. DO (Dissolved Oxygen) value of rainy periods is lower than those of nonrainy periods. Input data of the water quality forecasting models that they were constructed by neural network and neuro-fuzzy was chosen as the reasonable data, and water qualify forecasting models were applied. LMNN, MDNN, and ANFIS models have achieved the highest overall accuracy of TOC data. LMNN (Levenberg-Marquardt Neural Network) and MDNN (MoDular Neural Network) model which are applied for DO forecasting shows better results than ANFIS (Adaptive Neuro-Fuzzy Inference System). MDNN model shows the lowest estimation error when using daily time, which is qualitative data trained with quantitative data. The observation of discharge and water quality are effective at same point as well as same time for real time management. But there are some of real time water quality monitoring stations far from the T/M water stage. Pyeongchanggang station is one of them. So discharge on Pyeongchanggang station was calculated by developed runoff neural network model, and the water quality forecasting model is linked to the runoff forecasting model. That linked model shows the improvement of waterquality forecasting.

• Journal of Korea Water Resources Association
• /
• v.48 no.10
• /
• pp.857-868
• /
• 2015

Hydraulic and water quality models with high reliability are necessary for the efficient management of water quality in the reservoir. The model capacity can be demonstrated by the application for the various hydrological conditions. CE-QUAL-W2 model is laterally averaged two-dimensional hydraulic and water quality model. The W2 model, which is suitable for the narrow reservoir like the Jinyang reservoir as compared with the depth and length of waterbody, has been frequently used by many researchers. Namgang watershed is expected to increase the water demand. In this study, the W2 model is validated under two different hydrological conditions; wet year (2011) and normal year (2009). Using hydrological and water quality condition for calibration, 2011, the effect of water intake increase was simulated. The simulation results showed that the increase of water intake led to increase the concentrations in total nitrogen, total phosphorus and Chlorophyll-${\alpha}$ concentration. Especially the concentration increase was appeared during the dry season in each of up to 62.53% (Total nitrogen), 39.07% (Total phosphorus) and 232.19% (Chlorophyll-${\alpha}$). The changes of chlorophyll-${\alpha}$ is similar to those of total phosphorus concentration.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.527-534
• /
• 2006

The purpose of this study is the development of more effective filter-type polymer adsorbent for removal of anionic pollutants from wastewater. In order to synthesize the polymer adsorbent that possesses anionic exchangeable function, carboxyl(-COOH) group of PP-g-AA nonwoven fabric was converted into amine($-NH_2$) group by the chemical modification using diethylene triamine(DETA). FT-IR data indicate that amine group was introduced into PP-g-AA through amidation of grafted acrylic acid by reaction with DETA. The degree of amination increased with increase in the reaction time and temperature of the chemical modification process, and was significantly improved by the pre-swelling treatment of PP-g-AA with solvent and addition of metal chlorides as a catalyst in following order as $NH_4OH>MeOH{\geq}HCl{\geq}H_2O\;and\;AlCl_3>FeCl_3{\geq}SnCl_2{\gg}ZnCl_2{\geq}FeCl_2$, respectively. However, the addition of catalyst limited the reusability of DETA, hence was less useful from the viewpoint of cost effectiveness and waste management. The anion exchange capacity of the aminated PP-g-AA(PP-g-AA-Am) increased with increase in the degree of amination, but it reached maximum value at the degree of amination as about $50{\sim}60%$. The anion exchange capacity of PP-g-AA-Am was higher than those of commercial anion resins.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.4
• /
• pp.386-394
• /
• 2002

Carrying capacity model focused on interactions between the filter-feeder growth and their environments is presented, and differences among existing various carrying capacity models are reviewed. For carrying capacity modeling of shellfish system, we constructed a new numerical model coupled oyster growth model with an ecosystem model (EUTRP2). Physical and biological processes such as water transport and mixing, primary production, feeding and growth of the cultivated oyster, Crassostrea gigas and benthic-pelagic exchange were included in the model, Simulated results for validation showed that the more phytoplankton biomass decreased, the more oyster meat weight and nutrients increased, suggesting a powerful tool for reasonable management of shellfish aquaculture. The model was sensitive to parameters controlling the primary production. Among the ecosystem compartments, the oyster growth is highly influenced by small changes in the physiological parameters of phytoplankton and oyster. This sensitivity analysis indicated the importance of experimental data on biological parameters for calibration of the model.