• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1999.06a
• /
• pp.181-186
• /
• 1999

반복하중에 따른 P.C 구조물의 장착장치로 사용되는 Wedge 형상에 따른 거동특성을 파악하기 위하여 정적최대하중을 이용하여 피로시험을 수행하였다. 또한 피로시험 결과로부터 반복회수에 따른 시험 체의 균열양상, 하중-변위, 하중-변형율, 하중-중앙 최대 변위, 하중-영구 변형량, 반복횟수에 따른 S-N선도 등을 고찰하였다. (중략)

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.121-127
• /
• 2006

It is well known the fact that turbo codes has better performance as the number of iteration and the interleaver size increases in the AWGN channel environment. However, as the number of iteration and the interleaver size are increased, it is required much delay and computation for iterative decoding. Therefore, it is important to devise an efficient criterion to stop the iteration process and prevent unnecessary computations and decoding delay. In this paper, it proposes the efficient stop criterion algorithm for turbo codes using the maximum sign change of LLR. It is verifying that the proposal variable iterative decoding controller can be reduced the average iterative decoding number compared to conventional schemes with a negligible degradation of the error performance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.5 s.335
• /
• pp.39-46
• /
• 2005

It is well known the fact that turbo codes has better performance as the number of iteration and the interleaver size increases in the AWGN channel environment. However, as the number of iteration and the interleaver size are increased, it is required much delay and computation for iterative decoding. Therefore, it is important to devise an efficient criterion to stop the iteration process and prevent unnecessary computations and decoding delay. In this paper, it proposes the efficient iterative decoding stop criterion using the absolute mean value of LLR difference. It is verifying that the proposal iterative decoding stop criterion can be reduced the average iterative decoding number compared to conventional schemes with a negligible degradation of the error performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2143-2149
• /
• 2012

DVB-S2 employs LDPC codes which approach to the Shannon's limit, since it has characteristics of a good distance, error floor does not appear. Furthermore it is possible to processes full parallel processing. However, it is very difficult to high speed decoding because of a large block size and number of many iterations. This paper present HSS algorithm to reduce the iteration numbers without performance degradation. In the flooding scheme, the decoder waits until all the check-to-variable messages are updated at all parity check nodes before computing the variable metric and updating the variable-to-check messages. The HSS algorithm is to update the variable metric on a check by check basis in the same way as one code draws benefit from the other. Eventually, LDPC decoding speed based on HSS algorithm improved 30% ~50% compared to conventional one without performance degradation.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.29-35
• /
• 2017

Quality changes of dried sea cucumber (Stichopusjaponicus) after applying a cyclic rehydration and retorting process were investigated during 4 weeks of storage. The length, volume, and weight of dried sea cucumber increased significantly as the number of rehydration cycles increased. Sea cucumber (SC) was bottled in the glass jar and a retort thermal process ($121.1^{\circ}C$, 0.15 MPa) was applied. The total thermal processing time (TTT) was 24 min based on the temperature at the cold point. The size and texture of retorted SC were significantly changed until the first week of storage. However, regardless of the number of rehydration cycles, the size and texture of samples at different rehydration cycles showed no significant difference during the whole storage. The length, volume, weight, rehydration ratio ($R_R$), hardness, and chewiness at the maximum degree of swelling during rehydration of dried SC were estimated as 100.86 mm, 38.62 mL, 41.05 g, 6.39 of $R_R$, $249.19g_f$, and 4.05 mJ, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.37-43
• /
• 2008

The performance and hardware complexity of LDPC decoders depend on the design parameters of quantization, the clipping threshold $c_{th}$ and the number of quantization bits q, and also on the maximum number of decoding iterations. In this paper, the BER performances of LDPC codes are evaluated according to the clipping threshold $c_{th}$ and the number of quantization bits q through the simulation studies. By comparing the quantized Min-Sum algorithm with the ideal Min-Sum algorithm, it is shown that the quantized case with $c_{th}=2.5$ and q=6 has the best performance, which approaches the idea case. The decoding complexities are calculated and the word error rates(WER) are estimated by using the pdf which is obtained through the statistical analyses on the iteration numbers. These results can be utilized to tradeoff between the decoding performance and the complexity in LDPC decoder design.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.9-16
• /
• 2005

It is well blown about the fact that turbo code has better the BER performance as the number of decoding iterations increases in the AWGN channel environment. However, as the number of decoding iterations is increased under the several channel environments, any further iteration results in very little improvement, and it requires much delay and computation in proportion to the number of decoding iterations. In this paper, it proposes the efficient iterative decoding stop criterion algorithm which can largely reduce the computation and the average number of decoding iterations of turbo code. Through simulations, it is verifying that the proposed algorithm can efficiently stop the iterative decoding by using the variance value of LLR and can largely reduce the computation and the average number of decoding iterations without BER performance degradation. As a result of simulation, the computation for the proposed algerian is reduced by about $40\%$ compared to conventional CE algorithm. The average number of decoding iterations for the proposed algorithm is reduced by about $9.94\%$ and $8.32\%$ compared to conventional HDA and SCR algorithm respectively, and by about $2.16\%{\~}7.84\%$ compared to conventional CE algorithm.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.258-265
• /
• 2005

To study the compressive stress, recovery force and permanent strain of foams for footwear midsole, polyurethane(PU), phylon(PH) and injection phylon(IP) foams were repetitively compressed with constant compressive stress. Maximum compressive stress of PU did not decrease with repetitive compression on the constant compressive stress, but that of IP largely decreased. Engineering strain of foams were formed by repetitively compressing the three types of foam. The engineering strain of PU was smaller than that of IP and PH. Compressive stress and recovery force of IP and PH at certain strain were decreased with repetitive compression, but that of PU was not noticeably changed.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.3
• /
• pp.63-73
• /
• 2011

The behavior of laterally cyclic loaded piles is affected by the magnitude and number of cycles of cyclic lateral loads as well as loading method (1-way or 2-way loading). In this study, calibration chamber tests were carried out to investigate the effects of loading method of cyclic lateral loads on the behavior of piles driven into sand. Results of the chamber tests show that the permanent lateral displacement of 1-way cyclic loaded piles is developed in the same direction as the first loading, whereas that of 2-way cyclic loaded piles is developed in the reverse direction of the first loading. 1-way cyclic lateral loads cause a decrease of the ultimate lateral load capacity of piles, and 2-way cyclic lateral loads cause an increase of the ultimate lateral load capacity of piles. The change of ultimate lateral load capacity with loading method of cyclic lateral loads increases with increasing number of cycles. It is also observed that the 1-way cyclic loads generate greater maximum bending moment than 2-way cyclic loads for piles in cyclic loading step and generates smaller maximum bending moment for piles in the ultimate state. It can be attributed to the difference in compaction degree of the soil around the piles with loading method of cyclic lateral loads. In addition, it is founded that 1-way and 2-way cyclic lateral loads cause a decrease in the maximum bending moment of piles in the ultimate state compared with that of piles subjected to only monotonic loads.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1285-1288
• /
• 2015

본 논문에서는 영상인식을 위한 딥 러닝에서 사용되는 매개변수 최적화 방법을 제안한다. 학습 성능에 영향을 미치는 매개변수 중 이미지 배치 사이즈 값, 초기 학습율, 최대 학습 반복 횟수에 대해 상호간의 관계를 분석하고 성능을 개선시키기 위해 값을 최적화하는 방법을 연구한다. 제안된 방법을 통한 개선 정도를 분석하기 위해 매개변수의 변화에 따른 학습 소요 시간, 정확도 향상 추이, 메모리 사용량의 변화를 측정한다. 측정된 학습 소요 시간, 정확도 향상 추이, 메모리 사용량의 변화를 분석한 결과 배치 사이즈와 초기 학습 율은 같은 비율로 반비례하게 값을 적용할 때가 이상적 이였으며 서로 다른 환경에서 각각의 학습 소요시간을 측정하는 것으로 배치 사이즈 값과 초기 학습 율에 따른 최적의 최대 학습 반복 횟수를 획득할 수 있었다.