• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.7
• /
• pp.872-880
• /
• 1999

This paper presents an algorithm that can calculate the evaluation index of power system from the transfer capability point of view. The algorithm adopts a successive linear programming skill to solve an optimal solution. Two indices which are transfer margin index and economic matching index have been developed. Prior to calculating these indices, Maximum Load supplying Capability(MLSC) and Economic Load Supplying Capability(ELSC) are utilized as basic data. For man-machine interface, graphical user interface has been implemented so that an unified software package PSTCP(Power System Transfer Capability Program) has been developed. KEPCO systems planned up to 2006 year have been tested to show effectiveness and usefulness of the PSTCP for power system planning stages.

• Journal of Energy Engineering
• /
• v.7 no.2
• /
• pp.172-179
• /
• 1998

In this paper, an alternative method which can evaluate a marginal power exceeding yearly peak load for each load bus is proposed. The proportion of the marginal power to yearly peak load for each load bus is defined as Local Marginal Power Rate (LMPR). Furthermore, the composite system is separated base on the LMPR. The bottleneck facilities could be found, while the LMPR is estimated. Then, it is possible to provide information concerning improvement in the system reliability by bottleneck facilities. The IEEE Reliability Test System (RTS) is used to demonstrate the effectiveness of the proposed algorithm.

• Food Science and Preservation
• /
• v.11 no.2
• /
• pp.250-256
• /
• 2004

The objectives of this study were to develop a new commercial grain cooler suited to domestic weather and post-harvesting conditions for paddy, and to evaluate the performance. A prototype grain cooler capable of cooling paddy of 200 tons within 24 hours was developed. The grain cooler was designed to control the refrigeration capacity from 0 to 100% by controlling the capacity of compressor with unloading solenoid valve and by changing the flow rates of hot refrigerant gas flowing into reheater and evaporator from compressor. And a controller with one chip microprocessor was developed to control temperature and relative humidity of cooling air. The maximum cooling capacity of the grain cooler was 35,284㎉/hr at condensing/evaporating pressure of 16.5/3.6 kgf/$\textrm{cm}^2$. Maximum flow rate of cooling air was 120 ㎥/min at static pressure of 279 mmAq. The total maximum required power was 22.8㎾, and total required energy was saved from 26.7 to 33.3% of maximum power depending on operating conditions. The coefficient of performance of refrigeration devices and total coefficient of performance of the grain cooler were 4.71 and 1.8, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.123-127
• /
• 2021

Millimeter-wave tracking radars should be operated in various environmental restrictions, thus they demand more computing power and smaller size compared to conventional tracking radars. This paper presents the design and implementation of the compact power supply for millimeter-wave tracking radar applications. To meet requirements of low voltage/high current and voltage accuracy for FPGA/DSP digital circuits, Point of Load (POL) converters are used in order to enhance power density and system efficiency. LDO (Low Dropout) is applied for the output voltage under the light load condition, then the single-input-multi-output power supply with max power of 375 W and 8 outputs is developed. The proposed power supply achieves output voltage accuracy of ±2 % and noise level of <50 mVpp % under full load conditions.

• Journal of the Korean Institute of Gas
• /
• v.15 no.3
• /
• pp.19-25
• /
• 2011

Generally, the generation methods of cooling energy are electric air conditioning (EAC) and gas air conditioning (GAC). The EAC system is caused by increasing peak power during summer. Because the electric energy has a characteristic of non-storage, the peak electric load has been issued social problem annually whether the facility to supply is enough or not. Another way to supply cooling energy, GAC system is worked by gas energy. The absorption chiller and gas engine heat pump have been commercialized for cooling. However, the total capacity of GAC is much less than EAC and it almost depends on EAC for small market. This paper described the status of cooling energy consumption in domestic and expected the cooling energy to be consumed by electric and gas energy up to 2024 year. And also the benefit of GAC was analyzed with the case of its expansion and it was aimed to give background to fit the GAC policy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.480-484
• /
• 2008

셀렝게(Selenga)강은 몽골에서 발원하여 세계최대의 담수호로 알려진 러시아 바이칼호로 유입되는 국제하천으로서 소비에트 연방해체 이후 계획경제가 무너지면서 다양한 물환경문제에 노출되어 있다. 몽골의 경우 도시개발이 급격히 진행되고 있으나 처리시설의 미비로 인한 오폐수 배출 및 무분별한 광산개발에 따른 수질오염문제가 현안이 되고 있으며, 러시아(브리아트공화국)는 계획경제의 붕괴에 따른 산업구조의 변화, 처리시설의 부족 및 운영의 비효율성, 산림자원의 개발에 따른 비점오염부하의 증가 등의 수질문제 해결이 요구된다. 몽골은 자연적인 특성상 광물질을 많이 포함하는 지표수 성상 및 매우 적은 강우량으로 인한 수자원의 부족, 지역별로 극심한 물공급량의 불균형, 산업개발에 따른 지하수 오염 등의 문제를 포함한 수자원 부족이 해결해야할 현안과제이고, 러시아는 수자원은 매우 풍부하나 공급시설의 낙후 및 비효율적인 운영으로 인한 물 공급 시스템의 개선이 절실히 요구되는 상황이다. 물 환경관리 체계를 보면 양국 공히 대내적으로는 이용 및 공급 주체별로 분화된 물 관리체제로 인해 부문간 통합성이 결여되어 있으며, 대외적으로는 셀렝게강 상 하류 물이용 개발, 수질보전 및 수생태계보호와 연관된 문제해결을 위한 몽골과 러시아간의 국제적인 협력시스템이 없는 실정이다. 경제개발에 따라 최근 수질오염 및 물이용 개발과 관련된 이해당사자 간의 갈등이 심화되고 있어 이를 지역, 국가, 국제적인 차원에서 조정할 수 있는 통합관리시스템의 구축과 이해당사자의 인식제고 및 자체적인 관리능력 배양을 위한 역량강화프로그램의 개발 운영이 요구되고 있다. 따라서 본 연구에서는 동지역에서 기초현황조사, 물 환경현안 파악, 물 관리정책 및 체계와 문제점을 파악하고 향후 DPISR(Drivers-Pressures-Impact-State- Response) 분석이 가능하도록 물환경관리와 연관된 물환경상태, 현안, 원인, 영향 및 대책을 종합적인 관점에서 분석하며, 해외의 주요 국제하천의 물 환경관리모델에 대한 사례분석 및 비교연구를 통해 물이용 및 개발과 관련된 이해상충 조정체계를 개발하고자 하였다.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.23-31
• /
• 2017

Numerical study was conducted for the effects of various burner array on the workpiece and the gas temperature in a continuos reheating furnace. Under the same conditions which were the total heat of combustion, the heat capacity of unit burner, the number of burner and burner array were changed to be applied the furnace. The behavior of workpiece temperature and gas temperature in a furnace were evaluated for the effects as function of the changed conditions. A continuous reheating furnace designed for 110 tons/day of production capacity was applied in this study. The furnace which has several gas burners is designed to heat a workpiece. By this study, the better condition was confirmed than the existing designed condition.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.431-438
• /
• 2016

This study will be targeting 21-24 years old college students majoring in physical education. This study covers the effect of kinesiology taping and icing treatment on the recovery rate of blood lactate concentration, and cardiovascular function so that it can provide the basic data for improving physical performance. As a result of this study, Kinesio taping and icing aid the recovery rate of the maximum load of lactic acid recovery rate and 30 minutes after exercise heart rate after exercise, but increased, after 15 minutes, immediately after exercise heart rate, exercise lactate and heart rate, and 30 minutes after exercise lactate showed no difference. In conclusion, Kinesio taping and icing treatment, reduce pain and fatigue but it is not satisfactory. Further study, applying a more accurate and technical form of exercise programs needs to continuously research the effects of Kinesio taping and icing treatment